Drill with precision by first using the 5mm
drill, and then the 10mm drill. Drill as deep
as the screws
are in length. Hammer the
plugs
into the drill holes.
Fasten the wall panel
to the frames and
measure the distance from the bottom of
the TV to the drill holes in the wall panel.
Secure the wall panel
to the wall. Use
the spirit level for accuracy. Lift the TV with
2 people and attach it to the wall panel. Pull
down the strings to lock the television in
place. Keep the strings out of the way by
tying a knot or taping them in place, for
example.
Place the spirit level (M-L)
on the wall
panel
and use it to draw 4 drill holes at
the level of the X you drew in step 3.
Decide where to place your TV on the wall
and mark where the bottom of your tv
should be. Move your pencil up by the same
distance you just measured and draw an X.
Need help?
Call 010 798 89 99 or visit
Coolblue.nl/en/
customer-service
Prior to drilling:
Use the pipe locator to check
if there aren’t any pipes or
cables behind the wall.
Place your TV on a blanket. Look in bags
M-A through M-H
for the screw that fits
your TV. You only need 1 set of screws.
Secure the frames
as pictured. Extra
space? Place washer (M-I)
or spacer
(M-J of M-K)
in between.
Suitable surface area:
Solid brick
Solid concrete
Drywall with wooden
pillars behind it
BBFWM3250
Coolblue isn’t liable for any damage, accidents,
or arguments with boy/girlfriends as a result of
incorrect installation. Not sure if you can do this
on your own? Ask a skilled installation expert
for advice.
INSTALL THE FRAMES
1. MEASURE
2. DECIDE ON PLACEMENT
3.
DRILL
5. HANG THE TV
6.
MARK DOWN THE WALL
4.
CHECKLIST.
You’re 50% there.
Don’t cut off the strings:
You’ll need them if you want
to take down the TV from the
wall.
Write down the size: cm