ATS-TN SkyAngel 911FD User manual

  • Hello! I am an AI chatbot trained to assist you with the ATS-TN SkyAngel 911FD User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
User’s Guide for the SkyAngel911FD Friends
DEVICE CHARGING:
For the first time of use, please fully charge the unit for at least 2~3 hours
Using the USB charger or using docking station to charge
Place the device on the docking station.
Connect the Micro USB side of the cable to the docking station port and connect
the other end of the cable to the designated AC power source (USB/AC adaptor).
SWITCHING THE DEVICE ON AND OFF:
To turn on the device: press the side power button for 1 second, all the LEDs
will flash rapidly. Device can be also turned on automatically by charging via
USB or put it into the docking station.
To turn off the device: press and hold the side button and SOS button together
for 1 second until the LEDs off.
WATERPROOF:
Your SkyAngel 911FD is 100% waterproof and can be worn in the shower or even
submerged under water for brief periods of time. Do not submerge for longs periods of
time.
PLEASE NOTE: Do not remove the back cover at any time; this will break the
waterproof seal. Also, removing the back cover voids any and all warranties.
LOCATING/STATUS:
To receive a text message with a GoogleMaps link to the current location of the device
send a text to the phone number associated with the device. The body of the text should
be ‘LOC’. To receive a text message with the device status such as programmed
numbers and battery status send a text to the phone number associated with the
device. The body of the text should be ‘STATUS’.
GPS LOCATING:
The precision that 911 will be able to locate the unit can range from several feet to
hundreds of feet. This unit has full two-way voice communication and that should be the
primary method to direct assistance to the user.
WHAT DO THE FLASHING LIGHTS ON THE SIDE OF THE UNIT MEAN?
Charging Status Blue Light:
Blue light is on solid: the unit is charging
Blue light is blinking quickly: unit has less than 15% power and should be
recharged
Blue light is off / blinking slowly: unit is fully charged
CELL SIGNAL Status Green Light:
Green single flash every 3 seconds: unit is connected to Cellular network
PROGRAMMING THE UNIT:
The unit has 2 buttons that will dial: the SOS button on the top and the On/Off/Call button on the side.
The unit can store 3 contact numbers. Contacts 1, 2 and 3 can be dialed when you press the SOS button.
Contacts 2 and 3 are can be dialed alternately by pressing the On/Off/Call button.
To program the contact numbers send a text message to the phone number assigned to your unit.
To program the first contact send a text message exactly as follows: ‘a1,PHONE NUMBER TO CALL’
To program the second contact send a text message exactly as follows: a2,PHONE NUMBER TO CALL’
To program the third contact send a text message exactly as follows: a3,PHONE NUMBER TO CALL’
Example, to program the first contact number as 1234567890, send the following text message to the
phone number assigned to the device ‘a1,1234567890’
ACTIVATING AN SOS ALARM:
Press and hold the SOS button for 3 seconds until the device vibrates, and then the
green light will start to flash rapidly to confirm the request. After that, the unit will text
and then call your 3 contact numbers in order.
--OR --
Press the On/Off/Call button on the side for 3 seconds until the unit vibrates, and then
green light will start to flash to confirm the request. After that, the unit will call the
second and third contact numbers in order.
To end the call, press the SOS button.
LOW BATTERY ALARM:
The SkyAngel 911FD has a Low Battery Alarm. When the battery on the unit gets to
less than 15%, the blue light on the unit will flash rapidly to warn the user that the unit
needs to be charged.
AUTOMATIC FALL DETECTION:
When the unit detects a fall from at least 2 feet above the ground it will begin to beep.
This is to indicate that it has detected a fall and will soon begin to call 911 automatically.
After approximately 10 beeps it will call 911. To cancel the call before it calls 911, press
the SOS button.
For questions or technical assistance, please contact our office:
Assistive Technology Services - (615) 562-0043 - [email protected]
NOTE: Our hours of operation are Monday Friday, 8:00 AM 6:00 PM Central Time
V041318g
/