Atdec V-AT-DB Datasheet

Atdec
Brand
Atdec
Model
V-AT-DB
Category
Mounting kits
Type
Datasheet
A General Features
Technical Specifications
Maximum Load:
6kg (13lbs) per display.
Display Compatibility:
Visidec Focus Double is compatible with most Flat Panel
Displays between 12” and 21” (30cm and 53.5cm) that feature
either 75mm x 75mm (3” x 3”) or 100mm x 100mm (4” x 4”)
VESA mounting hole patterns.
Mounting Options:
Visidec Focus Double includes Bolt Through and Desk Clamp
mounting options. NOTE: Desk Clamp mounting option
is only suitable for displays in side by side
configuration.
• Bolt Through
Suits desktop thicknesses of 12mm - 40mm (
1
/
2
”-1
1
/
2
”)
• Desk Clamp
Suits desktop thicknesses of 12mm - 38mm (
1
/
2
” - 1
1
/
2
”)
6
1
2
4
3
5
B Range of Movement
Included Hardware:
All fasteners and mounting hardware are included.
Tools Required:
Power drill, 9mm (³/
8
”) drill bit, Phillips Head screwdriver.
Cable Management:
Cable management system includes cable slot and cable
management clips.
Colour:
Polished Silver.
IMPORTANT:
Please read the Installation Instructions before
mounting Visidec Focus Double
1 +/-70° tilt adjustment
2 +/-95° portrait/landscape adjustment
3 180° pan adjustment
4 360° articulation of arms
5 240° rotation at shoulder
6 355mm (14”) height adjustment
NOTE:
The back to back monitor configuration
shown can only be used in conjunction with
the Bolt Through mounting option.
The range of movement shown here applies
to both arms of Visidec Focus Double.
934mm
(36¾”)
90mm
(3
9
/
16
”)
D VESA Display Mounting Options
As LCD Manufacturers are constantly releasing new monitor models, Atdec does not accept responsibility if the mounting hole pattern does not comply with the international VESA standards.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 06.07.07
195mm
(7
11
/
16
”)
54mm
(2¹/
8
”)
150mm
(5
7
/
8
”)
467mm
(18
3
/
8
”)
439mm
(17¼”)
68mm
(2
11
/
16
”)
C Overall Dimensions
100mm
(4”)
75mm
(3”)
75mm
(3”)
VESA Mounting Plate
in 75mm x 75mm (3”x 3”)
position
VESA Mounting Plate
in 100mm x 100mm (4”x 4”)
position
100mm
(4”)
E Min/Max Display Distance
Max.
NOTE:
The Visidec Focus Double can be
configured so that the displays are
positioned side by side.
The maximum distance from the pole to the
back of the display will be determined by
the size of the displays.
NOTE:
The back to back monitor configuration
shown can only be used in conjunction with
the Bolt Through mounting option.
The range of movement shown here applies
to both arms of Visidec Focus Double.
Max.
F Desk Mounting Options
Desk Clamp
Desk Clamp suits desktop thicknesses of 12mm - 38mm (½” - 1½”)
39mm
(1½”)
38mm (1½”)
65mm
(2
9
/
16
”)
75mm
(3”)
52mm
(2
1
/
16
”)
Bolt Through
Bolt Through suits desktop thicknesses of
12mm - 40mm (½” - 1½”)
52mm
(2
1
/
16
”)
12mm (½”)
DESK
90mm
(3
9
/
16
”)
Min.
  • Page 1 1
  • Page 2 2

Atdec V-AT-DB Datasheet

Atdec
Brand
Atdec
Model
V-AT-DB
Category
Mounting kits
Type
Datasheet
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents