2. Baxton Studio
  3. BBT5454-Dark Grey/Walnut-Stool

Baxton Studio BBT5454-Dark Grey/Walnut-Stool, BBT5454-Greyish Beige/Walnut-Stool Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the BBT5454 stool. The document provides detailed steps and a parts list to help you assemble the stool correctly. It also includes important cautions about tightening bolts and the required tools for assembly. I'm ready to assist you with any questions you might have about the assembly process or the device itself.
  • What tools are needed for assembly?
    Should I fully tighten the nuts or bolts immediately?
    Is it okay to over-tighten the nuts or bolts?
HARDWARE LIST (BOX : 1)
ITEM DESCRIPTION QTY
1JCBC BOLT M6 x 60mm 8 PCS
2 M6 FLAT WASHER 8 PCS
3 M6 SPRING WASHER 8 PCS
4WOOD SCREW M4 x 38mm 4 PCS
5 M4 ALLEN KEY (BALL SHAPE) 1 PC
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Rubber Mallet (not provided).
ASSEMBLY INSTRUCTIONS
MODEL : BBT5454 STOOL 1 OF 2
STEP 1 STEP 2
B
C
5132
PART LIST
ITEM DESCRIPTION BOX QTY
A CHAIR 1 1 PC
B LEG FRAME 1 1 PC
C LEG 1 4 PCS
ASSEMBLY INSTRUCTIONS 2 OF 2
STEP 3 STEP 4
A
4
STEP 5
/