Sanyo FW32D25T Owner's manual

(LED BACKLIGHT)

HDTV

FW32D25T

FW42D25T

FW65D25T

Owner's Manual

LCD TV

Manuel du Propriétaire

Manual del Propietario

ES

FR

1-800-877-5032

sanyo-av.com

To obtain a more detail Electronic Copy of this

Manual or much further contents, go to

Need help?Please Call Toll Free or visit our Web Site above:

1

The mains plug is used as disconnect device, the disconnect device shall remain readily

operable.

WARNING

apparatus.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Need help? sanyo-av.com 1-800-877-5032

2

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16

Need help? sanyo-av.com 1-800-877-5032

3

Note to CATV system installer:

This reminder is provided to call CATV system installer’s attention to Article 820-40 of the NEC that

provides guideline for proper grounding and , in particular, specifies that the cable ground shall be

connected to the grounding system of the building, as close to the point of cable entry as practical.”

17.

18.

19.

20.

An outside antenna system should not be located in the vicinity of overhead power lines or other

electrical light or power circuits, or where it can fall into such power lines or circuits. When

installing an outside antenna system, extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

Wall or Ceiling Mounting – The product should be mounted to a wall or ceiling only as

recommended by the manufacturer.

Apparatus shall not be exposed to dripping or splashing, and no object filled with liquids, such as

vases, shall be placed on it.

When the MAINS plug is used as the disconnect device, the disconnect device shall remain

readily operable.

Need help? sanyo-av.com 1-800-877-5032

4

Table of Contents

Chapter 1: Connections and Setup

Chapter 2: Menu Operation

Chapter 3:Other Information

5

6

7

8

10

12

13

14

16

1

2

16

17

18

19

20

21

22

23

24

25

27

28

Before Initial Setup ..............................................................................................................................

Check Supplied Parts...........................................................................................................................

Attaching Your TV to the Stand Base..................................................................................................

Mounting Your TV to the Wall .............................................................................................................

Buttons on the TV ................................................................................................................................

Explanation of jacks on TV ..................................................................................................................

Choose Your Connections ....................................................................................................................

Remote Control Functions ..................................................................................................................

Obtain the Signal ................................................................................................................................

Switching On .......................................................................................................................................

Switching Off .......................................................................................................................................

Setup Wizard .......................................................................................................................................

Input List ..............................................................................................................................................

Important Information ...........................................................................................................................

Important Safety Insructions ................................................................................................................

Menu .....................................................................................................................................................

Picture ..................................................................................................................................................

Sound ...................................................................................................................................................

Channel ................................................................................................................................................

Setup ....................................................................................................................................................

Lock .....................................................................................................................................................

Help ......................................................................................................................................................

PC ........................................................................................................................................................

VIDEO/HDMI ......................................................................................................................................

USB ......................................................................................................................................................

Photo ....................................................................................................................................................

Frequently Asked Questions (FAQS) ....................................................................................................

Troubleshooting ....................................................................................................................................

Care and Cleaning ...............................................................................................................................

Television Specifications .......................................................................................................................

.........................................................................................................................................

Limited Warranty ...................................................................................................................................

Specification

Need help? sanyo-av.com 1-800-877-5032

5

Chapter 1

Owner's Manual

QUICK‘N EASY Setup Guide

Remote Control

Parts for Stand Base

Need help? sanyo-av.com 1-800-877-5032

6

Note:The picture of stand installation is just for the reference, please base on the material object for

the real sample.

For FW65D25T please see B -1.

FW65D25T

FW32D25T

FW42D25T

Base

base unassembled table

stand

Note:Stand base screws

are located in the

literature package.

① ②①

Need help? sanyo-av.com 1-800-877-5032

B - 1

③

Model Mounting screws measurements

①

M4 (4mm) Diameter, Length-12mm (maximum) x 4

②

ST4 (4mm) Diameter, Length-20mm (maximum) x 4

①

M5 (5mm) Diameter, Length-12mm (maximum) x 4

②

ST4 (4mm) Diameter, Length-20mm (maximum) x 4

③

M5 (5mm) Diameter, Length-20mm (maximum) x 4

7

Recommendation to buy screws:

FW32D25T

FW42D25T

FW65D25T

M4

M6

1

2

4

2

4

FW32D25T M4X10.max(10mm)

FW42D25T M6X20.max(20mm)

FW65D25T M6X15.max(15mm)

The VESA number is the horizontal and vertical measurement of the mounting holes. For example,

400x200 refers to the fact that the mounting measurements are 400mm horizontally and 200mm vertically.

