Abtus AV483-L360A User manual

Category
Flat panel wall mounts
Type
User manual

Abtus AV483-L360A is a plasma/LCD display wall mount suitable for 23” to 42” screens. It has a load capacity of 36kg (80 lbs) and allows for 12 degrees of tile angle and a distance from the wall of 50mm (1.97”). The wall plate dimensions are 430mm (16.9”) x 175.4mm (6.9”) and the length of the hook is 232mm (9.1”). The mount comes with all necessary hardware for installation, including screws, washers, and caps. It is easy to install and comes with a user operation guide for assistance.

Abtus AV483-L360A is a plasma/LCD display wall mount suitable for 23” to 42” screens. It has a load capacity of 36kg (80 lbs) and allows for 12 degrees of tile angle and a distance from the wall of 50mm (1.97”). The wall plate dimensions are 430mm (16.9”) x 175.4mm (6.9”) and the length of the hook is 232mm (9.1”). The mount comes with all necessary hardware for installation, including screws, washers, and caps. It is easy to install and comes with a user operation guide for assistance.

ABtUS SINGAPORE PTE LTD www.abtussingapore.com
ABtUS SIGAPORE PTE LTD www.abtussingapore.com
ABtUS SINGAPORE PTE LTD www.abtussingapore.com
Plasma/ LCD
Display Tilt
Wall Mount
Model: AV483-L360A
SPECIFICATION
Plasma Size : Suitable for 23” to 42”
Wall Plate Dimension : 430mm (16.9”) x 175.4mm (6.9”)
Length of Hook : 232mm (9.1”)
Tile Angle : 12 degrees
Distance from Wall : 50mm (1.97”)
Load Capacity : 36kg (80 lbs)
** For details and updated Command and Program Software, please visit and download from www.abtussingapore.com
*Specications are subject to changes without notice.
Revision 20.03.2019
*Specications are subject to changes without notice.
User Operation Guide
Step-2
Step-3
Diagram A
OR
Step-1
COMPONENTS
INSTALLTION
INSTALLATION
Step 1: Insert Side Brackets (c) into Rectacgular Tubes (a).
Step 2: Secure with Self Tapping Screws (e) provided.
Step 3: Fix Tilt Brackets (d) onto Side Brackets (c) on left and right side with Cap screws (f),
and Washers (g)
Note: use inner hole for a closer space between wall and Plasma without tilting function
(see Diagram A)
Step 4: Fix Hooks (b) on to back of Plasma TV with screws (i), (j) or (k)
Note: if screws provided can;t t, please refer to the Plasma TV user manual for the correct
mounting thread screw size.
Step 5: Fix Bracket onto Wall (not shown). Lift and hook Plasma TV onto Bracket.
Step 6: Secure Plasma TV with Hook with screws (h) provided.
NOTE: Do consult a qualied and authorized service technician if you encounter any technical
diculties. We are not liable for any damage or injuries arising from any improper installation or
mishandling. Now, enjoy your Plasma TV unit !!
(a)
Rectangular Tube - 2pcs
(b)
Hook - 2pcs
(c)
Side Bracket - 2pcs
(d) Tilt Bracket Right/Left
- 1 pc each
(e) Self Tapping
Screw - 4pcs
(f)
Cap Screws - 4pcs
(g)
Washers - 4pcs
(h) M4 x 35 Screws - 2 pcs (i) M4 x 15 Screws
- 6 pcs
(j) M5 x 15 Screws
- 4 pcs
(k) M6 x 15
Screws - 4 pcs
Plasma TV
Hook
Step-4
Step-5
Step-6
  • Page 1 1
  • Page 2 2

Abtus AV483-L360A User manual

Category
Flat panel wall mounts
Type
User manual

Abtus AV483-L360A is a plasma/LCD display wall mount suitable for 23” to 42” screens. It has a load capacity of 36kg (80 lbs) and allows for 12 degrees of tile angle and a distance from the wall of 50mm (1.97”). The wall plate dimensions are 430mm (16.9”) x 175.4mm (6.9”) and the length of the hook is 232mm (9.1”). The mount comes with all necessary hardware for installation, including screws, washers, and caps. It is easy to install and comes with a user operation guide for assistance.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI