Contec DAI12-4(USB)GY Owner's manual

PC-HELPER

Isolated Analog Output Module for USB

DAI12-4(USB)GY

User’s Guide

CONTEC CO.,LTD.

DAI12-4(USB)GY

i

Copyright

No part of this document may be copied or reproduced in any form

by any means without prior written consent of CONTEC CO., LTD.

CONTEC CO., LTD. makes no commitment to update or keep

current the information contained in this document.

The information in this document is subject to change without

notice.

All relevant issues have been considered in the preparation of this

document. Should you notice an omission or any questionable item

in this document, please feel free to notify CONTEC CO., LTD.

Regardless of the foregoing statement, CONTEC assumes no

responsibility for any errors that may appear in this document nor

for results obtained by the user as a result of using this product.

Trademarks

All company and product names that are referred to in this manual

are generally trademarks or registered trade.

ii

DAI12-4(USB)GY

Product Configuration

- USB module (one of the following products)

[DAI12-4(USB)GY]…1

- First step guide…1

- CD-ROM *1 [API-USBP(WDM)]…1

- Interface connector (plugs) FK-MC0,5/9-ST-2.5…2

- AC adapter (1.5m)…1

- AC cable (1.5m)…1

- USB cable (1.8m)…1

- Rubber feet…4

- Magnet…2

- Warranty Certificate …1

- Serial number label …1

*1 The CD-ROM contains the driver software and User’s Guide

(this guide).

Check the contents to make sure that you have everything listed

below. If you do not have all the items or have any damage,

contact your distributor or CONTEC group office where you

purchased.

V

AG

C

V

A

G

C

AG

V

C

A

G

C

V

RU

N

L

I

NK

0

1

2

3

4

5

6

7

9

A

C

D

E

F

8

0

1

2

3

4

5

6

7

9

A

C

D

E

F

8

Sy

st

em

un

it

CD-

ROM

[

API

-USB

P(W

DM)

]

US

B c

abl

e

P

ro

te

ct

iv

e R

ub

be

r

I

nt

erf

ac

e

con

nec

to

r

plu

gs

Mag

net

Fir

st

ste

p gu

ide

A

C a

da

pt

er

A

C

c

ab

le

W

arr

ant

y Ce

rtif

icate

XX

XXX

XX

XXX

XXXX

XXX

X

S

eri

al n

umb

er

lab

el

W

ar

ra

nt

y

Ce

rt

if

ic

ate

DAI12-4(USB)GY

iii

Table of Contents

COPYRIGHT .............................................................................................. I

TRADEMARKS ........................................................................................... I

PRODUCT CONFIGURATION ..................................................................... II

TABLE OF CONTENTS.............................................................................. III

1. INTRODUCTION......................................................................... 1

SUMMARY ............................................................................................... 1

Features ............................................................................................. 1

Support Software ............................................................................... 3

Accessories (Option) ........................................................................... 4

CUSTOMER SUPPORT ............................................................................... 5

Web Site ............................................................................................. 5

LIMITED ONE-YEAR WARRANTY .............................................................. 5

HOW TO OBTAIN SERVICE ....................................................................... 6

LIABILITY ................................................................................................ 6

USE WITH SAFETY ................................................................................... 6

Notice icon for safety information ..................................................... 6

Operation Precautions ....................................................................... 7

FCC PART 15 Class A Notice ............................................................ 9

Environment .................................................................................... 10

Inspection ......................................................................................... 10

Storage ............................................................................................. 10

2. MODULE NOMENCLATURE .................................................... 11

3. SETUP ...................................................................................... 13

CONNECTION-OVERALL DIAGRAM ......................................................... 13

SETTING A MODULE ID ......................................................................... 14

SETUP FLOW ......................................................................................... 15

SOFTWARE INSTALLATION ..................................................................... 15

Illustration of Menu Screen ............................................................. 15

Installation of API-USBP(WDM) Development Environment ....... 16

CONNECTING TO A PC ........................................................................... 17

SETTING PROPERTIES USING DEVICE MANAGER ....................................... 19

CONNECTING TO AN EXTERNAL DEVICE ................................................ 21

Signal Layout ................................................................................... 21

Connection Method .......................................................................... 22

SAMPLING ............................................................................................. 27

Output range and conversion data .................................................. 27

Settling Time.................................................................................... 29

iv

DAI12-4(USB)GY

INSTALLING THE MODULE ..................................................................... 31

Mounting on a DIN Rail .................................................................. 31

Mounting with magnets .................................................................. 35

Installation Orientation .................................................................. 36

USING SEVERAL MODULES WITH THE SAME MODEL.............................. 37

Setting a Module ID......................................................................... 37

4. APPLICATION DEVELOPMENT ............................................... 39

REFERENCE TO ONLINE HELP............................................................... 39

PRINTING FUNCTION REFERENCE ......................................................... 39

SAMPLE PROGRAM ................................................................................ 40

DISTRIBUTING DEVELOPED APPLICATION ............................................. 40

5. TROUBLESHOOTING ............................................................... 41

TROUBLESHOOTING .............................................................................. 41

Q & A .................................................................................................... 42

DIAGNOSTIC PROGRAM ......................................................................... 44

VERSION UPGRADE ............................................................................... 45

How to Upgrade the Firmware........................................................ 45

RETURNING TO INITIAL STATE .............................................................. 47

6. CONNECTING WITH EXPANSION ACCESSORIES .................. 53

SETTING A DEVICE ID ........................................................................... 55

CONNECTION BETWEEN MODULES ........................................................ 56

Stack Connection Locking Devices .................................................. 56

How the Stack Connection Locking Device Works ......................... 57

Connecting the Module .................................................................... 58

Removing the Module ...................................................................... 59

7. PRODUCT SPECIFICATION ..................................................... 61

HARDWARE SPECIFICATION ................................................................... 61

SOFTWARE SPECIFICATION .................................................................... 62

CIRCUIT BLOCK DIAGRAM ..................................................................... 63

TIMING CHART ...................................................................................... 64

PHYSICAL DIMENSIONS ......................................................................... 65

8. APPENDIX ................................................................................ 67

GLOSSARY ............................................................................................. 67

1. Introduction

DAI12-4(USB)GY

1

1.

Introduction

Summary

This product is a USB2.0 compatible terminal module that extends

the analog output function of USB port of PCs. This product

features 4ch 12-bit analog output and is isolated from the bus line to

the PC. The signal lines can be connected directly to the terminals

on this product. To simplify use in embedded applications, this

product includes a bracket for attaching to a 35mm DIN rail. The

number of output channels can be increased by purchasing an

optional device module. Windows driver is bundled with this

product.

Features

- Conversion speed 10µsec (voltage) or 20µsec (current), 12-bit

resolution, analog output 4ch

This product includes analog outputs (voltage : 10µsec, current :

20µsec, 12-bit, 4ch). Compatible to USB1.1/USB2.0 and capable to

achieve high speed transfer at HighSpeed (480 Mbps). The voltage

or current output range set (voltage : +/-10V, +/-5V, 0 - 10V, 0 - 5V,

current : 0 - 20mA). The range is set by software.

- Isolated from the bus by a digital isolator

This product is isolated by a digital isolator which improves the

noise performance with respect to the PC.

- Equipped with the buffer memory (256K data) which can be

used in either FIFO or ring format

This product includes buffer memory (256K data for analog output)

which can be used in either FIFO or ring format. You can perform

analog output in the background, independent of software and the

current status of the PC.

- Windows compatible driver libraries are attached.

Using the attached driver library API-USBP(WDM) makes it

possible to create applications of Windows. In addition, a diagnostic

program by which the operations of hardware can be checked is

provided.

1. Introduction

2

DAI12-4(USB)GY

- Output signal can be controlled by a clock or various trigger

conditions

The output signal can be started and stopped by software trigger.

The sampling period can be controlled by the internal clock (high-

precision timer included on the board).

- Easy to increase the output channels using an expansion

module

Adding optional modules (up to 3 units) can easily increase the

output channels. The unique structure for connection by stacking

enables easy and compact system configuration.

- Screw-less connector plug facilitating wiring and

plugging/unplugging

Wiring and plugging/unplugging are easy as the screw-less

connector plug is used.

- Capable of being mounted on 35-mm DIN rails

This product is equipped with an attachment for mounting on 35-mm

DIN rails on the back, allowing the module to be attached onto and

detached from DIN rails.

- LabVIEW is supported by a plug-in of dedicated library

Using the dedicated library makes it possible to create each

application for LabVIEW.

1. Introduction

DAI12-4(USB)GY

3

Support Software

It is suggested that support software produced by our company

should be used according to the goal and development environment.

Driver Library API-USBP(WDM) (Bundled)

It is the library software, and which supplies command of hardware

produced by our company in the form of standard Win32 API

function (DLL). Using programming languages supporting

Win32API functions, such as Visual Basic and Visual C++ etc., you

can develop high-speed application software with feature of

hardware produced by our company.

For more details on the supported OS, applicable language and new

information, please visit the CONTEC’s Web site.

1. Introduction

4

DAI12-4(USB)GY

Accessories (Option)

Isolated analog output module: DAI12-4(FIT)GY

(Expansion module for DAI12-4(USB)GY)

AC adapter

(input: 90 - 264VAC, output: 5VDC 2.0A) : POA200-20-2

AC-DC power supply unit

(input: 85 - 132VAC, output: 5VDC 3.0A) : POW-AC13GY

AC-DC power supply unit

(input: 85 - 264VAC, output: 5VDC 2.0A) : POW-AD22GY

DC-DC power supply unit

(input: 10 - 30VDC, output: 5VDC 3.0A) : POW-DD10GY

Check the CONTEC’s Web site for more information on this

product.

1. Introduction

DAI12-4(USB)GY

5

Customer Support

CONTEC provides the following support services for you to use

CONTEC products more efficiently and comfortably.

Web Site

https://www.contec.com/

The latest product information

CONTEC provides up-to-date information on products.

CONTEC also provides product manuals and various technical

documents in the PDF.

Free download

You can download updated driver software and differential files as

well as sample programs available in several languages.

Note! For product information

Contact your retailer if you have any technical question about a

CONTEC product or need its price, delivery time, or estimate

information.

Limited One-Year Warranty

CONTEC product is warranted by CONTEC CO., LTD. to be free

from defects in material and workmanship for up to one year from

the date of purchase by the original purchaser.

Repair will be free of charge only when this device is returned

freight prepaid with a copy of the original invoice and a Return

Merchandise Authorization to the distributor or the CONTEC group

office, from which it was purchased.

This warranty is not applicable for scratches or normal wear, but

only for the electronic circuitry and original boards. The warranty is

not applicable if the device has been tampered with or damaged

through abuse, mistreatment, neglect, or unreasonable use, or if the

original invoice is not included, in which case repairs will be

considered beyond the warranty policy.

1. Introduction

6

DAI12-4(USB)GY

How to Obtain Service

For replacement or repair, return the device freight prepaid, with a

copy of the original invoice. Please obtain a Return Merchandise

Authorization Number (RMA) from the CONTEC group office

where you purchased before returning any product.

* No product will be accepted by CONTEC group without the

RMA number.

Liability

The obligation of the warrantor is solely to repair or replace the

product. In no event will the warrantor be liable for any incidental

or consequential damages due to such defect or consequences that

arise from inexperienced usage, misuse, or malfunction of this

device.

Use with Safety

Please use this product with safety on the basis of understanding

following content.

Notice icon for safety information

In order to prevent personal accident and damage to the machine,

safety information is supplied in this manual by following symbols.

Please operate the machine with safety on the basis of understanding

its content.

DANGER indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury or in property damage.

DANGER

WARNING

CAUTION

1. Introduction

DAI12-4(USB)GY

7

Operation Precautions

Please do not use the product in environments subject to

flammable and corrosive gas. Otherwise, it can bring on

exploding, fire, electric shock and trouble.

- There are switches on the module that need to be set in advance.

Be sure to check its switch settings before using the module.

- Please do not change the module switch settings in an

unauthorized manner.

Otherwise, it can bring about malfunction, heating and trouble.

- Please do not subject the module to impact or bend it.

Otherwise, it can bring about malfunction, heating, trouble and

damage.

- Please do not touch the metallic pins on the external module

connector.

Otherwise, it can bring about malfunction, heating and trouble.

- Please do not connect expansion module when the power for the

module is turned on.

Otherwise, it can bring about malfunction, heating and trouble.

Be sure to turn off the power for the USB module.

- Please do not touch the module with a wet hand when the power

for the module is turned on.

It is danger of electric shock.

Be sure to turn off the power for the USB module.

- If you notice any strange odor or overheating, please unplug the

power cord and USB cable immediately.

Otherwise, it can bring about malfunction, heating and trouble.

In the event of an abnormal condition or malfunction, please

consult the dealer from whom the product was purchased.

- I If you use this product in a noisy environment, attach ferrite

cores to the IO cable to stabilize the operation.

- In order to add functions to the product and perform quality

improvement, the product specification is subject to change

without notice.

Even if you use the product again, please be sure to read the

manual to confirm the content.

- Please do not modify the product.

CONTEC will bear no responsibility for any problems, etc.,

resulting from modifying the product.

- Please do not open the product casing.

CONTEC will disclaim any responsibility for products whose

casing has been opened.

D

AN

GE

R

CA

U

T

I

O

N

1. Introduction

8

DAI12-4(USB)GY

- Regardless of the foregoing statement, CONTEC assumes no

responsibility for any errors that may appear in this document nor

for results obtained by the user as a result of using this product.

- It may cause a trouble in recognizing and operating the device

according to the kind of USB hub. If you use the USB hub, we

encourage you to take advantage of the CONTEC’s product loan

service to confirm operation before purchasing.

- Regarding “CE EMC Directive Notice”.

Please connect the Interface Connector with a shielded cable to

meet the mentioned standard above.

The ferrite core must be installed in interface connecting cable so

that this product may suit the above-mentioned standard.

And USB

connector must be earthed.

Name

Maker

Turn

Quantity

Installation Site

E04SR301334 *

SEIWA

2

1

on USB cable at product side

E04SR241336A *

SEIWA

1

on signal cable at product side

E04SR200917 *

SEIWA

3

1

on AC adapter at product side

* Equivalent product can also be used.

Image diagram

1. Introduction

DAI12-4(USB)GY

9

FCC PART 15 Class A Notice

1. Introduction

10

DAI12-4(USB)GY

Environment

Please use this product in the environment as follows. It can bring

about heating, malfunction and trouble when the product is used in

unauthorized environment.

Environment temperature

0 - 50°C

Environment humidity

10 - 90%RH (No condensation)

Corrosive gases

None

Floating dust particles

Not to be excessive

Inspection

Please regularly perform inspection so as to use the product with

safety.

Storage

Please store the product according to the state in which you

purchased.

(1) Store the module into a storage bag.

(2) Store the module into a box with wrapper.

(3) Please store the module in normal temperature avoiding direct

sunlight, shock and vibration, magnetic field and static

electricity.

*

Mak

e s

ure

tha

t th

e conn

ect

ors

on t

he mod

ule sid

e are corr

ectly

conn

ected

with th

e cable

s

*The ventilation

sl

its

ar

e no

t c

ove

red,

and neither d

u

st

nor

ali

en

sub

stan

ce

is

att

ache

d t

o t

he

vent

ila

tion slits

V

AG

C

V

AG

C

A

V

C

AG

C

V

RUN

LIN

K

0

1

2

3

4

5

6

7

9

A

B

C

D

E

F

8

0

1

2

3

4

5

6

7

9

A

B

C

D

E

F

8

2. Module Nomenclature

DAI12-4(USB)GY

11

2.

Module Nomenclature

Figures 2.1 shows the names of module components.

In the figures, the indicated switch settings represent factory

settings.

DAI12-4(USB)GY

Figure 2.1. Nomenclature of Module Components

< DAI12-4(USB)GY >

Table 2.1. The List of Status LED Functions

< DAI12-4(USB)GY >

Name Function Indicator color LED indicator

ON: Communication established

OFF: Communication unestablished

ON: Operation enabled

OFF: Operation disabled

ON: D/A conversion error

OFF: Normal D/A conversion

GREEN

RED

LINK status

RUN LED

STATUS LED

USB communication status

Operation status of the module

D/A conversion error indicator

LINK status LED

+5VDC input

Module ID

USB port

D/A conversion status LED

Analog output CHO to CH1

Analog output CH2 to CH3

2. Module Nomenclature

12

DAI12-4(USB)GY

3. Setup

DAI12-4(USB)GY

13

3.

Setup

Connection-Overall Diagram

This is connection-overall diagram. Please reference to this page for

actual connection.

Figure 3.1. Connection-Overall Diagram

Software Installation

(page 15)

Connecting to a PC

(page 17)

Connecting to an External Device

(page 21)

Connecting with

Expansion Accessories

(page 53)

Mounting on a DIN Rail

(page 31)

3. Setup

14

DAI12-4(USB)GY

Setting a Module ID

The host computer distinguishes and keeps track of the modules of

same model by assigning Module IDs to them. Factory settings “00”

can be used when only one module per model is connected to one

computer.

Each module should be assigned a unique Module ID in the range of

00 - 7Fh when several modules with the same model are being

connected.

There are two rotary switches, moreover, “x16” and “x1” represent

high bits and low bits of Module ID respectively.

Figure 3.2. Setting a Module ID

Module

ID(x16)

Module

ID (x1)

[0]

Module

ID(x16)

Module

ID (x1)

[1]

[2]

0

1

2

3

4

5

6

7

9

A

C

E

F

8

0

1

2

3

4

5

6

7

9

A

C

E

F

8

0

1

2

3

4

5

6

7

9

A

C

E

F

8

0

1

2

3

4

5

6

7

9

A

C

E

F

8

Module ID 00h

[Factory Settings]

Module ID 12h

3. Setup

DAI12-4(USB)GY

15

Setup Flow

The following shows the basic flow for installing USB module.

Software Installation

Connect with USB module, and install following software if USB

driver has been installed.

Illustration of Menu Screen

Points

- Please set up the supplied CD-ROM if it has not been set up. The

menu starts automatically.

- If the menu do not start, launch X: AUTORUN.EXE (X: CD-ROM

drive) from [Run…] in Start menu.

- The screen design may be different.

Connecting to a PC

-Installing USB driver

Setting Properties Using

Device Manager

-Setting device name

Software Installation

–API-USBP(WDM)

Development Environment

Page 15

Page 17

Page 19

Install the Development Environment such

as sample programs and online help, etc.

Refer to the description about CD-ROM.

Install the utility.

Install the C-LOGGER.

*Cannot be used for this product.

Refer to the user’s guide.

Page is loading ...

Contec DAI12-4(USB)GY Owner's manual

Contec DAI12-4(USB)GY Owner's manual

Related papers

Other documents