Digi Wi-Wave 802.11b/g module Quick start guide
- Type
- Quick start guide
Shift
Digi Connect
Wi-Wave
Module
Development
Board
b
Connect USB cable
a
Shift
1
Verify kit contents
2
Install software
a
Software CD
Quick Start Guide
Digi Connect Wi-Wave
®
Power
supply
4
What’s next?
c
Add the appropriate plug and connect power supply
© 2010 Digi International, Inc.
Digi, Digi International, Inc., Digi Connect, and the Digi logo are trademarks or registered trademarks of Digi International, Inc., in the United States and other countries worldwide. All other trademarks are property of their respective owners.
Dipole antennas
(2 dBi)
Dipole antennas
(5 dBi)
USB Cable
Insert the CD and nd the installer for your operating system in the folder /installers/<os>/
(To the USB
port on the
development
board)
3
Connect hardware to development board
a
Choose appropriate antenna type and connect
b
b
c
Development board and
Digi Connect Wi-Wave module
b
Run the executable to install the Digi Connect Wi-Wave software and
documentation on your host PC
®
a
Refer to the User’s Manual PDF in the CD folder /docs/software/<os>/ or in the installation folder for further instructions about enabling and using the
Digi Connect Wi-Wave on your operating system
b
In Windows systems, the software is installed by default at C: \Program Files\Digi\AppKits\WiWave\ and a start menu entry is created in
Programs > Digi > Digi Connect Wi-Wave
In Linux systems, the software is installed by default at your home folder /home/username/wi-wave (the user may change the path during installation)
®
c
Additional hardware documentation like Schematics and the Hardware Reference Manual can be found in the installation folder and also on the CD
90000795_B
-
1
Digi Wi-Wave 802.11b/g module Quick start guide
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Digi Drums 90000797_A User manual
-
Digi Thing Plus - XBee3 Micro (U.FL) User manual
-
-
-
-
-
-
-
-
