Abtus AV-891-1500 User's Operation Manual

Category
Projector mounts
Type
User's Operation Manual

This manual is also suitable for

Abtus AV-891-1500 is a versatile and reliable short throw projector wall mount designed to enhance your projection experience. Its robust construction supports projectors weighing up to 10kg, ensuring secure and stable placement.

Key Features:

  • Adjustable Projection Distance: The extendable wall mount arm allows you to adjust the distance between the projector and the screen, providing flexibility in room setup.

  • Pan, Tilt, and Rotate Functionality: Effortlessly adjust the projector's position to achieve the perfect image alignment and viewing angle.

  • Cable Management: Keep your cables organized and out of sight, ensuring a clean and professional appearance.

Abtus AV-891-1500 is a versatile and reliable short throw projector wall mount designed to enhance your projection experience. Its robust construction supports projectors weighing up to 10kg, ensuring secure and stable placement.

Key Features:

  • Adjustable Projection Distance: The extendable wall mount arm allows you to adjust the distance between the projector and the screen, providing flexibility in room setup.

  • Pan, Tilt, and Rotate Functionality: Effortlessly adjust the projector's position to achieve the perfect image alignment and viewing angle.

  • Cable Management: Keep your cables organized and out of sight, ensuring a clean and professional appearance.

ABtUS SINGAPORE PTE LTD www.abtussingapore.com
ABtUS SIGAPORE PTE LTD www.abtussingapore.com
SHORT THROW
PROJECTOR
WALL MOUNT
Model: AV-891-610
Model: AV-891-1500
Revision C2
User Operation Guide
2
PACKAGE CONTENTS
Item 1
Wall Arm - 1 set
Item 3
Screws bag 1 - 1 set
Item 4
Screws bag 2 - 1 set
Item 5 - for AV891-1500 ONLY
Screws bag 3 - 1 set
Part A
Phillips Head Screw
M4x15 ------- 4 pcs
Part 1
Wall Anchor
---- 4 pcs
Part 1
M6 Eye-bolt – 1pc
Part F
Phillips Head Screw
M4x25 ------- 4 pcs
Part K
Spacer 2mm --- 4 pcs
Part 6
# 6 Allan Key
---- 1 pc
Part B
Phillips Head Screw
M4x20 ------- 4 pcs
Part 2
lag Bolts
---- 4 pcs
Part 2
Wire Clip – 2pcs
Part G
Phillips Head Screw
M5x15 ------- 4 pcs
Part L
Spacer 4mm --- 4 pcs
Part C
Phillips Head Screw
M4x25 ------- 4 pcs
Part 3
Washers
---- 4 pcs
Part 3
Steel Wire – 3 meter
Part H
Phillips Head Screw
M5x20 ------- 4 pcs
Part M
Base Spaver ------- 4
pcs
Part D
Phillips Head Screw
M4x15 ------- 4 pcs
Part 4
Extension Bars
----- 4 pcs
Part I
Phillips Head Screw
M5x25 ------- 4 pcs
Part E
Phillips Head Screw
M4x20 ------- 4 pcs
Part 5
# 3 Allan Key
---- 1 pc
Part J
Spacer 1mm --- 4 pcs
Item 2
Universal Mount - 1 set
*Speci cations are subject to changes without notice.
3
INSTALLATION
Step - 1
Mark the position on the wall for the Wall Plate. Drill and insert Wall Anchors (in Item 4)into concrete wall.
Note: do not use Wall Anchor for mounting on wooden wall.
Note: Mounting position will be vary dependant on the Brand and Model of Projector used. Please refer to
Projector User Manual for installation details.
Step - 2
Mount Wall Arm (Item 1) onto wall by using the Lag Bolts and Washers (in Item 4) provided.
markings
Wall
Hammer
Gently
Push in
Wall
Lag bolts and Washer
4
Step - 3
Fix Universal Mount (Item 2) with Base Spacer (“M” in Item 3) and Screws (“A” - “I” in Item 3) onto
Projector.
Step - 4
Lift and hook the assembled projector (in Step-3) onto the adaptor hook of the Wall Arm. Secure and
tighten the Cap screws on both side of the hook.
Base
spacer
Adaptor hook
Lift and Hook
Cap Screws
*Speci cations are subject to changes without notice.
5
Step - 5
Cables management: cables can be routed from the opening on the top of the Wall Arm through the arm
and out from the other end of the adjustable arm (remove the End cover for easy access).
Cable routed from
here
Cable out
from here
End Cover
6
Step - 6 Adjustments:
6a. Projection distance —refer to Projector User Manual and dependant on the required diagonal size of
image, adjust the distance from the “face of the Screen” to the “front of the projector” (nearest part to
screen) by loosening the Hand Knob and extend along the Wall Mount Arm.
6b. Pan / Tilt / Rotate Projector to adjust the projection image onto the screen.
Hand Knob
Tilt
adjust
Projection distance
Diagonal size of image
Pan
SCREEN
Note: Do consult a quali ed and authorized service technicians if you encounter any technical dif culties.
We are not liable for any damange or injury arising from any improper installation or mishandling.
*Speci cations are subject to changes without notice.
7
SAFETY STEEL WIRE INSTALLATION GUIDE For AV891-1500 ONLY
Note: Do consult a quali ed and authorized service technicians if you encounter any technical dif culties.
We are not liable for any damange or injury arising from any improper installation or mishandling.
1. For additional safety, steel wire must be installed when projector weight is more than 5kg or arm is
extended 1.2m – 1.5m
2. Steel wire must be xed on a strong concrete wall, wooden stud or beam. Do not x steel wire on
any unsafe objects.
7+,6(1'72%(),7
2172:$//
25%($0
67((/:,5(
72%(&8772
5(48,5('/(1*7+
6$)(7<67((/:,5(,167$//$7,21*8,'(
0
(<(%2/7
:,5(&/,3
:,5(&/,3
ABtUS SINGAPORE PTE LTD www.abtussingapore.com
SPECIFICATION
AV891-610 AV891-1500
Gross Weight : 4.5kg (9.9 lbs) 6.8kg (15 lbs)
Gross Dimension : 460 x 315 x 205 mm 920 x 315 x 205 mm
Distance From
Projector Wall : Min. 432mm | Max. 613mm Min.901mm | Max.1515mm
Load Capacity : 10kg (22 lbs) 10kg (22 lbs)
** For details and updated Command and Program Software, please visit and download from www.abtussingapore.com
*Speci cations are subject to changes without notice.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Abtus AV-891-1500 User's Operation Manual

Category
Projector mounts
Type
User's Operation Manual
This manual is also suitable for

Abtus AV-891-1500 is a versatile and reliable short throw projector wall mount designed to enhance your projection experience. Its robust construction supports projectors weighing up to 10kg, ensuring secure and stable placement.

Key Features:

  • Adjustable Projection Distance: The extendable wall mount arm allows you to adjust the distance between the projector and the screen, providing flexibility in room setup.

  • Pan, Tilt, and Rotate Functionality: Effortlessly adjust the projector's position to achieve the perfect image alignment and viewing angle.

  • Cable Management: Keep your cables organized and out of sight, ensuring a clean and professional appearance.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI