http://www.sanyo-av.com/
http://www.sanyo-av.com/
i
n
f
o
For more info,
please contact 1-866-212-0436
or visit : sanyo-av.com
Manual
Please read the supplied Owner's Manual
for the detailed instructions.
* 2 V M N 0 0 1 9 4 *
VIDEO IN
AUDIO IN
L
R
L
R
IN --- AUDIO --- OUT
IN --- VIDEO --- OUT
ANT. INANT.OUT
LR
VIDEO OUTAUDIO OUT
ANT. IN
or
Writing to Disc 90%
Initial Setup
Select the language for Setup display.
OSD Language
English
Français
Español
Clock Setting
JAN / 29 / 2015 ( THU )
12 : 00 AM
Clock Setting
- - - / - - / - - - - ( - - -
)
- - : - - - -
Printed in China
E9P8GUH
2VMN00194 ★★★★★
Connecting to an
External Tuner
1.
Select
2.
Connect
3.
Prepare
4.
Record
(DVD)
5.
After all the connections are complete,
connect the AC power cord.
1
2
4
5
3
Insert two Size AA (1.5V).
2
Press [
y
] to turn On the unit.
3
Turn On your TV.
4
5
Prepare
4.
6
Use [K/L] to select your desired
language, then press [OK].
1
Press [DVD] first.
Align the disc to
the disc tray guide.
5.
e.g.) DVD-R
Record(DVD)
7
Use [K/L] to select calendar or time,
then press [OK].
1.
Connecting to an External Tuner
DVD Recorder/VCR LINE-IN RECORDING (No Tuner)
Press [INPUT SELECT] to select the
appropriate external input position
(L1/L2) to which your external tuner is
connected.
Then select the desired channel to
record on the external tuner.
This Recorder only record on DVD-RW/-R,
cannot record on DVD+RW/+R.
SANYO is a registered trademark of SANYO Electric Co., Ltd. and is used by Funai Electric Co., Ltd. and Funai Corporation, Inc. under license
from SANYO Electric Co., Ltd.
Any liability related to SANYO products, including design and quality, is the sole responsibility of Funai Electric Co., Ltd. and Funai
Corporation, Inc.
Please contact Funai Corporation, Inc. for any questions or claims related to SANYO products: 1 866 212 0436 sanyo-av.com
Press the button on the TV’s remote
control that accesses the external input
channel repeatedly until you see "Initial
Setup" menu. (Please refer to your TV’s
owner's manual.)
If the TV is connected by an HDMI cable,
it may take a while for the "Initial Setup"
menu to come up.
8
Use [0/ / 1] to select an item to set, and
use [K/L] to select the contents to suit
your preference, then press [OK] when
you finish setting all the contents.
Your setting will be activated.
The clock starts counting when you press
[OK].
Insert a recordable disc (refer to page
24 in the Owner's Manual on how to
insert a disc).
Press [REC MODE] repeatedly to
select a recording mode.
Press [REC] to start recording.
Press [C] to Stop recording.
The title list will appear automatically after
writing to a disc is completed.
• Press [C] to exit the title list.
You will need to finalize DVD-RW or DVD-R
to play them back on other DVD players.
Refer to page 42 in the Owner's Manual
on how to finalize a disc.
rear of this unit
external tuner
Audio cable
Video cable
RF coaxial cable
Video cable
Audio cable
satellite
dish
cable TV
company
FWZV475F
Quick
Start
http://www.sanyo-av.com/
Better
Good
Best
AUDIO IN
R
L
VIDEO IN
L
R
L
R
IN --- AUDIO --- OUT
IN --- VIDEO --- OUT
AUDIO IN
VIDEO IN
R
L
Standard
Definition
TV
COMPONENT
VIDEO IN
Y
PB/CB
PR/CR
AUDIO IN
R
L
Standard
Definition
TV
HDMI IN
High
Definition
TV
DVD / VCR
Y
P
B
/CB
PR
/CR
COMPONENT
VIDEO OUT
AUDIO
OUT
L
R
COMPONENT
VIDEO IN
Y
PB/CB
PR/CR
AUDIO IN
R
L
HDMI IN
HDMI OUT
i
n
f
o
Manual
Component Video Cable and Audio Cable
Your TV
HDMI cable
For more info,
please contact 1-866-212-0436 or visit : sanyo-av.com
3.
HDMI cable sends both audio and video digital signals.
(No additional audio connection is required.)
Refer to “Connecting to a TV with an S-Video Input Jack” on page 17 in the
Owner’s Manual for the connection using an S-video cable.
HDMI Cable
Connect
Your TV
Your TV
Your TV
Your TV
Your TV
Please read the supplied Owner's Manual for the detailed
instructions.
Audio
+
HDMI cable
Component video cable
Audio cable
Audio cable
Video cable
Do not tilt the connector when inserting
it into the HDMI jack, and make sure the
shapes of the jack and the connector are
matched.
HDMI cable not included.
High Speed HDMI Cable (also known as HDMI category 2 cable) is
recommended for the better compatibility.
Cables used in this connection are as follows:
• Audio cable (L/R) x 1 (Included )
• Component video cable x 1 (Cable not included.)
Cables used in this connection are as follows:
• Audio cable (L/R) x1 (Included)
• Video cable x1(Included)
Video
Audio
Video
+
Audio
Video
Video Cable and Audio Cable
Audio cable
Component
video cable
Video cable
Audio cable
Select
2.
Progressive-compatible (1080p)
Supports only 480i resolution.
Progressive-compatible(480p)
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sanyo FW32D08F Start Manual
-
-
-
-
-
Sanyo FW32D06F Quick start guide
-
-
Sanyo FW40D36F Owner's manual
-
-
Other documents
-
Funai DV220FX5 Owner's manual
-
Magnavox ZV427MG9 A Owner's manual
-
Funai ZV427FX4 Owner's manual
-
Emerson zv427em5 Owner's manual
-
-
-
-
-
-