Revell KIT 2896 Assembly Manual

Revell
Brand
Revell
Model
KIT 2896
Type
Assembly Manual
12
1
2
2
2
2
13
1
3
4
8
9
3232
11
3
4
32
(US Version only)
32
(US Version only)
38, 40, 42, 44, 46,
48, 50, 52, OR 53
37, 39, 41, 43, 45, 47, 49, 51, OR 54
(Do not dip in water, carefully cut decal out
and use white glue to attach)
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85289610200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2010. All rights reserved.
This paint guide is provided to complete this kit
as shown on the box.
Ce guide de peintures est fourni pour reproduire le modèle
réduit qui apparaît sur la boîte.
FERRARI 612 SCAGLIETTI
DECAL PLACEMENT
9
KIT 2896 85289610200
The new Ferrari was shown to the public
for the first time anywhere in the world at
the Detroit Motor Show in January 2004.
The presentation took place just 50 years
after the first Ferrari GT established itself
across the Atlantic. Like its predecessor
the 456M GT and GTA, the 612 Scaglietti
has a front engine located behind the
front axle, which accounts for the striking
length of the car. This position provides
an almost exact equilibrium in the axle
load distribution giving it almost perfect
handling. The Scaglietti takes just 4.4
seconds to accelerate from 0 to 100 and
15.5 seconds to 200 kph, with a top
speed of 321 kph. In the 612 Scaglietti
Ferrari have succeeded in combining high
performance with comfort and at the same
time more sports car than ever before.
Aluminum
Flat Grey
Satin Dark Grey
Satin Grey
Satin Black
Steel
Satin Red
Silver
Flat Brown
Satin Brown
Gloss Red
Gloss Blue
Transparent Red
Turn Signal Amber
Aluminium
Gris mat
Gris foncé satiné
Gris satiné
Noir satiné
Acier
Rouge satiné
Argent
Brun mat
Brun satiné
Rouge brillant
Bleu brillant
Rouge transparent
Feu clignotant de
direction ambre
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (H) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before cementing
in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with setting
solutions or solvents.
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (H) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente
peu concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son support
en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec les
solutions de fixage ou les solvants.
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER
* A COLLER
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
* DECAL
* DECAL COMANIE
* ASSEMBLY CAUTION
*ATTENTION D ASSEMBLEE
