Sanyo FW32D25T Owner's manual

Category
LCD TVs
Type
Owner's manual

This manual is also suitable for

The Sanyo FW32D25T is a versatile and feature-rich TV that will enhance your viewing experience. With its impressive array of connectivity options, including HDMI, USB, and optical audio output, you can easily connect various devices such as gaming consoles, Blu-ray players, and sound systems to enjoy a wide range of multimedia content. The built-in digital audio receiver control (ARC) enables seamless audio output to compatible sound devices via HDMI, eliminating the need for additional cables.

The Sanyo FW32D25T is a versatile and feature-rich TV that will enhance your viewing experience. With its impressive array of connectivity options, including HDMI, USB, and optical audio output, you can easily connect various devices such as gaming consoles, Blu-ray players, and sound systems to enjoy a wide range of multimedia content. The built-in digital audio receiver control (ARC) enables seamless audio output to compatible sound devices via HDMI, eliminating the need for additional cables.

(LED BACKLIGHT)
HDTV
FW32D25T
FW42D25T
FW65D25T
Owner's Manual
LCD TV
Manuel du Propriétaire
Manual del Propietario
ES
FR
1-800-877-5032
1-800-877-5032
sanyo-av.com
To obtain a more detail Electronic Copy of this
Manual or much further contents, go to
Need help?Please Call Toll Free or visit our Web Site above:
1
The mains plug is used as disconnect device, the disconnect device shall remain readily
operable.
WARNING
apparatus.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Need help? sanyo-av.com 1-800-877-5032
2
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16
Need help? sanyo-av.com 1-800-877-5032
3
Note to CATV system installer:
This reminder is provided to call CATV system installer’s attention to Article 820-40 of the NEC that
provides guideline for proper grounding and , in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as practical.”
17.
18.
19.
20.
An outside antenna system should not be located in the vicinity of overhead power lines or other
electrical light or power circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Wall or Ceiling Mounting – The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
Apparatus shall not be exposed to dripping or splashing, and no object filled with liquids, such as
vases, shall be placed on it.
When the MAINS plug is used as the disconnect device, the disconnect device shall remain
readily operable.
Need help? sanyo-av.com 1-800-877-5032
4
Table of Contents
Chapter 1: Connections and Setup
Chapter 2: Menu Operation
Chapter 3:Other Information
5
5
6
7
8
8
10
12
13
13
13
14
16
1
2
16
16
17
18
19
20
21
22
23
23
23
24
25
27
27
27
28
Before Initial Setup ..............................................................................................................................
Check Supplied Parts...........................................................................................................................
Attaching Your TV to the Stand Base..................................................................................................
Mounting Your TV to the Wall .............................................................................................................
Buttons on the TV ................................................................................................................................
Explanation of jacks on TV ..................................................................................................................
Choose Your Connections ....................................................................................................................
Remote Control Functions ..................................................................................................................
Obtain the Signal ................................................................................................................................
Switching On .......................................................................................................................................
Switching Off .......................................................................................................................................
Setup Wizard .......................................................................................................................................
Input List ..............................................................................................................................................
Important Information ...........................................................................................................................
Important Safety Insructions ................................................................................................................
Menu .....................................................................................................................................................
Picture ..................................................................................................................................................
Sound ...................................................................................................................................................
Channel ................................................................................................................................................
Setup ....................................................................................................................................................
Lock .....................................................................................................................................................
Help ......................................................................................................................................................
PC ........................................................................................................................................................
VIDEO/HDMI ......................................................................................................................................
USB ......................................................................................................................................................
Photo ....................................................................................................................................................
Frequently Asked Questions (FAQS) ....................................................................................................
Troubleshooting ....................................................................................................................................
Care and Cleaning ...............................................................................................................................
Television Specifications .......................................................................................................................
.........................................................................................................................................
Limited Warranty ...................................................................................................................................
