Pelco VMX210-SYS Series Video Management System Installation guide

Brand: Pelco

Model: VMX210-SYS Series Video Management System

Type: Installation guide

Pelco VMX210-SYS Series Video Management System is a professional-grade video surveillance solution designed for demanding security applications. With its advanced features, it offers exceptional monitoring capabilities for a wide range of environments. It supports multiple video inputs, including analog and IP cameras, and allows for seamless integration with various Pelco control systems. The VMX210-SYS Series provides comprehensive control over connected cameras, enabling users to remotely adjust settings, manage presets, and perform other operations.

C1532M (1/06)

INSTALLATION/OPERATION

VMX210-SYS Series

VMX210 Video

Management System

C1532M (1/06) 3

Contents

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Installation of Support Rails . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Mouse and Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Monitor Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Dual-Monitor Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Video Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Spectra/Esprit Control Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

CM6800 Control Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

CM6700 Control Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

CM9700 Control Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

GENEX Multiplexer Control Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

VCR Control Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

CM9760-ALM Control Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

CM9760-REL Control Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

4 C1532M (1/06)

List of Illustrations

1 System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

2 VMX210 Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

3 VMX210 Rear View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

4 Rack Mount Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

5 Mouse and Keyboard Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

6 Monitor Port Adapter Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

7 How to Connect Monitors to a VMX210-SYS-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

8 How to Connect Monitors to a VMX210-SYS-Q. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

9 How to Connect Analog Video to the VMX210-SYS-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

10 How to Connect Analog Video to the VMX210-SYS-Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

11 Spectra/Esprit Control Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

12 CM6800 Control Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

13 CM6700 Control Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

14 CM9700 RS-422 Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

15 CM9700 RS-232 Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

16 Genex Multiplexer Control Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

17 TLR3000 Series VCR Control Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

18 CM9760-ALM Control Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

19 CM9760-REL Control Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

C1532M (1/06) 5

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.

A grounding plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not ﬁt into your outlet consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the points where they exit

from the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

14. Apparatus shall not be exposed to dripping or splashing and that no objects ﬁlled with liquids, such as vases shall be placed on the

apparatus.

15.

WARNING:

To reduce the risk of ﬁre or electric shock, do not expose this apparatus to rain or moisture.

16. Installation should be done only by qualiﬁed personnel and conform to all local codes.

17. Unless the unit is speciﬁcally marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not

be installed where exposed to rain and moisture.

18. Use only installation methods and materials capable of supporting four times the maximum speciﬁed load.

19. A readily accessible disconnect device shall be incorporated in the building installation wiring.

20. The socket-outlet shall be installed near the equipment and shall be easily accessible.

21. A CCC-approved power cord must be used to power this equipment when used in China.

CAUTION:

These servicing instructions are for use by qualiﬁed service personnel only. To reduce the risk of electric shock do not perform any

servicing other that contained in the operating instructions unless you are qualiﬁed to do so.

CAUTION:

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Dispose of used batteries

according to the instructions provided by the battery manufacturer.

Only use replacement parts recommended by Pelco.

The product and/or manual may bear the following marks:

This symbol indicates that dangerous voltage constituting a risk of electric shock is

present within this unit.

This symbol indicates that there are important operating and maintenance instructions

in the literature accompanying this unit.

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

6 C1532M (1/06)

Regulatory Notices

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

and correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

C1532M (1/06) 7

Description

The Pelco VMX210 Video Management System uses a Windows

-based interface for video security system control. You can control matrix

switchers, multiplexers, DVRs, VCRs, and Spectra

/Esprit camera positioning systems by using mapping conﬁgurations and a visual interface.

With a mouse, you can click a camera icon within your site map and drag it to a video display window.

The VMX210 uses an interactive system schematic to simplify system conﬁguration. This unique technique automatically conﬁgures ports and

devices while providing a schematic representation of the overall system.

With the VMX210 Video Management System, you have the option of using one of three dedicated workstations. Each workstation includes a

keyboard and mouse, a video capture card, and pre-installed VMX200 software.

The VMX210-SYS-1 model uses two monitors. The left monitor shows a graphical map and the right monitor shows the camera video.

VMX210-SYS-Q model also uses two monitors with the VMX map on the left monitor and the video from cameras displayed on the right monitor.

