Hologic SecurViewDX-RT 10.1.2 User guide



SecurView

DX/RT Workstation User Guide Addendum

Using Focus Mode

MAN-05701-002 Revision 001, July 2018 Hologic, Inc. Page 1 of 2

36 Apple Ridge Road, Danbury, CT 06810 USA 800.447.1856

Using Focus Mode

ThisaddendumappliestoSecurViewversions10.1.2andlater.Placethisdocumentwith

yourSecurViewDX/RTWorkstationUserGuideforfuturereference.

InSecurViewversions10.1.2andlater,Focusmodecanbeusedtoeasilyvisualizethe

correlationfromaregionofinterestinaHologicsynthesized2D(Intelligent2D™orC‐

View™)imagetothemostrepresentativereconstructedslice.Focusmodeisavailablein

SingleandDoubletiling.

Note

TheFocusbuttonisdisplayedinthetilewiththesynthesized2Dimageonly

whenthesynthesized2Dimageandthecorrespondingreconstructedslices

hangsidebyside.InDoubletilingtheyneedtohanginadjacenttilesonthe

leftorrightside.



Note

TheFocusbuttonisdisplayedevenifʹOmitTomosynthesistoolsʹis

configuredforthetile.(FormoreinformationonʹOmitTomosynthesistoolsʹ,

seetheSecurViewDX/RTWorkstationUserGuide.)

TouseFocus:



Focus

1. ClickFocusinthetiledisplayingthesynthesized2Dimageorpressthe[V]keyon

thekeyboardtoactivateFocusmodeforthetile.Thepointerchangestoacrosshair

toindicateFocusmodeisactive.



Note

FocusmodeisonlyactiveinthetileinwhichtheFocusbuttonisclicked.



Note

Focusmoderemainsactiveuntildeactivated(seestep3).ToapplyFocusina

singleinstancewithoutactivatingthefeature,pressandhold[CTRL]onthe

keyboardwhileclickingtheleftmousebuttoninthesynthesized2Dimage.

2. Clickonaregionofinterestwithinthesynthesized2Dimage.Theassociated

reconstructedslicetileswitchestothemostrepresentativeslice.

Note

IftheFocusdataiscorrupt,thedisplayedslicemaynotbethemost

representativeslice.

a. Whenthepointerisinthetilewiththesynthesized2Dimage,scrolling(for

example,usingthescrollwheel)isappliedtothetilewiththecorresponding

reconstructedslices.

b. IfCinemodeisappliedtoafocusedreconstructedslice,LocalCinemodeis

appliedautomaticallywiththefocusedreconstructedsliceasthecenterslice.

SecurView® DX/RT Workstation User Guide Addendum

Using Focus Mode

MAN-05701-002 Revision 001, July 2018 Hologic, Inc. Page 2 of 2

36 Apple Ridge Road, Danbury, CT 06810 USA 800.447.1856

Note

ClickingwithinaMagnifierdoesnotactivateFocusmode.



Note

Whenclickingontheimagebackground,nocorrespondingfocused

reconstructedsliceisassigned.Thecurrentlydisplayedreconstructedslice

willnotchange.

3. ClickFocusinthetiledisplayingthesynthesized2Dimageorpressthe[V]keyto

deactivateFocusmodeforthetile.

Note

Focusmodeisnotdeactivatedbyselectinganotherimageevaluationtool.



Note

Focusmodeisautomaticallydeactivatedwhenthecurrenthangingchanges,

forexample,bygoingtothenextorpreviousstepintheReportFlow,

manuallydraggingadifferentimagefromtheMammoNavigator,switching

toadifferentimageineithertileusingtheTomosynthesisNavigation

buttons,orclickingapredefinedhangingbutton.



Hologic SecurViewDX-RT 10.1.2 User guide

Related papers

Other documents