* OPTIONAL PARTS
* PIECES EN OPTION
* REPEAT PROCEDURE
* REPETEZ LE PROCEDE
`` ` ` ` `
Kit 2896 - Page 8
A B
C
D
E F
A B
C
D
E
F
ENGINE ASSEMBLY
1
FINAL ASSEMBLY
8
21
RT. WIPER
SATIN BLACK
22
LT. WIPER
SATIN BLACK
41
TRANSMISSION TOP
ALUMINUM
42
TRANSMISSION PLATE
ALUMINUM
61
PULLEY ASSEMBLY
SATIN BLACK
23
RT. SIDE VIEW MIRROR
GLOSS RED
25
LT. SIDE VIEW MIRROR
GLOSS RED
34
REAR BUMPER
GLOSS RED
63
PLENUM
SATIN RED
19
REAR WINDOW
CLEAR
7
RT. SIDE WINDOW
CLEAR
8
LT. SIDE WINDOW
CLEAR
33
TAILLIGHT
CLEAR
33
TAILLIGHT
CLEAR
62
ENGINE TOP
H35
REAR
LICENSE
PLATE
CHROME
H24
MIRROR
CHROME
H24
MIRROR
CHROME
47
LT. ENGINE HALF
ALUMINUM
48
RT. ENGINE HALF
ALUMINUM
49
ENGINE
BOTTOM
ALUMINUM
50
COVER
ALUMINUM
51
OIL FILTER
58
ENGINE TOP
ALUMINUM
53
LT. ENGINE MOUNT
ALUMINUM
54
LT. EXHAUST MANIFOLD
STEEL
(Repeat fort other side)
56
RT. EXHAUST MANIFOLD
STEEL
55
LT. EXHAUST
STEEL
(Repeat fort other side)
57
RT. EXHAUST
STEEL
60
LT. VALVE COVER
STEEL
(Repeat for other side)
59
RT. VALVE COVER
STEEL
52
RT. ENGINE MOUNT
ALUMINUM
37
RT EXHAUST PIPE
SILVER
38
LT EXHAUST PIPE
SILVER
36
EXHAUST PIPE SHIELD
ALUMINUM
40
TRANSMISSION BOTTOM
64
RADIATOR
SATIN BLACK
65
FAN
SATIN BLACK
SATIN DARK GREY
ALUMINUM
SATIN BLACK
ALUMINUM
SATIN RED
SATIN RED
ALUMINUM
SILVER
SATIN BLACK
ALUMINUM
FLAT GREY
SATIN BLACK
SATIN GREY
SATIN GREY
TRANSPARENT
RED
TRANSPARENT ORANGE
TRANSPARENT
RED
SILVER
SILVER
CLEAR RED
SILVER
SATIN BLACK
SATIN BLACK
SATIN BLACK
SATIN BLACK
FLAT BROWN
SATIN DARK GREY
SATIN DARK GREY
SATIN BLACK
SATIN BLACK
SILVER
(Repeat for other side)
TRANSPARENT ORANGE
OVER
SILVER
(Repeat for other side)
FLAT GREY
SATIN BLACK
SATIN BLACK
SATIN BLACK
7
DECAL
14
DECAL
10
DECAL
7
DECAL
14
DECAL
FLAT
GREY
FLAT
GREY
TRANSPARENT
RED
TRANSPARENT RED
TRANSPARENT ORANGE
DECAL
#34
DECAL
#33
Kit 2896 - Page 7Kit 2896 - Page 2
A
B C
D
FE
A B
C D
E F
SILVER
SATIN BLACK
DASH & BODY ASSEMBLY
7
REAR SUSPENSION & CHASSIS ASSEMBLY
2
43
DRIVE SHAFT
SATIN BLACK
32
HINGE RETAINER
(APPLY GLUE
IN SHADED
SECTION ONLY)
11
REAR VIEW
MIRROR
SATIN DARK GREY
39
CHASSIS
SATIN BLACK
17
DASHBOARD BOTTOM
SATIN BROWN
27
HOOD HINGE
GLOSS RED
44
RT. REAR AXLE
ALUMINUM
45
RT. REAR AXLE
ALUMINUM
66
REAR STRUT
SATIN BLACK
80
FRONT BOTTOM
PAN
SATIN BLACK
16
DASHBOARD TOP
SATIN DARK GREY
12
STEERING
COLUMN TOP
SATIN DARK GREY
13
STEERING
COLUMN BOTTOM
SATIN DARK GREY
14
STEERING WHEEL
SATIN DARK GREY
(SHADED AREA
ALUMINUM)
67
RT. REAR INNER FENDER
ALUMINUM
69
LT. REAR INNER FENDER
ALUMINUM
68
REAR A-ARM
ALUMINUM
79
COOLER
SATIN BLACK
78
SWAY BAR
SATIN BLACK
26
HOOD
GLOSS RED
19
REAR WINDOW
CLEAR
10
LT. HEADLIGHT
COVER
CLEAR
9
RT. HEADLIGHT
COVER
CLEAR
68
REAR A-ARM
ALUMINUM
66
REAR STRUT
SATIN BLACK
H6
GRILLE
CHROME
H102
PEDALS
CHROME
H20
ENGINE
COMPARTMENT
CHROME
H15
STEERING
LEVERS
CHROME
H2
RT. HEADLIGHT
REFLECTOR
CHROME
H5
LT. HEADLIGHT
REFLECTOR
CHROME
3
TURN
SIGNAL
CLEAR
4
HEADLIGHT
CLEAR
SATIN
BLACK
(SATIN BLACK)
SATIN DARK GREY
GLOSS BLUE
ALUMINUM
GLOSS RED
SATIN
BLACK
SATIN
BLACK
ALUMINUM
SATIN BLACK
SATIN
BLACK
FLAT GREY
SATIN
BLACK
ALUMINUM
ALUMINUM
ALUMINUM
ALUMINUM
SILVER
SILVER
DECALS
#24 #23 #22 #21#20
(US Version Only)
DECAL
#26
#19 #18 #30
#31
DECALS
SATIN
BLACK
DECAL
#25
DECAL
#29
DECAL
#28
DECAL
#6
DECAL
#15
DECAL
#16
COMPLETED
DASH
ASSEMBLY
DECAL
#35
4
HEADLIGHT
CLEAR
3
TURN
SIGNAL
CLEAR
COMPLETED
EXHAUST PIPE
ASSEMBLY
COMPLETED
ENGINE
ASSEMBLY
COMPLETED
TRANSMISSION
ASSEMBLY
COMPLETED
RADIATOR
ASSEMBLY
Kit 2896 - Page 3Kit 2896 - Page 6
DECAL
#27
2X
A
B
C
B
C
A
72
B
REAR CHASSIS ASSEMBLY
3
INTERIOR ASSEMBLY
6
WHEEL ASSEMBLY
5
FIRST
H30
RT. EXHAUST
TIPS
CHROME
H31
LT. EXHAUST TIPS
CHROME
H83
REAR WHEEL
INNER
CHROME
H84
REAR WHEEL
OUTER
CHROME
H86
FRONT
WHEEL
INNER
CHROME
H87
FRONT
WHEEL
OUTER
CHROME
H92
CONSOLE COVER
CHROME
70
RT. FRONT WHEEL WELL
SATIN BLACK
71
LT. FRONT WHEEL WELL
SATIN BLACK
72
FRONT STRUT
SATIN BLACK
SHADED AREA SILVER
(Repeat for other side
along with RT. FRONT WHEEL
WELL ASSEMBLY)
73
RT. FRONT
AXLE
SILVER
74
LT. FRONT AXLE
SILVER
82
REAR
ROLL PAN
SATIN BLACK
81
REAR
BOTTOM
PAN
FLAT GREY
89
REAR WHEEL WELLS
SATIN BLACK
90
INTERIOR
91
BRAKE LEVER
SATIN DARK GREY
93
LT. SEAT FRONT
SATIN BROWN
94
LT. SEAT BACK
SATIN BROWN
95
RT. SEAT FRONT
SATIN BROWN
96
LT. SEAT BACK
SATIN BROWN
97
LT. SEAT
CONTROL
PANEL
SATIN DARK
GREY
98
RT. SEAT
CONTROL
PANEL
SATIN DARK
GREY
99
LT. DOOR PANEL
COLOR
100
RT. DOOR PANEL
101
REAR HEADREST
SATIN BROWN
46
REAR DISC BRAKE
SILVER (SHADED AREA
SATIN BLACK)
75
FRONT DISC
BRAKE
SILVER (SHADED AREA
SATIN BLACK)
76
FRONT A-ARM
ALUMINUM
77
TIE ROD
28
RT. MUFFLER
ALUMINUM
29
LT. MUFFLER
ALUMINUM
ALUMINUM
FLAT GREY
SATIN BLACK
SATIN DARK GREY
SATIN DARK
GREY
SATIN
BROWN
FLAT BROWN
SATIN DARK GREY
FLAT GREY
SATIN BLACK
SATIN DARK
GREY
SATIN DARK
GREY
SATIN BROWN
SATIN
BROWN
FLAT BROWN
FRONT REAR
FLAT GREY
FRONT SUSPENSION ASSEMBLY
4
76
FRONT A-ARM
ALUMINUM
ALUMINUM
FLAT GREY
LT. FRONT
RT. FRONT
88
TIRE
DECAL
#5
85
TIRE
SATIN DARK
GREY
DECAL
#36
DECAL
#17
DECAL
#5
Kit 2896 - Page 5Kit 2896 - Page 4
2X
A
B
C
B
C
A
72
B
REAR CHASSIS ASSEMBLY
3
INTERIOR ASSEMBLY
6
WHEEL ASSEMBLY
5
FIRST
H30
RT. EXHAUST
TIPS
CHROME
H31
LT. EXHAUST TIPS
CHROME
H83
REAR WHEEL
INNER
CHROME
H84
REAR WHEEL
OUTER
CHROME
H86
FRONT
WHEEL
INNER
CHROME
H87
FRONT
WHEEL
OUTER
CHROME
H92
CONSOLE COVER
CHROME
70
RT. FRONT WHEEL WELL
SATIN BLACK
71
LT. FRONT WHEEL WELL
SATIN BLACK
72
FRONT STRUT
SATIN BLACK
SHADED AREA SILVER
(Repeat for other side
along with RT. FRONT WHEEL
WELL ASSEMBLY)
73
RT. FRONT
AXLE
SILVER
74
LT. FRONT AXLE
SILVER
82
REAR
ROLL PAN
SATIN BLACK
81
REAR
BOTTOM
PAN
FLAT GREY
89
REAR WHEEL WELLS
SATIN BLACK
90
INTERIOR
91
BRAKE LEVER
SATIN DARK GREY
93
LT. SEAT FRONT
SATIN BROWN
94
LT. SEAT BACK
SATIN BROWN
95
RT. SEAT FRONT
SATIN BROWN
96
LT. SEAT BACK
SATIN BROWN
97
LT. SEAT
CONTROL
PANEL
SATIN DARK
GREY
98
RT. SEAT
CONTROL
PANEL
SATIN DARK
GREY
99
LT. DOOR PANEL
COLOR
100
RT. DOOR PANEL
101
REAR HEADREST
SATIN BROWN
46
REAR DISC BRAKE
SILVER (SHADED AREA
SATIN BLACK)
75
FRONT DISC
BRAKE
SILVER (SHADED AREA
SATIN BLACK)
76
FRONT A-ARM
ALUMINUM
77
TIE ROD
28
RT. MUFFLER
ALUMINUM
29
LT. MUFFLER
ALUMINUM
ALUMINUM
FLAT GREY
SATIN BLACK
SATIN DARK GREY
SATIN DARK
GREY
SATIN
BROWN
FLAT BROWN
SATIN DARK GREY
FLAT GREY
SATIN BLACK
SATIN DARK
GREY
SATIN DARK
GREY
SATIN BROWN
SATIN
BROWN
FLAT BROWN
FRONT REAR
FLAT GREY
FRONT SUSPENSION ASSEMBLY
4
76
FRONT A-ARM
ALUMINUM
ALUMINUM
FLAT GREY
LT. FRONT
RT. FRONT
88
TIRE
DECAL
#5
85
TIRE
SATIN DARK
GREY
DECAL
#36
DECAL
#17
DECAL
#5
Kit 2896 - Page 5Kit 2896 - Page 4
A
B C
D
FE
A B
C D
E F
SILVER
SATIN BLACK
DASH & BODY ASSEMBLY
7
REAR SUSPENSION & CHASSIS ASSEMBLY
2
43
DRIVE SHAFT
SATIN BLACK
32
HINGE RETAINER
(APPLY GLUE
IN SHADED
SECTION ONLY)
11
REAR VIEW
MIRROR
SATIN DARK GREY
39
CHASSIS
SATIN BLACK
17
DASHBOARD BOTTOM
SATIN BROWN
27
HOOD HINGE
GLOSS RED
44
RT. REAR AXLE
ALUMINUM
45
RT. REAR AXLE
ALUMINUM
66
REAR STRUT
SATIN BLACK
80
FRONT BOTTOM
PAN
SATIN BLACK
16
DASHBOARD TOP
SATIN DARK GREY
12
STEERING
COLUMN TOP
SATIN DARK GREY
13
STEERING
COLUMN BOTTOM
SATIN DARK GREY
14
STEERING WHEEL
SATIN DARK GREY
(SHADED AREA
ALUMINUM)
67
RT. REAR INNER FENDER
ALUMINUM
69
LT. REAR INNER FENDER
ALUMINUM
68
REAR A-ARM
ALUMINUM
79
COOLER
SATIN BLACK
78
SWAY BAR
SATIN BLACK
26
HOOD
GLOSS RED
19
REAR WINDOW
CLEAR
10
LT. HEADLIGHT
COVER
CLEAR
9
RT. HEADLIGHT
COVER
CLEAR
68
REAR A-ARM
ALUMINUM
66
REAR STRUT
SATIN BLACK
H6
GRILLE
CHROME
H102
PEDALS
CHROME
H20
ENGINE
COMPARTMENT
CHROME
H15
STEERING
LEVERS
CHROME
H2
RT. HEADLIGHT
REFLECTOR
CHROME
H5
LT. HEADLIGHT
REFLECTOR
CHROME
3
TURN
SIGNAL
CLEAR
4
HEADLIGHT
CLEAR
SATIN
BLACK
(SATIN BLACK)
SATIN DARK GREY
GLOSS BLUE
ALUMINUM
GLOSS RED
SATIN
BLACK
SATIN
BLACK
ALUMINUM
SATIN BLACK
SATIN
BLACK
FLAT GREY
SATIN
BLACK
ALUMINUM
ALUMINUM
ALUMINUM
ALUMINUM
SILVER
SILVER
DECALS
#24 #23 #22 #21#20
(US Version Only)
DECAL
#26
#19 #18 #30
#31
DECALS
SATIN
BLACK
DECAL
#25
DECAL
#29
DECAL
#28
DECAL
#6
DECAL
#15
DECAL
#16
COMPLETED
DASH
ASSEMBLY
DECAL
#35
4
HEADLIGHT
CLEAR
3
TURN
SIGNAL
CLEAR
COMPLETED
EXHAUST PIPE
ASSEMBLY
COMPLETED
ENGINE
ASSEMBLY
COMPLETED
TRANSMISSION
ASSEMBLY
COMPLETED
RADIATOR
ASSEMBLY
Kit 2896 - Page 3Kit 2896 - Page 6
DECAL
#27
A B
C
D
E F
A B
C
D
E
F
ENGINE ASSEMBLY
1
FINAL ASSEMBLY
8
21
RT. WIPER
SATIN BLACK
22
LT. WIPER
SATIN BLACK
41
TRANSMISSION TOP
ALUMINUM
42
TRANSMISSION PLATE
ALUMINUM
61
PULLEY ASSEMBLY
SATIN BLACK
23
RT. SIDE VIEW MIRROR
GLOSS RED
25
LT. SIDE VIEW MIRROR
GLOSS RED
34
REAR BUMPER
GLOSS RED
63
PLENUM
SATIN RED
19
REAR WINDOW
CLEAR
7
RT. SIDE WINDOW
CLEAR
8
LT. SIDE WINDOW
CLEAR
33
TAILLIGHT
CLEAR
33
TAILLIGHT
CLEAR
62
ENGINE TOP
H35
REAR
LICENSE
PLATE
CHROME
H24
MIRROR
CHROME
H24
MIRROR
CHROME
47
LT. ENGINE HALF
ALUMINUM
48
RT. ENGINE HALF
ALUMINUM
49
ENGINE
BOTTOM
ALUMINUM
50
COVER
ALUMINUM
51
OIL FILTER
58
ENGINE TOP
ALUMINUM
53
LT. ENGINE MOUNT
ALUMINUM
54
LT. EXHAUST MANIFOLD
STEEL
(Repeat fort other side)
56
RT. EXHAUST MANIFOLD
STEEL
55
LT. EXHAUST
STEEL
(Repeat fort other side)
57
RT. EXHAUST
STEEL
60
LT. VALVE COVER
STEEL
(Repeat for other side)
59
RT. VALVE COVER
STEEL
52
RT. ENGINE MOUNT
ALUMINUM
37
RT EXHAUST PIPE
SILVER
38
LT EXHAUST PIPE
SILVER
36
EXHAUST PIPE SHIELD
ALUMINUM
40
TRANSMISSION BOTTOM
64
RADIATOR
SATIN BLACK
65
FAN
SATIN BLACK
SATIN DARK GREY
ALUMINUM
SATIN BLACK
ALUMINUM
SATIN RED
SATIN RED
ALUMINUM
SILVER
SATIN BLACK
ALUMINUM
FLAT GREY
SATIN BLACK
SATIN GREY
SATIN GREY
TRANSPARENT
RED
TRANSPARENT ORANGE
TRANSPARENT
RED
SILVER
SILVER
CLEAR RED
SILVER
SATIN BLACK
SATIN BLACK
SATIN BLACK
SATIN BLACK
FLAT BROWN
SATIN DARK GREY
SATIN DARK GREY
SATIN BLACK
SATIN BLACK
SILVER
(Repeat for other side)
TRANSPARENT ORANGE
OVER
SILVER
(Repeat for other side)
FLAT GREY
SATIN BLACK
SATIN BLACK
SATIN BLACK
7
DECAL
14
DECAL
10
DECAL
7
DECAL
14
DECAL
FLAT
GREY
FLAT
GREY
TRANSPARENT
RED
TRANSPARENT RED
TRANSPARENT ORANGE
DECAL
#34
DECAL
#33
Kit 2896 - Page 7Kit 2896 - Page 2
12
1
2
2
2
2
13
1
3
4
8
9
3232
11
3
4
32
(US Version only)
32
(US Version only)
38, 40, 42, 44, 46,
48, 50, 52, OR 53
37, 39, 41, 43, 45, 47, 49, 51, OR 54
(Do not dip in water, carefully cut decal out
and use white glue to attach)
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85289610200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2010. All rights reserved.
This paint guide is provided to complete this kit
as shown on the box.
Ce guide de peintures est fourni pour reproduire le modèle
réduit qui apparaît sur la boîte.
FERRARI 612 SCAGLIETTI
DECAL PLACEMENT
9
KIT 2896 85289610200
The new Ferrari was shown to the public
for the first time anywhere in the world at
the Detroit Motor Show in January 2004.
The presentation took place just 50 years
after the first Ferrari GT established itself
across the Atlantic. Like its predecessor
the 456M GT and GTA, the 612 Scaglietti
has a front engine located behind the
front axle, which accounts for the striking
length of the car. This position provides
an almost exact equilibrium in the axle
load distribution giving it almost perfect
handling. The Scaglietti takes just 4.4
seconds to accelerate from 0 to 100 and
15.5 seconds to 200 kph, with a top
speed of 321 kph. In the 612 Scaglietti
Ferrari have succeeded in combining high
performance with comfort and at the same
time more sports car than ever before.
Aluminum
Flat Grey
Satin Dark Grey
Satin Grey
Satin Black
Steel
Satin Red
Silver
Flat Brown
Satin Brown
Gloss Red
Gloss Blue
Transparent Red
Turn Signal Amber
Aluminium
Gris mat
Gris foncé satiné
Gris satiné
Noir satiné
Acier
Rouge satiné
Argent
Brun mat
Brun satiné
Rouge brillant
Bleu brillant
Rouge transparent
Feu clignotant de
direction ambre
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (H) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before cementing
in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with setting
solutions or solvents.
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (H) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente
peu concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son support
en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec les
solutions de fixage ou les solvants.
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER
* A COLLER
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
* DECAL
* DECAL COMANIE
* ASSEMBLY CAUTION
*ATTENTION D ASSEMBLEE
* OPTIONAL PARTS
* PIECES EN OPTION
* REPEAT PROCEDURE
* REPETEZ LE PROCEDE
`` ` ` ` `
Kit 2896 - Page 8
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Revell KIT 2896 Assembly Manual

Revell
Brand
Revell
Model
KIT 2896
Type
Assembly Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents