DATE: 10.04.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(3/32''). Please read the installation manual for detailed information on
installing the product. www.fisherpaykel.com
INDICATES CABINETRY CARCASS DATUM
INDICATES MINIMUM CABINETRY CLEARANCES
DATUM : BOTTOM OF CARCASS
DATUM : FRONT OF CARCASS
DATUM : FRONT OF CARCASS
597
B
K
545
D
I
458
A
l
P
c
FRONT VIEW
PLAN VIEW
PROFILE VIEW
C
HGF
m
n
D
552
O
P
E
600mm Compact Oven
Model no:
OB60NC9DEX1
Product Dimensions
a Overall height* of compact oven
B Overall width of compact oven
c Depth of compact oven front and control panel**
d Depth of chassis measured from front datum
E Height from bottom datum to top of stainless cap
F Height from bottom datum to bottom of stainless cap
G Height from bottom datum to top of door
H Height from bottom datum to top of handle
I Height from bottom datum to bottom of handle
J Height from bottom datum to bottom of door
K Width of handle
L Depth of handle measured from front of door**
M Height from bottom datum to top of chassis
n Height from bottom datum to top of chassis at rear
O Width of chasis at rear
p Depth of door (open) (measured from front of door glass)**
* All height measurements included mounted feet
** Measured to front glass surface and excludes 2mm stainless cap
Minimum Clearances
Height of cavity from bottom datum
Minimum inside width of cavity
Minimum inside depth of cavity from front datum
j