6' 3-Section
Light Stand
NS-DLS75SBK (NOT INCLUDED)
Quick Start Guide
|
NS-DUBR1S
Umbrella Bracket with Flash Mount
Before using your new product, please read these instructions to prevent any damage.
PACKAGE CONTENTS
• Umbrella Bracket with ash mount
• Dual-threaded 1/4" and 3/8" stud
• Quick Start Guide
FEATURES
• Tilt and swivel action adjusts to your lighting needs
• Adjustable locking clamp ts most hot-shoe mount ashes
• Umbrella receptacle with locking knob holds equipment
securely
• Durable metal construction for a rm hold
5
6
7
PRODUCT OVERVIEW
# ITEM
1 Cold Shoe Flash
Mount
2 Screw Lock
3 Umbrella Socket
4 Locking screw
5 Thumb Screw Lock
6 Tension screw
7 Adapter stud
DESCRIPTION
To mount a ash on the
bracket.
Tighten to secure the
umbrella shaft to the
bracket.
Hole for an umbrella
shaft.
Tighten to secure the
bracket to the tripod or
stand.
Tighten to secure a ash
to the bracket.
Loosen to tilt the
bracket. Tighten to
secure in place.
For 3/8” and 1/4-20”
thread mounting on a
tripod or stand.
• Reversible 1/4“ and 3/8” threaded female stud for tripod or
light stand attachment
• Umbrella Bracket works well with:
Dual Layer
Convertible Umbrella
NS-DU33DL (NOT INCLUDED)
Final size (W×H): 304.8 × 76.2 mm
Fold size (W×H): 101.6 × 76.2 mm
NS-DUBR1S_15-0323_QSG_V1_EN_Final.ai 1 4/8/2015 3:19:36 PMNS-DUBR1S_15-0323_QSG_V1_EN_Final.ai 1 4/8/2015 3:19:36 PM
Locking screw
V1 English 15-0323
USING YOUR UMBRELLA
BRACKET WITH FLASH MOUNT
1 Loosen the locking screw.
2 Install the bracket on the top of your
Light Stand
OR
Install the adapter stud on your
tripod or stand and install the
bracket on the adapter stud as
shown (required on most stands or
tripods).
3 Tighten the locking screw to secure
the bracket.
Adapter stud
4 Place your photo ash in the cold shoe ash mount on the top
of the bracket. Tighten the thumb screw lock to secure it.
5 Insert the base of your umbrella into the umbrella socket, then
tighten the screw lock to secure it. Point the ash at the center
of the umbrella.
6 Loosen the tension screw, adjust the tilt, then tighten the
screw to secure the bracket. Then aim for best lighting.
SPECIFICATIONS
• Warranty: 12 months parts & labor
• Dimensions (L x W x H): 3.3 x 1.1 x 4.1 in. (8.3 x 2.7 x 10.5 cm)
• Net weight: .37 lbs (0.17 kg)
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2015 Best Buy. All rights reserved.
Made in China
Cold Shoe Flash Mount
Thumb Screw Lock
Screw Lock
NS-DUBR1S_15-0323_QSG_V1_EN_Final.ai 2 4/8/2015 3:19:36 PMNS-DUBR1S_15-0323_QSG_V1_EN_Final.ai 2 4/8/2015 3:19:36 PM
/
