BARRON 3396993 Faux Panel Interior User manual

Type
User manual

BARRON 3396993 Faux Panel Interior is a versatile and stylish wall paneling solution that can transform any room in your home. These panels are easy to install and can be used to create a variety of looks, from rustic to modern. The panels are made from durable PVC and are designed to resist moisture and fading. They are also fire-resistant and meet all applicable building codes.

With BARRON 3396993 Faux Panel Interior, you can create a beautiful and functional space that will last for years to come. These panels are perfect for use in living rooms, bedrooms, kitchens, and bathrooms.

BARRON 3396993 Faux Panel Interior is a versatile and stylish wall paneling solution that can transform any room in your home. These panels are easy to install and can be used to create a variety of looks, from rustic to modern. The panels are made from durable PVC and are designed to resist moisture and fading. They are also fire-resistant and meet all applicable building codes.

With BARRON 3396993 Faux Panel Interior, you can create a beautiful and functional space that will last for years to come. These panels are perfect for use in living rooms, bedrooms, kitchens, and bathrooms.

Questions? Our Customer Experience & Design Support Team is here to assist you Mon-Fri: 9AM to 5PM EST at (800) 651-4223.
Quick Start Guide
Faux Panel Interior Installation Instructions
General Tools and Materials:
Panels Chalk Line /
Laser
NOTE: (1) tube of Loctite PL
Premium 3X adhesive is typically
needed for every (3) panels. (1) tube
of textured caulk is typically needed
for every (4) panels.
Wood Cutting
Saw with
Finish Blade
Tape
Measure
T-square
Caulk Gun
Water
Safety
Glasses
Level
Color
Coordinating
Textured
Caulk
Touchup Kit
WARNING:
Be sure to obey all safety rules and recommendations set forth by tool manufacturers.
Wear safety glasses during the entire installation process.
Be sure to follow all applicable building codes.
Always comply with clearances set forth by the manufacturer of stoves, replaces,
furnaces, and any other heat source.
Loctite® PL®
Premium® 3X
Construction
Adhesive
Clean Cloth
Wire BrushTack Cloth
Pencil
24 Hours Before
Starting
Acclimate all panels
by storing them at
in the installation
location (but away
from moisture and
direct sunlight or other
heat sources) for at
least 24 hours.
Panel Installation
1. Ensure that the installation surface is structurally sound and clean.
2. Orient the panels with the smooth, at lip (A) facing up. Start with the
bottom row and go up (Figure A).
3. Measure the wall and lay panels out. Make necessary cuts to start the row
and accommodate obstacles. Trim the rst panel and use the slot side to
start the run. The style of panel you selected will dictate if the installation
should go right to left (ngers on right) or left to right (ngers on left).
4. Apply construction adhesive to the back of the panel in vertical lines 4-6”
apart (Figure B). Adhere the panel to the wall using a slight twisting motion
to ensure good contact. Secure by inserting (1) screw per foot throughout
the panel (Figure C). Screws need to be long enough to penetrate the panel
and substrate.
5. Add a bead of caulk where the face meets the side lip of the panel to the
slot side of the installed panel. Apply a bead of adhesive to the lip of the
panel about 1 inch from the face (Figure D).
6. Install next panel ensuring that each panel interlocks and is straight (Figure E).
7. Once rst row is complete, proceed to the next row, taking care to stagger
the seams.
8. Touch-up by adding caulk to ll in screw holes and using the base coat,
paint and wash (in that order) from the touch-up kit.
Consult full, project-specic installation guide before starting:
www.barrondesigns.com/project-resources/installation-instructions/panels-installation/
Cotton
Swabs
Small Paint
Brush
Figure A
Figure B
Figure C
Figure D
Figure E
Finger Side
A
Slot Side
Deck
Screws
  • Page 1 1

BARRON 3396993 Faux Panel Interior User manual

Type
User manual

BARRON 3396993 Faux Panel Interior is a versatile and stylish wall paneling solution that can transform any room in your home. These panels are easy to install and can be used to create a variety of looks, from rustic to modern. The panels are made from durable PVC and are designed to resist moisture and fading. They are also fire-resistant and meet all applicable building codes.

With BARRON 3396993 Faux Panel Interior, you can create a beautiful and functional space that will last for years to come. These panels are perfect for use in living rooms, bedrooms, kitchens, and bathrooms.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI