READ ME FIRST
Thank you for your purchase of the Aiptek GO-HD DV! This Read Me First will
introduce you to the GO-HD DV and illustrate how to get the best from your camera.
NOTICE: For more details on camera operations, please see the electronic
manual on the accessory CD or our web site www.aiptek.com.
You may also find additional parts, accessories, and products on our online store
at www.aiptek.com!
AIPTEK Service: AIPTEK, Inc.
51 Discovery
Suite# 100
Irvine, CA 92618 USA
TEL: 949.585.9600
FAX: 949.585.9345
Email: [email protected]
www.aiptek.com
Charging the Battery Camera Overview
Note: Please Charge Battery for 3.5 hrs before using GO-HD.
There are two ways to charge the battery.
A:
Plug the AC adapter (1A) into power outlet and USB end into
Camera (2B). The indicator light (3C) will turn RED indicating the
camera is charging the battery. The Red light will turn off when
battery is fully charged.
B:
Plug the camera into the computer’s
USB Port.The indicator light (3C) will
turn RED indicating the camera is
charging the battery. The Red light will
turn green when battery is fully charged.
(1A) AC Adapter
USB Port
(2B)
* (JOYSTICK - Press “Down” for LED Lights - “Up” for 2 Inch Macro Mode
- “Left” to turn on Flash - “Right” to select White Balance)
Tips to using the GO-HD
3X Optical Zoom:
• Slide the Zoom Button “Up” to “zoom in”.
Slide the Zoom Button “Down” to “zoom out”.
- Description of Zoom Graph on Right Side of LCD.
Digital Camera
• Insert SD card first (256MB ~ 4GB).
• Press the snapshot button half way down for camera to auto focus.
- When focus indicator [ ] turns green, the camera is focused.
• Continue to press the snapshot button fully.
• Be sure to hold the camera steady for about 1-2 seconds until after you’ve heard the camera’s snapshot sound. You can now release the snapshot
button for the best shot.
• The image appears on the LCD monitor for one second and is saved to the SD Card.
When using Flash
• In low light the camera will flash a standard one (1) time.
• In darker conditions the camera will flash two (2) times.
• Be sure to hold the camera steady upon taking the photo; hold still for about 1-2 seconds until after you’ve heard the camera’s snapshot sound for the
best shot.
LED Lights
• Press downward once on the Joystick to turn LED Lights “ON”, twice to switch to “Auto”, and a third time to “Turn Off”.
• Assists in videos and flash photos in very low light conditions.
Nightshot Mode
• For Photos; best used when combined with Flash Strobe.
• Be sure to hold the camera steady upon taking the photo; hold still for about 2-3 seconds until after you’ve heard the camera’s snapshot sound for the
best shot.
• It’s recommend to leave this feature off to help accelerate everyday photo taking and prolong battery life.
* Joystick
Snap Shot Button
AV OUT
Previous / RWD Button
LCD Panel
Zoom (In/Out) Button
Video Record Button
Menu Button
Next / FWD Button
Play / Pause Button
USB Port
HD OUT
Mode Button
Indicatior Light
(3C) Indicator Light
Zero X Optical Zoom
3X Optical Zoom
[這是正面] SIZE:A4 印刷:單色雙面(請選用淡粉紅色紙張印刷) 最後請對摺成A6大小
It’s normal that the GO-HD will feel slightly warm with continuous use / recording due to its high performance.
/