VESA Counter Stand – Flex Height Z-Shape
(P/N:MMF-STND01-04)
Quick Installation Instructions
INSTALLATION
1. Remove stand from packaging box. Place on top of
counter or if desired, firmly secure the base by bolting
four (4) screws from the bottom of a flat counter
surface through the base plate . (Screws are not
included as they need to suit your specific desktop or
platform thickness) .
2. Remove the plastic cover from behind the VESA
Mounting Plate.
3. Mount any 10”-22” LCD Monitor, All-In-One Monitor, or
Touch Screen to stand by aligning the VESA Pattern
Holes (75mm x 75mm or 100mm x 100mm ) on back
of monitor to the stand’s metal mounting plate.
4. Replace the back plastic cover to the Metal VESA
Mounting plate by securing the four screws provided in
kit.
5. Adjust the stand’s tilt adjustment as desired.
6. Make cable connections as needed.
For additional accessories and other mounting solutions, contact your supplier or visit our website at www.mmfpos.com
VESA Counter Stand - (MMF-STND01-
04)
Inst. Sheet (5-28-2013)
COPYRIGHT BY MMF POS , WHEELING, IL
TOOLS AND HARDWARE REQUIRED
• NO other hardware or tools are included for mounting
stands to a surface. Hardware will need to suit your
specific desktop or platform thickness.
• Phillips Head Screwdriver or power drill will be required
to mount stand to surface (if necessary).
Front View
SPECS
Base: Suitable for any 10”-22” LCD Monitor, All-In-One Monitor
Weight Capacity: 45 lbs
Overall Height : up to 11.75” high
Construction: ABS and sheet-nickel
Finish: UV Paint- Sandblast
Color: Black
VESA
Mounting
Plate
Tilt
Capability
-
Flexible
Height
Back View
Basic Overview
Under Counter
Mounting Holes are
located under Base
/