Specification
Need help? sanyo-av.com 1-800-877-5032
5
Chapter 1
Owner's Manual
QUICK‘N EASY Setup Guide
Remote Control
Parts for Stand Base
Need help? sanyo-av.com 1-800-877-5032
6
Note:The picture of stand installation is just for the reference, please base on the material object for
the real sample.
For FW65D25T please see B -1.
FW65D25T
FW32D25T
FW42D25T
Base
base unassembled table
stand
Note:Stand base screws
are located in the
literature package.
Need help? sanyo-av.com 1-800-877-5032
B - 1
Model Mounting screws measurements
M4 (4mm) Diameter, Length-12mm (maximum) x 4
ST4 (4mm) Diameter, Length-20mm (maximum) x 4
M5 (5mm) Diameter, Length-12mm (maximum) x 4
ST4 (4mm) Diameter, Length-20mm (maximum) x 4
M5 (5mm) Diameter, Length-20mm (maximum) x 4
7
Recommendation to buy screws:
FW32D25T
FW42D25T
FW65D25T
M4
M6
M6
1
2
4
2
2
4
FW32D25T M4X10.max(10mm)
FW42D25T M6X20.max(20mm)
FW65D25T M6X15.max(15mm)
The VESA number is the horizontal and vertical measurement of the mounting holes. For example,
400x200 refers to the fact that the mounting measurements are 400mm horizontally and 200mm vertically.
Need help? sanyo-av.com 1-800-877-5032
1
2
3
4
5
6
7
8
(Please base on the material object for the real sample.)
1
2
3
4
55
6
7
ENTER
Buttons on the TV
Take a certain model for an example:
Need help? sanyo-av.com 1-800-877-5032
9
ANTENNA/CABLE IN this socket can be used to connect the outside aerial
(including the analog signal and the digital signal)
HDMI 2 (High-Definition Multimedia Interface)
Provides an uncompressed digital connection that carries both video and
audio data by way of an integrated mini-plug cable.
3
Device
Digital
(For DVI input, it's audio input is shared with PC audio input)
Note: For the audio receiver control ARC, firstly you must have a device which supports
HDMI ARC, then connect it to the HDMI1 port. When the "ARC/CEC Setting" is enabled on
your TV, the TV set's speakers will mute automatically and the audio will be outputted on
your ARC sound device system.
Visual Interface (DVI), the jack on the side of your TV is also compatible with DVI
devices.
USB Allows you to connect a compatible mass storage device for the display of JPEG
pictures on the TV.
OPTICAL OUTPUTIt is possible to output audio through the digital audio terminal.
AUDIO OUTPUT the socket provides composite audio connection.
support amplified high power audio equipment. Please adjust the volume directly on
the external audio equipment. Please do not connect headphones directly to the TV.
The TV can
Need help? sanyo-av.com 1-800-877-5032
10
Compatibility
WXGA
480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz
, 1080p/60Hz
Need help? sanyo-av.com 1-800-877-5032
11
3
3
List
Video
VIDEO INPUT
INPUT
Need help? sanyo-av.com 1-800-877-5032
12
Press to
select the desired option
open the Input list, then press / to
.
/OK
RECALL
press the RECALL button return to the previously
viewed channel.
CC
the menu.
Playing photos in the USB menu.
Need help? sanyo-av.com 1-800-877-5032
Displays the Audio portion of programming as text
superimposed over the video.
USB
RESET AUDIO
SLEEP
MC42FN00
INFO
TV
FAVORITE
VOL
CH
PICTURE
EXIT
MENU
CC
RECALL
SUB CH
INPUT
POWER
SHAPE
PIX
MUTE
ENTER
OK
audio mode.
Install two (2) "AAA" batteries (not included) in the remote control.
13
ANTENNA/
CABLE IN
Connect the outside aerial or cable network to the
ANTENNA/CABLE IN on the back of the TV set to
receive off-air channels or cable channels.
The first step in connecting your TV is obtaining the signal. The back panel of your TV allows you to receive
analog and/or digital channels by using the ANTENNA/CABLE IN.
Need help? sanyo-av.com 1-800-877-5032
14
Need help? sanyo-av.com 1-800-877-5032
Connect an RF cable to the TV's ANTENNA/CABLE
IN terminal.
Select TV Location
1. Press / button on the remote control to select
Home Mode or Store Mode.
2. Press ENTER button to go.
1. Choose "Quick setup" or "Step by step" to setup
your new television.
2. Press ENTER button to go.
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Please select proper location for your TV.
Display will be adjusted for best result.
Home mode qualifies
for ENERGY STAR.
Store mode is for the
retail display setup
Home
Store
Home mode is for saving energy
and reducing power consumption.
Previous
Regresa
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Previous
Choose"Quick setup"or"Step by step"
to set up your new television.
Quick setup
(Advanced users)
Setp by setp
(Recommended)
Previous
Air
Search Start
Cable
Search Start
Skip
Please connect all inputs
to the terminals.
Make sure all of your
equipments switched on.
Use ARROW keys to highlight your choice and then press ENTER/OK key.
If you choose Please connect all
equipment to the TV's inputs and switch them on.
Then press ◄/► button to choose between an Air or
Cable search.
"Quick setup",
(Quick setup chosen)
Choose Initial Setup method
Setup Wizard
Analog channels:0 Digital channels:0
Channel search will be complete when blue progress bar reaches 100%
(PLEASE DO NOT INTERRUPT THE CHANNEL SEARCH,IT MAY TAKE A WHILE)
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Analog channels: 0 Digital channels: 0
Input search result:
Video
HDMI1
HDMI2
HDMI3
Finish
Repeat
Channel search result:
Successfully Completed
Air
Search channels from an indoor or outdoor antenna.
Press the Finish button to finalize the Initial Setup and
enjoy watching TV.
NOTE: If you need to do the process again, please
choose Repeat.
Cable
Search channels from the cable provider.
Successfully Completed
Choose Antenna Information to get a high definition
picture, then press ◄/► button to choose between
an Air or Cable search.
If "Step by step" is chosen, options will be more detailed.
Press Continue button to advance.
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Previous
Choose"Quick setup"or"Step by step"
to set up your new television.
Quick setup
(Advanced users)
Setp by setp
(Recommended)
(Setp by setp chosen)
Looking for a high definition picture?
Please take a moment to review the required connections.
Antenna Information
Previous
Air
Search Start
Cable
Search Start
Skip
Use ARROW keys to highlight your choice and then press ENTER/OK key.
15
Previous Continue
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Connection check phase: Video
please turn on the power of apparatus and check connection.
DVD/Blu-ray
GAME
Y
(VIDEO)
Pb
Pr
L
R
Composite Component
Video
HDMI 1
HDMI 2
HDMI 3
Please choose a connection method.
Previous Continue
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Connection check phase: Video
please turn on the power of apparatus and check connection.
DVD/Blu-ray
GAME
Y
(VIDEO)
Pb
Pr
L
R
Composite Component
Video
HDMI 1
HDMI 2
HDMI 3
Neither type of connection could be confirmed.
Previous
Continue
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Connection check phase: HDMI
please turn on the power of apparatus and check connection.
DVD/Blu-ray
GAME
Video
HDMI 1
HDMI 2
HDMI 3
At least one connection cannot be checked.
Previous
Continue
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Connection check phase: HDMI
please turn on the power of apparatus and check connection.
DVD/Blu-ray
GAME
Video
HDMI 1
HDMI 2
HDMI 3
Connection was successful.
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Analog channels: 0 Digital channels: 0
Input search result:
Video
HDMI1
HDMI2
HDMI3
Next
Repeat
Channel search result:
Successfully Completed
Press
Press Next button to check connection in detail.
Repeat button to do the process again.
Press Continue button to go next.
If any connection is found, then you can see "Connection
was successful." with blue color.
Need help? sanyo-av.com 1-800-877-5032
Analog channels: 0 Digital channels: 0
Input search result:
Video
HDMI1
HDMI2
HDMI3
Finish
Repeat
Channel search result:
Successfully Completed
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Previous Continue
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Connection check phase: HDMI
please turn on the power of apparatus and check connection.
DVD/Blu-ray
GAME
Video
HDMI 1
HDMI 2
HDMI 3
At least one connection cannot be checked.
Press the Finish button to finalize the Initial Setup and
enjoy watching TV.
NOTE: If you need to do the process again, please
choose Repeat.
Connections that are found will be highlighted in blue
color.
Successfully Completed
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.
Environmental Protection Agency(EPA).
ENERGY STAR is a joint program of the U.S.
Environmental Protection Agency and the
U.S.Department of Energy helping us all
save mone
y and protect the environment
through energy efficient products and
practices.
®
®
Please Select Language
English
French
Spanish
Use ARROW keys to highlight your choice and then press ENTER/OK key.
16
Input List
Press INPUT button to select among TV/VIDEO
/HDMI 1/HDMI 2/HDMI 3/PC/USB
Menu
1. Press MENU to display the main menu or return to
the previous menu or close the main menu.
2. Press / to highlight the desired menu icon, and
press to .enter
Menu Operation
Picture
1. Press MENU to enter the main menu, Press /
button to select.
2. Press to enter. (Press MENU again to exit or
back to parent menu.)
Move
Select
MENU
Return
Picture Mode
Adjust picture mode to change picture appearance.
Press / button to select(Power Saving/Standard /
Vivid / Mild / Manual).
Standard Produces a highly defined image in a
normally lit room.
Vivid Produces a highly defined image in a
brightly lit room
Mild Produces a highly defined image in a
soft lit room.
Manual Select to customize picture settings.
Power Saving Select to power saving mode settings.
Note: "Power Saving"make this product qualify for
ENERGY STAR, if you select some other options,the
power consumption may change.
Picture
Sound
Sound
Setup
Setup
Lock
LockChannel
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Color Temperature
Backlight
Detailed Setting
Power Saving
50
50
50
Normal
50
50
90
Picture
Chapter 2
Help
Channel
Help
3.While Picture Mode is "manual", Press / button
to select among Picture Mode/Brightness/Contrast/
Color / Tint / Sharpness / Color Temperature /
Backlight/Detailed Settings.
4.Press button to enter.
5.Press / button to adjust.
6.Press MENU to exit it.
Brightness
Adjust darkness of black sections in the picture.
Press / button to adjust.
Items below are active while Picture mode
set to Manual. otherwise, they are gray.
Menu OperationMenu Operation
Need help? sanyo-av.com 1-800-877-5032
A menu screen asks you to set the location for TV.
ChoosingHome Mode” for the TV assigns the
optimal picture settings for most home
environments.
Use ARROW keys to highlight your choice and then press ENTER/OK key.
Please select proper location for you TV.
Display will be adjusted for best result.
Store mode is for the
retail display setup
Home
Store
Home mode is for saving energy
and reducing power consumption.
Previous
Regresa
A menu screen asks you to select language among
English, French and Spanish.
Choosing
Store Mode,which is not
ENERGY STAR compliant, sets the unit up
with predefined settings for retail displays.
Home mode qualifies
for ENERGY STAR.
ENERGY STAR qualification. Use /to
select the desired location setting(
Home
Mode or “Store Mode); then press ENTER
/OK to continue to the next screen.
In this setting, the power consumption may
exceed the requirements of the
Tint
Adjust the hue (Red,Green,Blue) of the picture.
Press button to adjust. /
Sharpness
Object edges are enhanced for picture detail.
