VESA Counter Stand - Fixed Height with Cable Management
(P/N:MMF-STND02-04)
Quick Installation Instructions
INSTALLATION
1. Remove stand from packaging box. Place on top of
counter or if desired, firmly secure the base by bolting
three(3) screws from the bottom of a flat counter surface
through the base plate . (Screws are not included as they
need to suit your specific desktop or platform thickness) .
2. Mount any 10”-22” LCD Monitor, touch screen , or All-In-
One Monitor to stand by aligning the VESA Pattern Holes
(75mm x 75mm or 100mm x 100mm ) on back of LCD or
case to the stand’s mounting plate.
3. Adjust the stand’s tilt adjustment as desired.
4. Guide cable connections down and out through the cable
opening.
5. Make cable connections as needed.
TOOLS AND HARDWARE REQUIRED
• NO other hardware or tools are included for mounting
stands to a surface. Hardware will need to suit your
specific desktop or platform thickness.
• Phillips Head Screwdriver or power drill will be required
to mount stand to surface (if necessary).
Basic Overview
Clearance
Cable Slot
SPECS
Base: Suitable for any 10”-22” LCD Monitor,
All-In-One Monitor
Weight Capacity: 45 lbs
Overall Height : 9.05 inch high
Construction: ABS and sheet-nickel
Finish: UV Paint- Sandblast
Cable Management: Designed with opening for easy
and convenient cable access and routing.
Color: Black
VESA
Mounting
Plate
Tilt
Capability
Under-counter
Mounting Holes
Clearance
Cable Slot
For additional accessories and other mounting solutions, contact your supplier or visit our website at www.mmfpos.com
Counter Stand (PN: MMF-STND02-
Inst. Sheet (5-28-2013)
MMF POS, WHEELING, IL
Front View
Back ViewSide View