You have full vision and control of a surveillance area with the two monitors mounted next to each other.

The following features are found on the VMX210:

• Visual interface for control of switchers, multiplexers, and other devices

• Simple and intuitive system control

• Drag and drop camera selection from maps to display monitors

• No more camera and monitor keyboard codes to remember

• On-screen, mouse-controlled PTZ functions

• Importation of maps directly from graphic programs

• Hierarchical linking of sets of maps (for example, buildings, ﬂoors, rooms)

• Automatic conﬁguration of data ports and video buses

• Simpliﬁcation of equipment integration, system growth, and modiﬁcations

• Easy deﬁnition, saving, and use of presets, sequences, and macros

• Automatic activation of presets, sequences, and macros in response to alarms

• Manual or automatic image capture

MODELS

VMX210-SYS-1 Workstation to support a graphical map on one monitor and video on a second monitor (monitors not

supplied)

VMX210-SYS-Q Workstation to support a graphical map on one monitor and four interactive video displays on a second

monitor (monitors not supplied)

8 C1532M (1/06)

OVERVIEW

Figure 1 shows how equipment can be linked together on the VMX210 Video Management System. This illustration is only an example. There are

many ways you can link equipment together in this system.

NOTE:

Each VMX210 workstation has four standard COM ports. Expansion is possible via the USB port.

Figure 1.

System Overview

DATA

VIDEO

VMX210-SYS-Q

DVR

MATRIX

SWITCHER

VCR

MULTIPLEXER

MONITOR WALL

C1532M (1/06) 9

FRONT VIEW

Refer to Figure 2 to get familiarized with the front of the VMX210 workstation. The front of the unit has a door

that can be opened or locked using one of the supplied keys.

Figure 2.

VMX210 Front View



POWER LED



HDD (HARD DISK DRIVE) LED



KEY LOCK (2 KEYS SUPPLIED)



FAN VENTILATION



HANDLE (2)



RACK EAR (2)



FAN



POWER BUTTON



DVD/CD-ROM DRIVE



3.5-INCH FLOPPY DRIVE



  











10 C1532M (1/06)

REAR VIEW

In Figure 3 the rear panel of the VMX210-SYS-Q workstation is used to identify the components that are common to all models.



POWER



COM 2 (RS-232)



MOUSE AND KEYBOARD PORTS (PS/2)



PRIMARY ETHERNET PORT (Not used)



SECONDARY ETHERNET PORT (Not used)



AUDIO PORTS



USB PORTS



COM 3 and COM 4 (RS-422)



COM 1 (RS-232)



MODEM PORTS (Not used)



PARALLEL PORT*



USB PORTS

*Refer to the Windows XP (or higher) documentation for printer installation instructions

Figure 3.

VMX210 Rear View

NOTE:

A USB port expander can be used with the VMX210 workstation to increase the total number of USB ports and serial communication

ports (RS-232).



   



 

C1532M (1/06) 11

Installation

The following items are supplied:

1 VMX210 workstation

1 Mouse

1 Keyboard

1 VGA adapter

1 RCA-to-BNC video input adapter (VMX210-SYS-1)

1 Spider video input cable (VMX210-SYS-Q)

1 Y VGA monitor cable (VMX210-SYS-Q)

2 Power cords (1 USA standard and 1 European standard)

2 Keys

2 Rack ears

4 Screws, 10-32 x 0.750-inch, Phillips, pan head with washer

2 Brackets

6 Screws, 8-32 x 0.250-inch, pan head

2 Front mounting rails

6 Screws, 8-32 x 0.375-inch, pan head with washers

4 Screws, 10-32 x 0.375-inch, ﬂat head

2 Rear mounting rails

8 Screws, 10-32 x 0.375-inch, ﬂat head

1 VMX210 Resource CD

Two VGA or SVGA monitors are required for the VMX210-SYS-1 and VMX210-SYS-Q.

12 C1532M (1/06)

INSTALLATION OF SUPPORT RAILS

1. Attach the rack ears to the front sides of the VMX210 with the 10-32 x 0.250-inch screws.

2. Attach the brackets to the sides of the equipment with the 8-32 x 0.250-inch screws.

3. Fasten the front and rear support rails together with the 8-32 x 0.375-inch screws with lock washers.

4. Attach the support rails to the equipment rack with the 10-32 x 0.375 inch screws.

5. Slide the brackets on the equipment onto the support rails.

6. Fasten the rack ears to the equipment rack with the 10-32 x 0.750-inch screws and washers.

Figure 4.

Rack Mount Installation

VMX210

(4) SCREWS,

10-32 X 0.750-INCH

PHILLIPS, PAN HEAD

WITH WASHERS

SLOTTED HOLES

TOWARDS FRONT

OF UNIT

TAPERED ENDS

TOWARDS REAR

OF UNIT

(6) SCREWS, 8-32 X 0.250-INCH

PAN HEAD (3 EACH SIDE)

BRACKET

(SIDE VIEW)

(4) SCREWS,

10-32 X 0.375-INCH

FLAT HEAD

(6) SCREWS,

8-32 X 0.375-INCH,

PAN HEAD WITH

WASHERS

(8) SCREWS,

10-32 X 0.375-INCH,

FLAT HEAD

SUPPORT RAILS

RACK

C1532M (1/06) 13

CONNECTIONS

MOUSE AND KEYBOARD

Connect the mouse and keyboard to the workstation.

Figure 5.

Mouse and Keyboard Connections

14 C1532M (1/06)

MONITOR OUTPUTS

DUAL-MONITOR SYSTEMS

1. Connect the VGA adapter to the digital video interface (DVI) connector on the rear panel.

Figure 6.

Monitor Port Adapter Connection

2. Connect monitors to the workstation, as shown below. To connect monitors to a VMX210-SYS-1, use the monitor cables provided with your

monitors (user-supplied). To connect monitors to a VMX210-SYS-Q, use the Y cable provided with the VMX210-SYS-Q workstation.

NOTE:

The left monitor must be connected to the bottom input, and the right monitor must be connected to the top input.

Figure 7.

How to Connect Monitors to a

VMX210-SYS-1

Figure 8.

How to Connect Monitors to a

VMX210-SYS-Q

LEFT VGA

MONITOR

RIGHT VGA

MONITOR

LEFT VGA

MONITOR

RIGHT VGA

MONITOR

C1532M (1/06) 15

VIDEO INPUTS

The VMX210-SYS-1 has one video input. Follow these steps to connect the video:

1. Connect the RCA-to-BNC video input adapter to the video port on the rear panel.

2. Connect a BNC video cable (user-supplied) to the input adapter.

3. Connect the video source, such as a camera or VCR, to the BNC cable.

Figure 9.

How to Connect Analog Video to the VMX210-SYS-1

To connect video inputs to the VMX210-SYS-Q,

1. Connect the “spider” video input cable to the video port on the VMX210-SYS-Q rear panel.

2. Connect the video input cable to the video source (for example, a camera or the monitor output of a switcher or a multiplexer).

The spider cable contains four input connectors, coded by color. Use the BNC connectors as follows:

• Input 1 (Red)

• Input 2 (Green)

• Input 3 (Blue)

• Input 4 (Black)

NOTE:

Refer to the appropriate installation manual for each video input device for additional instructions.

Figure 10.

How to Connect Analog Video to the VMX210-SYS-Q

INPUT

COLOR

RED

GREEN

BLUE

BLACK

SPIDER

CABLE

16 C1532M (1/06)

SPECTRA/ESPRIT CONTROL CONNECTIONS

If you connected a Spectra or Esprit camera positioning system directly to a video input port on the VMX210 workstation, you must also connect

a data cable to the VMX210 workstation to provide direct camera control from the VMX210.

1. Use one of the COM ports on the VMX210 workstation for the control connection. Using an RS-422 COM port requires a wall block between

the VMX210 and the camera. If you use an RS-232 COM port, you will need an RS-232 to RS-422 converter (user-supplied) and power

supply.

Use twisted pair wire to connect the Spectra or Esprit receivers to the COM port or the converter. You can daisy-chain (connect a series of

cameras) from the Rx+ and Rx- connections on the ﬁrst Spectra or Esprit to additional units.

Figure 11.

Spectra/Esprit Control Connections

2. After you make the connections, open the Device Conﬁguration window in the VMX200 software and add the receiver to your system.

Make sure you specify the following:

• Specify that the commands are sent via PC serial control port.

• Specify the D-Protocol driver.

• Select either "automatic" or "manual" camera addressing.

Refer to the VMX200 Software Installation/Operation Manual for detailed instructions on system conﬁguration.

The receiver's settings must match the VMX210 COM port settings. Refer to the Spectra/Esprit Installation/Operation Manuals for instructions

on setting baud rate, parity, and other settings.

VMX210

RS-422

PIN 2 = Rx+

PIN 3 = Tx-

PIN 7 = Tx+

PIN 8 = Rx-

PIN 1 = Tx+

PIN 2 = Tx-

PIN 7 = Rx-

PIN 8 = Rx+

SPECTRA

ESPRIT

TO RECEIVERS

WALL

BLOCK

WALL BLOCK

PIN ASSIGNMENTS

VMX210 COM 3 & 4

RS-422 PIN ASSIGNMENTS

C1532M (1/06) 17

CM6800 CONTROL CONNECTIONS

There are two ways you can connect a CM6800 to a VMX210.

1. Connect a null modem cable from VMX210 COM 1 or COM 2 to the CM6800 COM 1 port.

2. Connect a DB9 cable from VMX210 COM 1 or COM 2 to the CM6800 ASCII Ports 2, 7, or 8. You must use a wall block to convert the DB9

connector to an RJ-45 connector.

Figure 12.

CM6800 Control Connections

Although a CM6800-48X8 is pictured above, you can use a CM6800-32X6 as long as the COM port number of the port connection is the same.

(COM ports 7 and 8 are not available on the CM6800-32X6.)

If you connect to ports 7 or 8, you must set the port for ASCII RS-232 using the CM6800 programming menus or manager program.

After you make the connections, open the Device Conﬁguration window in the VMX200 software and add the CM6800 to your system. Refer to

the VMX200 Software Installation/Operation Manual for detailed instructions on system conﬁguration.

The CM6800 settings must match the VMX210 COM port settings. Refer to the CM6800 Installation/Operation Manual for instructions on setting

baud rate, parity, and other settings.

120/230~

50/60 HZ

25 WATTS

12345678

CONTROL

010101

VMX210 CM6800E-48X8

CM6800E-48X8 COM 7

RJ-45 WALL BLOCK

AND STRAIGHT CABLE

SUPPLIED WITH CM6800

MODIFIED NULL MODEM

CABLE (USER-SUPPLIED)

NULL MODEM CABLE

VMX210

18 C1532M (1/06)

CM6700 CONTROL CONNECTIONS

Follow these steps and refer to Figure 10:

1. Connect a DB9 cable from VMX210 COM 1 or COM 2 to the screw terminal connector on the CM6700. Note the pin-outs on the wiring.

2. Remove the cover from the CM6700-MXB and set the SW5 DIP switch to RS-232 mode. Replace the cover when done.

After you make the connections, open the Device Conﬁguration window in the VMX200 software and add the CM6700 to your system. Refer to

the VMX200 Software Installation/Operation Manual for detailed instructions on system conﬁguration.

The CM6700 settings must match the VMX210 COM port settings. Refer to the CM6700 Installation/Operation Manual for instructions on setting

baud rate, parity, and other settings.

Figure 13.

CM6700 Control Connections

13579

246810

12 14

13 15

VIDEO INPUTS

VIDEO OUTPUTS

ALARMS

(1-9)

ALARMS

(10-18)

COM 1 (1-6)

COM 2 (7-12)

CONTROL

OUTPUTS

REMOTE KEYBOARD(S)

LOCAL

KEYBOARD

123456789

1213 14 15 16 17 18

12345678910

0123

TT RR

+ +

12345678

RS-422/485

ON OFF

KEY

RS-232

SW5 DIP SWITCH SETTINGS

14 15 1617 18

RS-232

CM6700

NOTE: TO PROPERLY SHIELD DATA CABLE

CONNECT GROUND ON ONE END ONLY.

SET DIP SWITCH

(SW5) ON

CM6700-MXB

TO RS-232 MODE

VMX210 COM

PORT SETTINGS

BAUD RATE: 9600

DATA BITS: 8

STOP BITS: 1

PARITY: NONE

FLOW CONTROL: NONE

VMX210

COM 1 OR CM6700-MXB

COM 2 COM 2

2 RX …….……………… 7 TX

3 TX…………………… 12 RX

5 GND…………………9 GND

C1532M (1/06) 19

CM9700 CONTROL CONNECTIONS

The following connection instructions apply to CM9700 matrix systems that use CC1 software version 9.xx or higher and that use the Pelco P

keyboard protocol in the VMX210 device conﬁguration. Note that “CM9700” or a reference to a “CM9700 system” includes the CM9740, CM9760,

CM9770, and CM9780 matrix systems.

NOTE:

If you are using CC1 software version 8.03.012 or lower, the parameters of the CM9700-MGR software allow some variations in the COM

port connections and settings. Refer to the following

Alternate CM9700 Connection

section for an alternate connection option.

1. Use a modiﬁed null modem cable (user-supplied) with a DB9 connector at one end. Cut the other end to expose the individual wires, so that

they can be connected directly to the wall block.

2. Connect the DB9 end of the cable to one of the RS-422 COM ports (COM 3 or 4) on the VMX210.

3. Connect the wires exposed at the other end of the cable to the wall block.

4. Using an RS-422 reversed data cable, connect the wall block to the CM9700-CC1. You can use any available RS-422 COM port on the

CM9700-CC1.

Remember that the ﬁrst few RS-422 COM ports on the CM9700-CC1 must be used for one or more matrix bays and any network interface

units and hot switch units. For further guidance on COM port assignments, refer to the matrix system port assignment table and the

RS-422

COM Port (SERCOM) Connections

section in the matrix system manual.

Figure 14.

CM9700 RS-422 Connections

5. After you ﬁnish installing system hardware, open the Device Conﬁguration window in the VMX200 software and add the CM97XX to your

system. Refer to the VMX200 Software Installation/Operation Manual for detailed instructions on system conﬁguration.

6. The CM97XX settings must match the VMX210 COM port settings. Refer to the CM9700 Series Installation/Operation Manuals for

instructions on setting baud rate, parity, and other settings.

PRINTER COM1 COM2

VMX210

RS-422 REVERSED CABLE

CM9700-CC1

RS-422

CHANGE COM PORT

TO 4800 BAUD,

EVEN PARITY

WALL

BLOCK

PIN 1

PIN 8

COM PORT

PROGRAMMED

FOR KEYBOARD

CM9700-CC1

RJ45 PIN ASSIGNMENTS

PIN 1 = TX+

PIN 2 = TX-

PIN 7 = RX-

PIN 8 = RX+

20 C1532M (1/06)

Alternate CM9700 Connection (RS-232 Ports)

If you are using the CM9700-MGR software to control your CM9700 system, you can use the RS-232 COM port on the CC1 for the VMX210

connection. This method does not allow complete control of cameras connected serially to the CM9700-CC1 (including presets). This method is

recommended only for situations where the Virtual Keyboad Method is not possible.

Complete the following steps to connect the VMX210 to the CC1:

1. Using a null modem cable (user-supplied), plug one end into one of the RS-232 ports (COM 1 or COM 2) on the VMX210.

2. Plug the other end of the cable into the RS-232 COM 2 port on the CC1.

Figure 15.

CM9700 RS-232 Connections

3. After you ﬁnish installing system hardware, complete the following conﬁguration steps.

a. Open the Device Conﬁguration window in the VMX200 software and add the CM97XX (ASCII Protocol) to your system. Refer to the

VMX200 Software Installation/Operation Manual for detailed instructions on system conﬁguration.

b. In the CM9700-MGR software, change the CC1 RS-232 COM 2 settings to match the VMX210 RS-232 COM port settings: 9600 baud,

no parity, 8 data bits, 1 stop bit. You will need to designate the port as an internal data translator.

PRINTER COM1 COM2

CM9740-CC1

VMX210

CM9700-CC1

CM9740-CC1

CM9700-CC1

NULL MODEM CABLE

COM1 COM2 PRINTER LPT1 VGA

Page is loading ...

Pelco VMX210-SYS Series Video Management System Installation guide

Pelco VMX210-SYS Series Video Management System Installation guide

Pelco VMX210-SYS Series Video Management System Installation guide

Related papers

Other documents