2. Fanmaster
  3. PACISD-PA
PACISD-PA

Fanmaster PACISD-PA User manual

  • Hello! I am an AI chatbot trained to assist you with the Fanmaster PACISD-PA User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What tools are required to assemble the Fanmaster PACISD-PA?
    How many people are recommended for assembly?
    Where can I find the accessories box?
    How do I attach the castors?
    How do I assemble the air outlet?
    How do I connect the controller cable and earth cables?
    How do I attach the louvre assembly?
PORTABLE EVAPORATIVE AIR COOLER - SINGLE DIRECTIONAL
D.I.Y assemble kit #PACISD-PA
FA NM A ST E R
cooling heating ventilation extraction
ASSEMBLY INSTRUCTIONS
WHAT’S INCLUDED
PART QTY IMAGE
Air outlet assembly
2 x side panels
1 x top cover panel
1 x underneath support
1 x louvre assembly
1
Body 1
Castors
(located inside body) 4
Screws/Accessories
(located inside body)
Control Panel +
Enclosure
(located inside body) 1
Remote Control
(located inside body) 1
Instruction Manual
(located inside body) 1
TOOLS REQUIRED
• Powered drill with Philips head bit
• Screwdriver (philips)
• Pliers
VIDEO INSTRUCTION
WATCH ME
PRODUCT INFORMATION
SCAN ME
ASSEMBLY INSTRUCTIONS
1st Stage - Unpack & Locate Accessories Box:
• Remove body from the carton
• Remove side panel (with yellow label) to access inside of body
• Locate box with castors, instruction manual, control panel, remote & accessories
RECOMMEND 2 PERSONS FOR ASSEMBLY
2nd Stage - Attachment of Castors
• Place down the carton or blanket on the floor
• Carefully lay the body on its side
• Attach 4 x castors with bolts & washers supplied
• Lock all 4 brake functions and lift unit into upright position
3rd Stage - Assembly & Attachment of Air Outlet
• Locate 2 x side panels, 1 x underneath support & 1 x top cover
• Assemble 2 x side panels, 1 x underneath support & 1 x top cover with screws provided
• Attach air outlet to body with screws provided
4th Stage - Cabling, Connection & Louvre Attachment:
• Locate cables - controller cable (black) and earth cables (green/yellow)
• Thread the controller cable (black) through hole on the air outlet head
• Connect controller cable (black) to control panel
• Secure control panel with enclosure to head of unit with screws provided
• Attach earth cable (green/yellow) to synchronous motor on lourve assembly
• Connect synchronous motor cable to controller cable
• Attach the lourve assembly to the air outlet head
• Secure excess cabling of controller (black) and earth cables (green/yellow) on the front metal
support pole in the body of unit with cable ties supplied.
• Replace side panel
• Ready to plug and play.
/