ORANGE Surf & Pay User manual

Surf & Pay

User guide

contents

2

Welcome

Introduction

2. Hardware and browser requirements

3. Check and install the hardware

step 1 : Contents of the box.

step 2 : Install Wi-Fi & 3G antennas, insert SIM into SIM slot.

step 3 : Plug your Surf & Pay to the main socket to recharge the embedded battery.

step 4 : Connect PC and switch on Surf & Pay.

step 5 : Discover your Surf & Pay : check LED status.

step 6 : Surf & Pay main functions. Broadband internet access.

step 7 : Where should you locate your Surf & Pay ?

4. Software set-up

step 1 : Launch your web browser.

step 2 : Login in and basic settings.

step 3 : Check 3G status.

step 4 : Clock settings.

step 5 : Wi-Fi connection.

contents

3

5. Owner’s customer charging

step 1 : Create a new pricing.

step 2 : Create a customer account.

step 3 : Re-charging an end user.

step 4 : End user checkout.

step 5 : End user expired account.

step 6 : End user deleting account.

step 7 : End user History Data.

6. End user focus

A - The end user has a PC.

B - The end user comes with his Wi-Fi laptop.

7. End user management

step 1 : End user monitoring.

step 2 : End user pause.

step 3 : End user leave.

8. End user paid record

9. End user historical report

contents

Thank you for choosing Orange and Surf & Pay. Your Surf & Pay is equipped with

the best mobile technology to provide you with high speed broadband services.

To install Surf & Pay service, you need a data SIM card, a computer equipped with an

Ethernet or Wi-Fi connection and an internet browser.

Installation instructions are for Windows XP, Vista ans Windows 7 users, but your Surf

& Pay is compatible with most computers like Apple and Linux.

In order to fully exploit all your Surf & Pay features, please follow the instructions

carefully when :

Connecting your Surf & Pay to a mobile network.

Conguring your computer and settings up a wired (Ethernet) or wireless (Wi-Fi)

connection to your Surf & Pay.

It will only take a few minutes to connect your computers to the mobile network after

which you’ll be able to access to the available services.

Welcome !

4

1

contents

5

1

With network coverage provided by Orange, Surf & Pay transform the

3G signal to Wi-Fi signal and worked as internet access point. It could

provide charge service in hotel, restaurant, Internet cafe and cruise, etc.

increasing people’s life convenience and also make prot.

Surf & Pay embedded billing system in and GUI, so reseller could

manage it without external devices and software besides a normal PC with

browser like IE8. With battery inside, Surf & Pay provides consistent

persistent internet service via 3G+/3G for consumer even when main

power supply is cut off.

Introduction

contents

6

Key features include :

Simplicity : provides a user-friendly interface without needs of

any other hardware and software except a browser like IE8.

Billing system : it supports user management, monitor, checkout,

recharging, receipt print and history data inquiry.

Battery : chargeable battery embedded. It could afford at least

4 working hours for Surf & Pay without main power supply.

1

contents

7

2. Hardware and browser requirements

To manage Surf & Pay offer, you need a simple personal computer

with a LAN connection and an internet browser with the following

requirements :

Microsoft Internet Explorer 6

Microsoft Internet Explorer 7

Microsoft Internet Explorer 8

Microsoft Internet Explorer 9

Firefox

Apple Safari

Chrome

2

contents

8

3. Check and install the hardware

3

Step 1 : Contents of the box

contents

9

3

Step 2 : Install Wi-Fi & 3G antennas, insert SIM into SIM slot.

Connect 3G and Wi-Fi antennas, then insert SIM card into the SIM slot

provided.

See diagram below :

Step 3 : Plug your Surf & Pay to the main socket to recharge the

embedded battery.

Connect main supply by power adapter

(also could be powered by embedded

battery) then the embedded battery will

start charging. Please use power

adapter provided by Orange only to

avoid problems.

contents

10

Step 4 : Connect PC and switch on Surf & Pay.

Connect one end of the Ethernet cable to your PC’s LAN port, connect

another end to LAN port of Wi-Fi router. Then switch on the Wi-Fi router.

See diagram below :

3

contents

11

3

Step 5 : Discover your Surf & Pay : check LED status.

After switch on the Surf & Pay, please check the LED status.

1 - Power : light means you connected the power adapter correctly.

2 - BAT-C : light means the battery is charging now.

3 - BAT-L : orange shows low power, green means sufcient power.

4 - Wi-Fi : light means Wi-Fi is working.

5 - LAN : light means Ethernet cable connect correctly.

6 - Net : ash means connect 2.5G network, light means Ethernet cable is

connecting correctly.

7 - Signal : number of ash LED shows signal strength. 3 LED light means

signal is strong.

1 2 3 4 5 6 7

contents

12

3

Step 6 : Surf & Pay main functions.

Broadband internet access.

contents

13

Step 7 : Where should you locate your Surf & Pay ?

Your Surf & Pay service will provide you with broadband access via a

powerful 3G network.

In order to fully exploit all your Surf & Pay advanced features, please

follow these recommendations :

Locate your Surf & Pay where the mobile network signal is strongest

such as, for example, near a window.

Use the “Signal” indicators (7) to assess the strength of the signal.

For further information refer to “indicator status” (page 11).

Ensure it is located near power supply. If your Surf & Pay is located

near your computer, it is best to use a wired network (Ethernet).

3

contents

14

4. Software set-up

Step 1 : Launch your web browser.

Launch your web browser like IE8 : , and input 192.168.8.1 in address

bar as below.

4

contents

15

In “Advanced > System Tools > Account Management” menu.

Reseller could edit the password of reseller account.

Please change your password for security reason.

4

Step 2 : Login in and basic settings.

Default login with reseller account (username super, default password super).

contents

16

Step 3 : Check 3G status.

It’s showing the strength of the network speed. 3 types : Low,

Medium and Strong.

It’s appear green when the SIM card working.

It’s appear red when the SIM card not working.

It’s showing the type of connection you have 3G or 2G.

4

contents

17

Step 4 : Clock settings.

Note : clock is very important for the use of Surf & Pay service. So make sure

clock in Surf & Pay showing in the right top corner of user interface is correct.

4

Manual : Input the real clock manually and click “Save”.

Go to ‘‘Advanced > System tool > Clock’’ in submenu.

You could set the clock Manual :

contents

18

Step 5 : Wi-Fi connection.

Go to ‘‘Advanced > Wi-Fi > Wi-Fi basic” to change the Wi-Fi settings if

necessary. Reseller needs to inform their end user this access point name

(SSID), so end user could search it via their PC with Wi-Fi feature.

4

contents

19

5. Owner’s customer charging.

Step 1 : Create a new pricing (1/3).

Go to ‘‘Billing > Pricing’’. Add new price to dene your price that you will

charge to your customers before starting using Surf & Pay billing service.

It’s available with 2 optional pricing methods.

Click ‘‘Add’’ to add new price :

5

contents

20

Charging by time : you use it when the customer would like to use the

internet on time base (for example 1 euro/hour).

Charging by volume : you use it when the customer would like to use

the internet on volume base (for example 1 euro/MB).

5

Step 1 : Create a new pricing (2/3).

Page is loading ...

ORANGE Surf & Pay User manual

Other documents