Need help? sanyo-av.com 1-800-877-5032

1

2

3

4

5

6

7

8

(Please base on the material object for the real sample.)

1

2

3

4

55

6

7

ENTER

Buttons on the TV

Take a certain model for an example:

Need help? sanyo-av.com 1-800-877-5032

9

ANTENNA/CABLE IN this socket can be used to connect the outside aerial

(including the analog signal and the digital signal)

HDMI 2 (High-Definition Multimedia Interface)

Provides an uncompressed digital connection that carries both video and

audio data by way of an integrated mini-plug cable.

3

Device

Digital

(For DVI input, it's audio input is shared with PC audio input)

Note: For the audio receiver control ARC, firstly you must have a device which supports

HDMI ARC, then connect it to the HDMI1 port. When the "ARC/CEC Setting" is enabled on

your TV, the TV set's speakers will mute automatically and the audio will be outputted on

your ARC sound device system.

Visual Interface (DVI), the jack on the side of your TV is also compatible with DVI

devices.

USB Allows you to connect a compatible mass storage device for the display of JPEG

pictures on the TV.

OPTICAL OUTPUT：It is possible to output audio through the digital audio terminal.

AUDIO OUTPUT the socket provides composite audio connection.

support amplified high power audio equipment. Please adjust the volume directly on

the external audio equipment. Please do not connect headphones directly to the TV.

The TV can

Need help? sanyo-av.com 1-800-877-5032

10

Compatibility

WXGA

480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz

, 1080p/60Hz

Need help? sanyo-av.com 1-800-877-5032

11

3

List

Video

VIDEO INPUT

INPUT

Need help? sanyo-av.com 1-800-877-5032

12

Press to

select the desired option

open the Input list, then press / to

.

/OK

RECALL

press the RECALL button return to the previously

viewed channel.

CC

the menu.

Playing photos in the USB menu.

Need help? sanyo-av.com 1-800-877-5032

Displays the Audio portion of programming as text

superimposed over the video.

USB

RESET AUDIO

SLEEP

MC42FN00

INFO

TV

FAVORITE

VOL

CH

PICTURE

EXIT

MENU

CC

RECALL

SUB CH

INPUT

POWER

SHAPE

PIX

MUTE

ENTER

OK

audio mode.

Install two (2) "AAA" batteries (not included) in the remote control.

13

ANTENNA/

CABLE IN

Connect the outside aerial or cable network to the

ANTENNA/CABLE IN on the back of the TV set to

receive off-air channels or cable channels.

The first step in connecting your TV is obtaining the signal. The back panel of your TV allows you to receive

analog and/or digital channels by using the ANTENNA/CABLE IN.

Need help? sanyo-av.com 1-800-877-5032

14

Need help? sanyo-av.com 1-800-877-5032

Connect an RF cable to the TV's ANTENNA/CABLE

IN terminal.

Select TV Location

1. Press / button on the remote control to select

Home Mode or Store Mode.

2. Press ENTER button to go.

1. Choose "Quick setup" or "Step by step" to setup

your new television.

2. Press ENTER button to go.

Use ARROW keys to highlight your choice and then press ENTER/OK key.

Please select proper location for your TV.

Display will be adjusted for best result.

Home mode qualifies

for ENERGY STAR.

Store mode is for the

retail display setup

Home

Store

Home mode is for saving energy

and reducing power consumption.

Use ARROW keys to highlight your choice and then press ENTER/OK key.

to set up your new television.

Quick setup

(Advanced users)

Setp by setp

(Recommended)

Search Start

Cable

Search Start

Skip

Please connect all inputs

to the terminals.

Make sure all of your

equipments switched on.

Use ARROW keys to highlight your choice and then press ENTER/OK key.

If you choose Please connect all

equipment to the TV's inputs and switch them on.

Then press ◄/► button to choose between an Air or

Cable search.

"Quick setup",

(Quick setup chosen)

Choose Initial Setup method

Setup Wizard

Analog channels:0 Digital channels:0

Channel search will be complete when blue progress bar reaches 100%

(PLEASE DO NOT INTERRUPT THE CHANNEL SEARCH,IT MAY TAKE A WHILE)

Use ARROW keys to highlight your choice and then press ENTER/OK key.

Analog channels: 0 Digital channels: 0

Input search result:

Video

HDMI1

HDMI2

HDMI3

Finish

Repeat

Channel search result:

Successfully Completed

Air

Search channels from an indoor or outdoor antenna.

