DATE: 11.06.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(/2''). Please read the installation manual for detailed information on
installing the product. www.fisherpaykel.com
INDICATES CABINETRY CARCASS DATUM
INDICATES MINIMUM CABINETRY CLEARANCES
0'' Double Self-clean Built-in Oven
Model no:
OB30DTEPX3 (refer page 2 for metric measurements)
Product Dimensions
a Overall height* of oven
B Overall width of oven
c Depth of oven front and control panel** (excludes handle and
dials)
d Depth of oven chassis (does not include oven front)
e Height from bottom datum to top of stainless fascia cap
f Height from bottom datum to bottom of stainless fascia cap
g Height from bottom datum to top of top door
H Height from bottom datum to centre of top handle
I Height from bottom datum to bottom of top door
J Height from bottom datum to top of bottom door
K Height from bottom datum to centre of bottom handle
L Height from bottom datum to top of vent
M Thickness of handle
N Height of chassis
O Depth of door (open) (measured from front of door)
P Overall width of chassis
Q Width of handle
R Depth of handle (measured from front of door)
* All height measurements included mounted feet
** Measured to front glass surface and excludes /2'' stainless cap
Minimum Clearances
Minimum inside height of cavity from bottom datum
Minimum inside width of cavity
Minimum inside depth of cavity from front datum
DATUM : BOTTOM OF CARCASS
DATUM : FRONT OF CARCASS
DATUM : FRONT OF CARCASS
P
29 29/2''
B
22 1/2''
D
A
FRONT VIEW
PLAN VIEW
PROFILE VIEW
O
C
C
D
N
O
LKJI
Q
48 1/2''
HGFE
M
M
R