SEI ST PIERRE BAKERS RACK KA076300TX Assembly Instructions Manual

For assistance with assembly contact:

Southern Enterprises Inc.

Customer Service 1-800-633-5096

service@seidal.com

www.seidal.com

KA076300TX

“ST PIERRE” BAKERS RACK

Assembly Instructions

A Upper Back Frame Quantity

of 1

B Bottom back Frame Quantity

of 1

C. Left Metal cross bar Quantity

of 2

D. Right Metal cross bar Quantity

of 2

E. Wire shelf Quantity

of 1

F.

Bottom Frame

Quantity

of 1

G．

．．

．Leg

Quantity

of 2

H．Left side arm Quantity

of 1

J．

．．

．Right side arm Quantity

of 1

K．

．．

．Large wood panel Quantity

of 1

28”*15-3/8”

Care and Cleaning Instructions:

Before using , wipe with a clean , dry cloth. Avoid

rubbing or scratching the surface with rough or

abrasive objects.

For replacement parts or questions, please

Call Customer Service at 1-800-633-5096

Do not return product to store, please call

Manufacturer for assistance, questions or Parts.

Assembly Tool Required

No.2 Phillips Screwdriver (Not Included)

“

ST PIERRE

”

BAKERS RACK

Parts List

Please review all parts and hardware before disposing of any packaging. Call Customer

Service if missing hardware. Do not return to store/retailer. crews shown in actual size. Using

a screw that is too long will cause damage. Before beginning assembly, separate each type of

screw. Carefully study the screw diagrams below .You may receive extra hardware with your

unit.

L. Middle wood panel Quantity

of 1

26” * 10”

M. Small wood panel Quantity

of 1

26.25”*6-7/8”

N. Wicker basket Quantity

of 2

O. Wicker bottom panel Quantity

of 2

1.Long Bolt Quantity

of 8

1/4” X 1-1/2”

2.

Short Bolt

Quantity

of 10

1/4” X 1/2”

3．

．．

．Wood screw Quantity

of 10

4．

．．

．Allen Wrench Quantity

of 1

Care and Cleaning Instructions:

Before using , wipe with a clean , dry cloth. Avoid

rubbing or scratching the surface with rough or

abrasive objects.

For replacement parts or questions, please

Call Customer Service at 1-800-633-5096

Do not return product to store, please call

Manufacturer for assistance, questions or Parts.

Assembly Tool Required

No.2 Phillips Screwdriver (Not Included)

“

ST PIERRE

”

BAKERS RACK

Parts List

Please review all parts and hardware before disposing of any packaging. Call Customer

Service if missing hardware. Do not return to store/retailer. Screws shown in actual size.

Using a screw that is too long will cause damage. Before beginning assembly, separate each

type of screw. Carefully study the screw diagrams below. You may receive extra hardware

with your unit.

Figure 1

Assembly Instructions:

Unpack and lay parts on clean,

padded surface like carpet or

blanket. Check that you have all

parts indicated on the front page

.

Insert 4pcs long bolt (1) through

holes on Bottom back frame (B) to

attach 4pcs Metal Cross bar

(C&D).

Insert 4pcs Short bolt (2) through

holes on Metal Cross bars (C&D)

to attach 2pcs Legs(G).

Insert 2pcs Short bolt (2) through

holes on Bottom Frame (F) to

attach 2pcs Legs(G)

Insert 2pcs Short bolt (2) through

holes on Wire shelf (E) to attach

2pcs Legs(G).

Figure 2

Please insert Upper back panel(A)

onto bottom back panel(B) and

then Insert 2pcs Short bolt (2)

through holes on back Frame(A)

to attach bottom back Frame(B).

Put the Large wood panel (K) onto

the Upper back Frame(A) &

Legs(G) and then insert 2pcs

wood screw(3) through holes on

back Frame(A) to attach Large

wood panel(K)

“

ST PIERRE

”

BAKERS RACK

Assembly Instructions

Figure 3

Insert 2pcs long bolt (1) through

holes on Upper Back Frame (A) to

attach the 2pcs Side arm (H & J)

by tightening the Long Bolt(1).

Then Insert 2pcs Long Bolt (1)

through holes on Legs (G) & Wood

panel (K) to attach the 2pcs Side

arm (H & J).

Figure 4

Put the Small wood panel(M) onto

the Upper back Frame(A) & Side

arms (H & J) and insert 4pcs wood

screw(3) through holes on back

Frame(A) & Side arms (H & J) to

attach small wood panel(M)

The same way to attach the

Middle wood panel(L) onto the

back Frame(A) & Side shelf(H & J)

“

ST PIERRE

”

BAKERS RACK

Assembly Instructions

Figure 5

Please put Basket Bottom Panels

(O) into Wicker Baskets (N) by

hands.

Figure 6

Then put the finished baskets

onto Bottom Frame(F).

“

ST PIERRE

”

BAKERS RACK

Assembly Instructions

Please immediately examine this product carefully. Any request for missing parts or damage replacement must

be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this

time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying

product(s) and we are not responsible for any damages due to product modification(s).

If damages or missing

parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement

merchandise.

Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central

time if you have product issues or email us at service@seidal.com. Please ask for customer service

representative for issues involving damages or replacement parts. Please ask for technical assistance

representative for any issues with product and assembly/construction.

Please contact the retailer that you purchased from for returns.

Customer Information

Name

Address

City/State/Zip Code

Phone Number

Please indicate where you purchased this item: Store/Website/Catalog

Please indicate color/size/style number:

Style No Parts Letter Parts Description Quantity Needed

Parts Replacement Form

Customer Service 1-800-633-5096

service@seidal.com

Southern Enterprises, Inc.

600 Freeport Parkway, Suite 200

Coppell, Texas 75019

SEI ST PIERRE BAKERS RACK KA076300TX Assembly Instructions Manual

SEI ST PIERRE BAKERS RACK KA076300TX Assembly Instructions Manual

Related papers

Other documents