Init NT-WG1144 Assembly Instructions Manual

Brand: Init

Model: NT-WG1144

Type: Assembly Instructions Manual

ASSEMBLY

INSTRUCTIONS

NT-WG1144

Wood and Glass TV Stand

Safety information and

specifications...........................................2

Tools needed ...........................................3

Parts ............................................................3

Hardware...................................................4

Assembly instructions ..........................5

Before using your new product, please read these instructions to prevent any damage.

NT-WG1144_13-0328_MAN_V4_ENG.fm Page 1 Wednesday, May 8, 2013 9:07 AM

Still need help? Call 800-573-2860

Safety information and specifications

CAUTION: This stand’s glass work surface

is intended only for use with a product not

weighing more than 135 lbs. (61.2 kg) and

having a width that will permit it to sit

evenly on the stand with no more than a one-inch

overhang on each side on the top shelf. Using with

other products, including products that weigh more

than the maximum weight allowed or extend

beyond the maximum width, may result in instability,

which may cause possible injury.

Caution: This product contains small items that

could be a choking hazard if swallowed.

Keep these items away from young children!

Do not use the glass shelves to lift the stand. See

instructions for more details.

Model #: NT-WG1144

Distributed by Best Buy Purchasing, LLC

Manufacturer: Whalen Furniture Mfg. Inc.

Manufacture Date:

Maximum weight: 135 lbs. (61.2 kg)

Maximum width: 1-inch overhang on each side

of the top shelf

Overall dimensions (W × H × D):

44 × 24.25 × 20" (111.8 × 61.6 × 50.8 cm)

Top shelf (W × D):

44 × 15" (111.8 × 38.1 cm)

Middle shelf (W × H × D):

34.88 × 9.39 × 16" (88.6 × 23.8 × 40.6 cm)

Bottom shelf (W × H × D):

34.88 × 9.5 × 18.5" (88.6 × 24.1 × 47 cm)

44" (111.8 cm)

15" (38.1 cm)

24.25" (61.6 cm)

18.5" (47 cm)

NT-WG1144_13-0328_MAN_V4_ENG.fm Page 2 Wednesday, May 8, 2013 9:07 AM

Still need help? Call 800-573-2860

Parts

Package contents: parts

Note: You may receive extra hardware.

Tools needed

DrillNo. 2 Phillips screwdriver

A Top shelf frame (1)

B Middle shelf frame (1)

C Bottom shelf frame (1)

D Rear support (1)

E Left leg (1)

F Right leg (1)

G Top shelf (1)

H Middle shelf (1)

I Bottom shelf (1)

NT-WG1144_13-0328_MAN_V4_ENG.fm Page 3 Wednesday, May 8, 2013 9:07 AM

Still need help? Call 800-573-2860

Hardwa re

Package contents: hardware

Make sure you have all the hardware necessary to assemble your new TV stand:

Video Instruction Guides: Go to http://init.showuhow.com to view step-by-step instructional

videos for assembling and installing your product. Enter the following product number on the

ShowUhow homepage - INTANY00004.

http://init.showuhow.com/VIGS/INTANY00004/tabid/5924/language/en-US/Default.aspx

Label Hardware Qty.

L19

M24

P26

Left bracket

Right bracket

Suction cup

3/4" bolt

(19.05 mm)

1-1/4" bolt

(31.75 mm)

Lock washer

*A non-toxic touch-up pen has been

provided to repair any small nicks or

scratches that may occur during shipping

or assembly.

Label Hardware Qty.

Q26

Flat washer

Cable clip

Allen (hex)

wrench 4 mm

(0.158")

Touch-up pen*

Tipping

restraint

hardware

kit

1 0 20 30 40 50 60 70 80 90 100mm

1234in

NT-WG1144_13-0328_MAN_V4_ENG.fm Page 4 Wednesday, May 8, 2013 9:07 AM

Still need help? Call 800-573-2860

Assembly instructions

Step 1 Attach the shelf frames (A, B, C) to the rear support (D). Make sure the inside corner plates on the shelf

frames will face up after assembly.

You’ll need:

Corner

plates

M (8) N (2)

S (1)P (10)

Q (10)

NT-WG1144_13-0328_MAN_V4_ENG.fm Page 5 Wednesday, May 8, 2013 9:07 AM

Still need help? Call 800-573-2860

Step 2 Attach the left and right legs (E, F) to the shelf frames. Make sure that the tops are flush with the wood front

rail on the top shelf frame (A).

You’ll need:

M (6) N (4) S (1)P (10) Q (10)

NT-WG1144_13-0328_MAN_V4_ENG.fm Page 6 Wednesday, May 8, 2013 9:07 AM

Still need help? Call 800-573-2860

Step 3 Attach the left and right brackets (J, K) to connect the middle rails of the top shelf frame (A) with the rear

support (D).

You’ll need:

J (1) K (1) P (6) S (1)M (6) Q (6)

NT-WG1144_13-0328_MAN_V4_ENG.fm Page 7 Wednesday, May 8, 2013 9:07 AM

Still need help? Call 800-573-2860

Step 4 Attach the cable clips (R) onto the rear support (D).

TIP: You can use these cable clips to help keep your entertainment center’s cables organized.

You’ll need:

M (4) R (2) S (1)

NT-WG1144_13-0328_MAN_V4_ENG.fm Page 8 Wednesday, May 8, 2013 9:07 AM

Still need help? Call 800-573-2860

Step 5 Adjust the floor levelers on the bottom of both legs to level the TV stand.

Note: The floor levelers are

pre-attached on the bottom of

each leg.

NT-WG1144_13-0328_MAN_V4_ENG.fm Page 9 Wednesday, May 8, 2013 9:07 AM

Still need help? Call 800-573-2860

Step 6 Attach the suction cups (L) firmly into the top holes and inside corner plates on the shelf frames (A, B, C).

Install the glass shelves (G, H, I) with the black side of the glass down.

Tip: If a suction cup resists insertion, try pressing down on the middle of the cup with the hex wrench

while twisting it clockwise into the hole, as if you were screwing it in.

You’ll need:

L (19)

NT-WG1144_13-0328_MAN_V4_ENG.fm Page 10 Wednesday, May 8, 2013 9:07 AM

Still need help? Call 800-573-2860

Step 7Position the assembled stand against a wall where you plan to use it, then follow the instructions printed on

the bag containing the tipping restraint hardware kit (

U) to attach the restraint hardware to the wall and the stand.

Note: You need a 3/8" drill bit to drill the hole for the wall anchor. The hole should be 1 1/2" deep.

For customer service, call: 877-573-2860 (U.S./Canada markets)

You’ll need:

U (1)

Phillips screwdriver

Drill

NT-WG1144_13-0328_MAN_V4_ENG.fm Page 11 Wednesday, May 8, 2013 9:07 AM

www.initproducts.com

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave. South, Richfield, MN 55423 U.S.A.

Init is a trademark of BBY Solutions, Inc. Registered in some countries.

All other products and brand names are trademarks of their respective owners.

V4 ENGLISH

13-0328

NT-WG1144_13-0328_MAN_V4_ENG.fm Page 12 Wednesday, May 8, 2013 9:07 AM

Init NT-WG1144 Assembly Instructions Manual

Init NT-WG1144 Assembly Instructions Manual

Init NT-WG1144 Assembly Instructions Manual

Related papers

Other documents