Press button to adjust. /
Color Temperature
Change the overall color cast of the picture.
Normal
Warm
Cool
Produces a vivid image.
Produces a red-hued image.
Produces a gentle blue-hued image.
Backlight
Detailed Setting
Adjust the backlight brightness
Press button to adjust. /
Press button to enter.
Menu OperationMenu Operation
Sound
1.Press MENU to enter the main menu, Press /
button to select.
2.Press to enter. (Press
MENU again to exit or back to
parent menu.)
3.While Sound mode is "manual", Press / button to
select among Sound Mode / Bass / Treble / Balance /
MTS / Audio Language / Digital Audio Output / Surround
Sound / ARC/CEC Setting / Auto Volume Control.
4.Press / button to adjust.
5.Press MENU again or back to parent menu.
Surround sound
Auto Volume Control
Set the auto volume control.
Press / button to select (On / Off).
Press / button to select (On / Off).
Color
Adjust the color intensity of the picture.
Press button to adjust. /
Contrast
Adjust the white level of the picture.
Press / button to adjust.
17
Pix Shape
A
In PC mode, only "Full 100%" and "Point to Point" can
be selected.
djust how the picture fills the screen.
Wide
Zoom
Automatically Aspect Ratio Normal adjust
based on TV size and TV program.
Use to watch wide screen(16:9)
content.
Expands image to fill screen. Top and
button maybe cut off.
Noise Reduction
Set options to reduce video noise.
Off
Select to turn off video noise detection.
Low Detect and reduce low video noise.
Medium Detect and reduce moder
Off Turn off the digital audio system.
ate video
High Detect and reduce enhanced video
noise.
noise.
Move
Select
MENU
Return
Setup LockPicture
Picture
Sound
Sound Mode
Bass
Treble
Audio Language
ARC/CEC Setting
Surround Sound
Standard
50
50
0
English
Off
RAW
Off
Balance
MTS
Stereo
MTS
Sound Mode
Configures the multi-track sound.
Choose a predetermined sound mode or the Manual option
with features such as: Bass/ Treble/ Balance.
It is only available in ATV.
Press button to select (Stereo/SAP/Mono). /
Mono Sets the sound to mono.
Stereo Sets the sound to stereo when stereo
is not available, the sound is
automatically switched to mono.
SAP Sets the sound to the second audio
program.
Audio Language
Select the language supported by the chosen digital
channel. It is available Only in DTV.
Press button to select (English / / ). / French Spanish
Help
Channel
Auto Volume Control
Off
ARC/CEC Setting
Motion Sync
Press / button to select (Off/ Low/ Medium/ High)
(Only available for model: FW65D25T )
Need help? sanyo-av.com 1-800-877-5032
Channel
1.Press ENU to enter the main menu, Press M /
button to select.
2.Press to enter. ( ENU again to exit or
back to parent menu.)
MPress
3.If current source is TV,Press / button to select
among Air/Cable / Auto Scan/Favorite / Channel List/
Show/Hide / Channel Number / Channel Label.
4.Press button to adjust. /
5.Press ENU again or back to parent menu. M
Air/Cable
Select signal type.
Press button to select (Air/Cable). /
Auto Scan
Automatically search for channels.
Press / button to enter. ENTER
Are you sure to Auto
Scan?
No
Yes
Analog
Digital
RF CH
Total Found
1
--
4
1
:
:
:
:
Favorite
Add channels to create a favorite list.
Press ENTER/ button to enter.
Press ENTER/ button to enter.
Channel List
Display list for channels.
Show/Hide
Show or hide the channels in your program list.
Press / button to enter.ENTER
Press / button to enter.ENTER
Channel Number
Show the channel number.
Press button to adjust. /
Channel Label
Create labels for channels, up to 7 characters.
18
Move
Select
Select
Move
MENU
MENU
Return
Return
Sound Setup Lock
Picture
Picture
Channel
Favorite
Channel List
Show/Hide
Channel Number
Channel Label
Auto Scan
Air/Cable
Air
Channel
Channel
Channel Label
Channel Label
3-0
3-0
4-0
4-0
5-0
5-0
6-0
6-0
7-0
7-0
Prev
Prev
1/ 1
1/ 1
Next
Next
Press ok’change
Press‘ok’change
Move
Move
Return
Return
MENU
MENU
Hide
Menu Operation
Help
Sound Setup Lock
Picture
Picture
Channel
Help
Sound Setup Lock
Picture
Picture
Channel
Help
Sound Setup Lock
Picture
Picture
Channel
Help
Need help? sanyo-av.com 1-800-877-5032
3.Press / button to select among Menu Language /
Closed Caption /Over Scan/Input Label /
Other settings /Restore Default /Setup Wizard /
Sleep Timer.
4.Press button to adjust. /
5. ENU again or back to parent menu. Press M
Menu language
Press button to select language (English / /
Français / Español.)
Closed Caption
Adjust Closed Captioning settings. Only available
under TV and AV source.
Press / button to enter. ENTER
CC Mode
Turn Closed Captioning on/off.
Press button to select (CC Off / CC On / CC /
On Mute).
Analog CC
Set Closed Captioning for standard(analog) program.
Press button to select (CC1 / CC2 / CC3 / /
CC4 / Text1 / Text2 / Text3 / Text4).
Digital CC
Set Closed Captioning for digital program.
Press button to select (Service1 / Service2 / /
Service3 / Service4 / Service5 / Service6 / Off).
Setup
1.Press MENU to enter the main menu, Press /
Button to select.
2.Press to enter. (Press MENU again to exit or
back to parent menu.)
19
Move
Select
MENU
Return
LockChannelPicture
Picture
Sound
English
Off
Setup
Menu Language
Closed Caption
Over Scan
Other Settings
Input Label
Restore Default
Setup Wizard
Adjust the digital Closed Captioning setting.
Mode
Set the look of digital Closed Captioning.
Press button to select (Default / Custom). /
Font Style
Select from 8 font styles.
Press button to select (Default / Font 0 / Font 1 / /
Font 2 / Font 3 / Font 4 / Font 5 / Font 6 / Font 7).
Option
Font Size
Adjust the size of the digital Closed Captioning font.
Press button to select (Default /Normal / Small /Large).
Press / button to enter.ENTER
Menu Operation
FG Opacity
Adjust the transparency of the digital Closed Captioning
font.
Press button to select (Default / Solid / Flashing //
Translucent / ).Transparent
BG Opacity
Adjust the digital Closed Captioning background
transparency.
Press button to select (Default / Solid / /
Flashing / Translucent / ). Transparent
*Note: All the options can be adjusted while the
mode is Custom.
FG Color
Adjust the color of the digital Closed Captioning font.
Press button to select (Default/ White /Red /
Green / Blue / Yellow / Magenta / Cyan).
/
BG Color
Adjust the digital Closed Captioning background color.
Press button to select (Default/ Black / Red /
Green /Blue/ Yellow / Magenta / Cyan).
/
Input Label
Over Scan
Press / button to enter. ENTER
Press button to select (Off / On). /
The setting of Over Scan on/off
Help
Sleep Timer
Off
Need help? sanyo-av.com 1-800-877-5032
1 / 1

Sanyo FW32D25T Owner's manual

Category
LCD TVs
Type
Owner's manual
This manual is also suitable for

The Sanyo FW32D25T is a versatile and feature-rich TV that will enhance your viewing experience. With its impressive array of connectivity options, including HDMI, USB, and optical audio output, you can easily connect various devices such as gaming consoles, Blu-ray players, and sound systems to enjoy a wide range of multimedia content. The built-in digital audio receiver control (ARC) enables seamless audio output to compatible sound devices via HDMI, eliminating the need for additional cables.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document