2. Metrologic
  3. MS9530 Voyager RF Series

Metrologic MS9530 Voyager RF Series, MS9530, VOYAGER MS9530 User manual

  • Hello! I am an AI chatbot trained to assist you with the Metrologic MS9530 Voyager RF Series User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1.- Steps to link MS9530 Voyager RF with Base Station.
-Please read the following barcodes:
1º.-
Enter configuration
2º.- (*) Skip this step if you just want to change the link to another
Base station.
Following parameters are set:
-Base Station serial number :9999999999
-Voyager ID: 1
3º.-
Ready to read the new Serial number of Base Station to
send data to.
4º.-
Read Base Station
serial number.
5º.-
Exit Configuration
2.- MS9530 Voyager RF ID:
- Up to five units can work together with same Base Station. It is requested that each of them
uses a different ID. Use this section to fix the desired ID.
3.- BASE STATION (WEDGE): PC connection
-Please read the following barcodes:
1º.-
2º.-
3º.-
4º.-
5º.-
6º.-
7º.-
8º.-
9º.-
3.- BASE STATION (RS-232: 9600,8,N,1 + CRLF)
-Please read the following barcodes:
1º.-
2º.-
3º.-
4º.-
5º.-
6º.-
7º.-
8º.-
9º.-
/