2. Computers & electronics
  3. Cameras & camcorders
  4. Microscopes
  5. Roche
  6. cobas u 701
cobas u 701

Roche cobas u 701 User manual

  • Hello! I am an AI chatbot trained to assist you with the Roche cobas u 701 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
cobas u 701 microscopy analyzer
Software Flow Chart
c
COBAS, COBAS U and LIFE NEEDS ANSWERS
are trademarks of Roche.
Manufactured in Hungary
for Roche Diagnostics GmbH
© Roche Diagnostics. All rights reserved.
Roche Diagnostics GmbH
Sandhofer Strasse 
 Mannheim
Germany
www.cobas.com
0 6999638018 (03) 2016-07 EN
cobas u 701 microscopy analyzer (software version 2.2.3 and higher)
AdministrationAssistance
Online help
Overview
View messages
Manage test results
Manage sample orders
Manage supplies
Monitoring
View messages
Manage calibrations
Check microscope
Manage supplies
System water
Cuvette
Solid waste
Liquid waste
Log on
Analyzer
Routine
Manage racks
• Delete
• Create
• Edit
• Rack ID
• Assignment (rack type)
• Rack position
Rack ID assignment
Overview (hardware)
About
• Hardware element status
• Due tasks
u701
Initialize system
Perform air purge
Tasks
Manage patients
Manage sample orders
• Delete
• Report
• Create
• Edit
Patient assignment
Sample details
Patient assignment
Show rules
Show images
Review QC results
Manage QC materials
Manage test results
Manage QC
• Delete
• Report
• Edit
• Comment
• Delete
• Activate/deactivate
• Copy
• Create
• Edit
• Delete
• Report
• Send
• Rerun
• Validate
QC chart
Manage ranges
*
User management
System settings
Systemconguration
Result presentation
settings
Validation
Cross-check rules
General
Format particle label
Select measurement units
Change test result order
Change test result order
in report
Measurement settings
• Database limits for samples
• Sample ID (generation
mode)
• Multiple measurements
Audit trail
Message log
QC settings
• Number of QC levels
Rangetableconguration
Limitconguration
Particleconguration
u701
• Active range table
• Warning limits for cuvettes
• Microscopy images
u701
• Hardware element status
• Due tasks
Initialize system
Perform air purge
Wizardsu701
Exchange probe
Fill water container
Exchange cuvette cassette
Empty solid waste
container
Empty liquid waste
container
Check microscope
Adjust racks and tubes
• Delete
• Create
• Edit
• Comment
• Dilution
• Status
Perform maintenance
System statistic
Create problem report
Basicconguration1
• System name
• Language selection
• Password mode
• Alarm sound
• Virtual keyboard
• Automatic logoff
Basicconguration2
• Enable screen sharing
• Enablequantitativevaluesonu701
• Lower measurement limit
• Regional settings
• Change date and time settings
Reportconguration
• Report header
• Printer settings
• Report creation
• Image copy
Versions
Import or export system
settings
• Import system settings
• Export system settings
• Report system settings
Installation
• Install language
Hostconguration
Barcodeconguration
• Enable checksum
• Enable check of length
Warning intervals
• Expiration
• Maintenance
• Preventive maintenance
Export screenshots
Initialize system
Back up database
Restore database
Export data in CSV format
Perform wash
Unload racks
• Create anonymized database
backup
• Enable host connection
• Enable raw data transmission
• Set up host connection
• Host protocol version
Manage sample sequence
numbers ***
Available only with Sample sequence number mode
***
All users can view the settings
*
Item, function summary
• Item
Panel on same screen
Item
To new screen, panel, or callout
Item
Available to all users
Available to users with Supervisor rights only
Available only with input connection unit
**
• Start
• Stop
• Stand by
• Shut down
• E. Stop
• Priority rack **
/