2. Gleason Reel
  3. WA-CB Corner Brackets

Gleason Reel WA-CB Corner Brackets Assembly Instructions

  • Hello! I'm here to help you with information about the WA-CB Corner Bracket installation. I have reviewed the provided installation instructions, which detail how to use the corner brackets for extruded aluminum rails. The document explains how to position the vertical legs or columns and how to use the clamp bars. I am ready to answer any questions you may have about the installation process or the product itself.
  • What is the purpose of the corner brackets?
    How are the clamp bars used?
    What caution should be taken during installation?
USA PN 630036.a
The corner brackets for extruded aluminum rail are
highly versatile, designed to allow placement of a
vertical leg or column inside or outside the corner,
facing either left or right. Included are two clamp
bars for horizontal rails and one clamp bar for vertical
frame members. Clamp bars may be relocated or
reversed to accommodate the various configurations
shown below.
ASSEMBLY PROCEDURE:
Slide track nuts into rail and position as shown
in one of the illustrations below.
CAUTION:
Securely tighten all track nuts following installation.
HUBBELL
®
Workplace Solutions
INSTALLATION INSTRUCTIONS
CORNER BRACKET
CATALOG NUMBER WA-CB
CLAMP BARS FOR
HORIZONTAL RAILS
WA-CB CORNER
BRACKET
(inside view)
WA-CB CORNER
BRACKET
(outside view)
CLAMP BARS FOR
VERTICAL RAILS
Shown reversed for
“OUTSIDE”
leg installation
CLAMP BARS FOR
VERTICAL RAILS
LEG INSTALLED INSIDE,
FACING LEFT LEG INSTALLED INSIDE,
FACING RIGHT
LEG OR VERTICAL COLUMN
INSTALLED OUTSIDE, FACING LEFT
INSIDE VIEW
INSIDE VIEW
LEG OR VERTICAL COLUMN
INSTALLED OUTSIDE, FACING RIGHT
600 South Clark St.
Mayville, WI 53050-0026
Phone: 920-387-4120
/