【】

Press the Finish button to finalize the Initial Setup and

enjoy watching TV.

NOTE: If you need to do the process again, please

choose Repeat.

【】Cable

Search channels from the cable provider.

Successfully Completed

Choose Antenna Information to get a high definition

picture, then press ◄/► button to choose between

an Air or Cable search.

If "Step by step" is chosen, options will be more detailed.

Press Continue button to advance.

Use ARROW keys to highlight your choice and then press ENTER/OK key.

to set up your new television.

Quick setup

(Advanced users)

Setp by setp

(Recommended)

(Setp by setp chosen)

Looking for a high definition picture?

Please take a moment to review the required connections.

Antenna Information

Search Start

Cable

Search Start

Skip

Use ARROW keys to highlight your choice and then press ENTER/OK key.

15

Previous Continue

Use ARROW keys to highlight your choice and then press ENTER/OK key.

Connection check phase: Video

please turn on the power of apparatus and check connection.

DVD/Blu-ray

GAME

Y

(VIDEO)

Pb

Pr

L

R

Composite Component

Video

HDMI 1

HDMI 2

HDMI 3

Please choose a connection method.

Previous Continue

Use ARROW keys to highlight your choice and then press ENTER/OK key.

Connection check phase: Video

please turn on the power of apparatus and check connection.

DVD/Blu-ray

GAME

Y

(VIDEO)

Pb

Pr

L

R

Composite Component

Video

HDMI 1

HDMI 2

HDMI 3

Neither type of connection could be confirmed.

Use ARROW keys to highlight your choice and then press ENTER/OK key.

Connection check phase: HDMI

please turn on the power of apparatus and check connection.

DVD/Blu-ray

GAME

Video

HDMI 1

HDMI 2

HDMI 3

At least one connection cannot be checked.

Use ARROW keys to highlight your choice and then press ENTER/OK key.

Connection check phase: HDMI

please turn on the power of apparatus and check connection.

DVD/Blu-ray

GAME

Video

HDMI 1

HDMI 2

HDMI 3

Connection was successful.

Use ARROW keys to highlight your choice and then press ENTER/OK key.

Analog channels: 0 Digital channels: 0

Input search result:

Video

HDMI1

HDMI2

HDMI3

Channel search result:

Successfully Completed

Press

Press Next button to check connection in detail.

Repeat button to do the process again.

Press Continue button to go next.

If any connection is found, then you can see "Connection

was successful." with blue color.

Need help? sanyo-av.com 1-800-877-5032

Analog channels: 0 Digital channels: 0

Input search result:

Video

HDMI1

HDMI2

HDMI3

Finish

Repeat

Channel search result:

Successfully Completed

Use ARROW keys to highlight your choice and then press ENTER/OK key.

Previous Continue

Use ARROW keys to highlight your choice and then press ENTER/OK key.

Connection check phase: HDMI

please turn on the power of apparatus and check connection.

DVD/Blu-ray

GAME

Video

HDMI 1

HDMI 2

HDMI 3

At least one connection cannot be checked.

Press the Finish button to finalize the Initial Setup and

enjoy watching TV.

NOTE: If you need to do the process again, please

choose Repeat.

Connections that are found will be highlighted in blue

color.

Successfully Completed

ENERGY STAR is a set of power-saving

guidelines issued by the U.S.

Environmental Protection Agency(EPA).

ENERGY STAR is a joint program of the U.S.

Environmental Protection Agency and the

U.S.Department of Energy helping us all

save mone

y and protect the environment

through energy efficient products and

practices.

®

Please Select Language

English

French

Spanish

Use ARROW keys to highlight your choice and then press ENTER/OK key.

16

Input List

Press INPUT button to select among TV/VIDEO

/HDMI 1/HDMI 2/HDMI 3/PC/USB

Menu

1. Press MENU to display the main menu or return to

the previous menu or close the main menu.

2. Press / to highlight the desired menu icon, and

press to .enter

Menu Operation

Picture

1. Press MENU to enter the main menu, Press /

button to select.

2. Press to enter. (Press MENU again to exit or

back to parent menu.)

Move

Select

MENU

Return

【Picture Mode】

Adjust picture mode to change picture appearance.

Press / button to select(Power Saving/Standard /

Vivid / Mild / Manual).

Standard Produces a highly defined image in a

normally lit room.

Vivid Produces a highly defined image in a

brightly lit room

Mild Produces a highly defined image in a

soft lit room.

Manual Select to customize picture settings.

Power Saving Select to power saving mode settings.

Note: "Power Saving"make this product qualify for

ENERGY STAR, if you select some other options,the

power consumption may change.

Picture

Sound

Setup

Lock

LockChannel

Picture Mode

Brightness

Contrast

Color

Tint

Sharpness

Color Temperature

Backlight

Detailed Setting

Power Saving

50

Normal

50

90

Picture

Chapter 2

Help

Channel

Help

3.While Picture Mode is "manual", Press / button

to select among Picture Mode/Brightness/Contrast/

Color / Tint / Sharpness / Color Temperature /

Backlight/Detailed Settings.

4.Press button to enter.

5.Press / button to adjust.

6.Press MENU to exit it.

【Brightness】

Adjust darkness of black sections in the picture.

Press / button to adjust.

Items below are active while Picture mode

set to Manual. otherwise, they are gray.

Menu OperationMenu Operation

Need help? sanyo-av.com 1-800-877-5032

A menu screen asks you to set the location for TV.

Choosing“Home Mode” for the TV assigns the

optimal picture settings for most home

environments.

Use ARROW keys to highlight your choice and then press ENTER/OK key.

Please select proper location for you TV.

Display will be adjusted for best result.

Store mode is for the

retail display setup

Home

Store

Home mode is for saving energy

and reducing power consumption.

A menu screen asks you to select language among

English, French and Spanish.

Choosing

“Store Mode”,which is not

ENERGY STAR compliant, sets the unit up

with predefined settings for retail displays.

Home mode qualifies

for ENERGY STAR.

ENERGY STAR qualification. Use ◄/► to

select the desired location setting(

“Home

Mode or “Store Mode”); then press ENTER

/OK to continue to the next screen.

In this setting, the power consumption may

exceed the requirements of the

【Tint】

Adjust the hue (Red,Green,Blue) of the picture.

Press button to adjust. /

【Sharpness】

Object edges are enhanced for picture detail.

Press button to adjust. /

【Color Temperature】

Change the overall color cast of the picture.

Normal

Warm

Cool

Produces a vivid image.

Produces a red-hued image.

Produces a gentle blue-hued image.

【Backlight】

【Detailed Setting】

Adjust the backlight brightness

Press button to adjust. /

Press button to enter.

Menu OperationMenu Operation

Sound

1.Press MENU to enter the main menu, Press /

button to select.

2.Press to enter. (Press

MENU again to exit or back to

parent menu.)

3.While Sound mode is "manual", Press / button to

select among Sound Mode / Bass / Treble / Balance /

MTS / Audio Language / Digital Audio Output / Surround

Sound / ARC/CEC Setting / Auto Volume Control.

4.Press / button to adjust.

5.Press MENU again or back to parent menu.

【】Surround sound

【Auto Volume Control】

Set the auto volume control.

Press / button to select (On / Off).

【Color】

Adjust the color intensity of the picture.

Press button to adjust. /

【Contrast】

Adjust the white level of the picture.

Press / button to adjust.

17

Pix Shape

A

In PC mode, only "Full 100%" and "Point to Point" can

be selected.

djust how the picture fills the screen.

Wide

Zoom

Automatically Aspect Ratio Normal adjust

based on TV size and TV program.

Use to watch wide screen(16:9)

content.

Expands image to fill screen. Top and

button maybe cut off.

Noise Reduction

Set options to reduce video noise.

Off

Select to turn off video noise detection.

Low Detect and reduce low video noise.

Medium Detect and reduce moder

Off Turn off the digital audio system.

ate video

High Detect and reduce enhanced video

noise.

Move

Select

MENU

Return

Setup LockPicture

Picture

Sound

Sound Mode

Bass

Treble

Audio Language

ARC/CEC Setting

Surround Sound

Standard

50

0

English

Off

RAW

Off

Balance

MTS

Stereo

【MTS】

【Sound Mode】

Configures the multi-track sound.

Choose a predetermined sound mode or the Manual option

with features such as: Bass/ Treble/ Balance.

It is only available in ATV.

Press button to select (Stereo/SAP/Mono). /

Mono Sets the sound to mono.

Stereo Sets the sound to stereo when stereo

is not available, the sound is

automatically switched to mono.

SAP Sets the sound to the second audio

program.

【Audio Language】

Select the language supported by the chosen digital

channel. It is available Only in DTV.

Press button to select (English / / ). / French Spanish

Help

Channel

Auto Volume Control

Off

【】ARC/CEC Setting

Motion Sync

Press / button to select (Off/ Low/ Medium/ High)

(Only available for model: FW65D25T )

Need help? sanyo-av.com 1-800-877-5032

Channel

1.Press ENU to enter the main menu, Press M /

button to select.

2.Press to enter. ( ENU again to exit or

back to parent menu.)

MPress

3.If current source is TV,Press / button to select

among Air/Cable / Auto Scan/Favorite / Channel List/

Show/Hide / Channel Number / Channel Label.

4.Press button to adjust. /

5.Press ENU again or back to parent menu. M

【Air/Cable】

Select signal type.

Press button to select (Air/Cable). /

【Auto Scan】

Automatically search for channels.

Press / button to enter. ENTER

Are you sure to Auto

Scan?

No

Yes

Analog

Digital

RF CH

Total Found

1

--

4

1

:

【Favorite 】

Add channels to create a favorite list.

Press ENTER/ button to enter.

【Channel List】

Display list for channels.

【Show/Hide】

Show or hide the channels in your program list.

Press / button to enter.ENTER

【Channel Number】

Show the channel number.

Press button to adjust. /

【Channel Label】

Create labels for channels, up to 7 characters.

18

Move

Select

Move

MENU

Return

Sound Setup Lock

Picture

Channel

Favorite

Channel List

Show/Hide

Channel Number

Channel Label

Auto Scan

Air/Cable

Air

Channel

Channel Label

3-0

4-0

5-0

6-0

7-0

1/ 1

Press ok’change ‘

Press‘ok’change

Move

Return

MENU

Hide

Menu Operation

Help

Sound Setup Lock

Picture

Channel

Help

Sound Setup Lock

Picture

Channel

Help

Sound Setup Lock

Picture

Channel

Help

Need help? sanyo-av.com 1-800-877-5032

3.Press / button to select among Menu Language /

Closed Caption /Over Scan/Input Label /

Other settings /Restore Default /Setup Wizard /

Sleep Timer.

4.Press button to adjust. /

5. ENU again or back to parent menu. Press M

【Menu language】

Press button to select language (English / /

Français / Español.)

【Closed Caption】

Adjust Closed Captioning settings. Only available

under TV and AV source.

Press / button to enter. ENTER

CC Mode

Turn Closed Captioning on/off.

Press button to select (CC Off / CC On / CC /

On Mute).

Analog CC

Set Closed Captioning for standard(analog) program.

Press button to select (CC1 / CC2 / CC3 / /

CC4 / Text1 / Text2 / Text3 / Text4).

Digital CC

Set Closed Captioning for digital program.

Press button to select (Service1 / Service2 / /

Service3 / Service4 / Service5 / Service6 / Off).

Setup

1.Press MENU to enter the main menu, Press /

Button to select.

2.Press to enter. (Press MENU again to exit or

back to parent menu.)

19

Move

Select

MENU

Return

LockChannelPicture

Picture

Sound

English

Off

Setup

Menu Language

Closed Caption

Over Scan

Other Settings

Input Label

Restore Default

Setup Wizard

Adjust the digital Closed Captioning setting.

Mode

Set the look of digital Closed Captioning.

Press button to select (Default / Custom). /

Font Style

Select from 8 font styles.

Press button to select (Default / Font 0 / Font 1 / /

Font 2 / Font 3 / Font 4 / Font 5 / Font 6 / Font 7).

Option

Font Size

Adjust the size of the digital Closed Captioning font.

Press button to select (Default /Normal / Small /Large).

Press / button to enter.ENTER

Menu Operation

FG Opacity

Adjust the transparency of the digital Closed Captioning

font.

Press button to select (Default / Solid / Flashing //

Translucent / ).Transparent

BG Opacity

Adjust the digital Closed Captioning background

transparency.

Press button to select (Default / Solid / /

Flashing / Translucent / ). Transparent

*Note: All the options can be adjusted while the

mode is Custom.

FG Color

Adjust the color of the digital Closed Captioning font.

Press button to select (Default/ White /Red /

Green / Blue / Yellow / Magenta / Cyan).

/

BG Color

Adjust the digital Closed Captioning background color.

Press button to select (Default/ Black / Red /

Green /Blue/ Yellow / Magenta / Cyan).

/

【Input Label】

【Over Scan】

Press / button to enter. ENTER

Press button to select (Off / On). /

The setting of Over Scan on/off

Help

Sleep Timer

Off

Need help? sanyo-av.com 1-800-877-5032

Page is loading ...

Sanyo FW32D25T Owner's manual

This manual is also suitable for

Sanyo FW32D25T Owner's manual

Related papers

Other documents