QCast - QP01
Video Streaming Dongle
User Guide
사용 설명서
คู่มือผู้ใช
้
i English
Copyright
© 2016 BenQ Corporation. All rights reserved. No part of this
publication may be reproduced, transmitted, transcribed, stored in a
retrieval system or translated into any language or computer language,
in any form or by any means, electronic, mechanical, magnetic, optical,
chemical, manual or otherwise, without the prior written permission
of BenQ Corporation.
All other logos, products, or company names mentioned in this
document may be the registered trademarks or copyrights of their
respective companies, and are used for informational purposes only.
Disclaimer
BenQ Corporation makes no representations or warranties, either
expressed or implied, with respect to the contents hereof and
specically disclaims any warranties, merchantability or tness for any
particular purpose. Further, BenQ Corporation reserves the right to
revise this publication and to make changes from time to time in the
contents hereof without obligation of BenQ Corporation to notify
any person of such revision or changes.
Screen images and icons in this manual are simulated for illustrative
purposes only. Actual displays may vary.
BenQ is not responsible for the content of the websites or of similar
resources, which are maintained and controlled by third parties, that
may be linked from this product. Providing links to those websites or
to similar resources does not mean that BenQ makes any warranty
or representation to their content by expression or by implication.
Any third party content or service preinstalled in this product is
provided “as is”. BenQ does not, by expression or by implication,
make any warrant to the content or to the services provided by third
parties. BenQ does not warrant or guarantee that the content or
services provided by third parties are accurate, effective, most up-to-
date, legal, or complete. Under no circumstances shall BenQ be liable
for the content or services provided by third parties including their
negligence.
Services provided by third parties may be terminated temporarily or
permanently. BenQ does not warrant or guarantee that the content
or services provided by third parties are in good condition at any
time, and is not liable for the termination of the said content and
services.
In addition, BenQ is not involved in any transactions you conduct in
the websites or similar resources maintained by third parties.
You should contact the content or service providers for any ques-
tions, concerns, or disputes.
iiEnglish
Table of Contents
Copyright ...............................................................................i
Disclaimer .............................................................................. i
Introduction ..........................................................................1
Package contents ..................................................................2
Product overview .................................................................2
Installation tips ...................................................................... 2
Connecting the dongle to your projector ......................3
Connection via MHL port ...........................................................3
Connection via HDMI port (for a display with a USB
type A port) .................................................................................... 4
Connection via HDMI port (for a display without a USB
type A port) .................................................................................... 5
Installing BenQ QCast on your mobile device/
computer ...............................................................................6
Installation on an Android device (with NFC function) .......6
Installation on an iOS or Android device
(without NFC function) ...............................................................7
Installation on a Windows or Mac OS device ........................7
Working with BenQ QCast............................................8
Working with other DLNA software .............................. 8
Regulatory Statements ........................................................9
1 English
Introduction
Thank you for choosing BenQ Video Streaming dongle -
QCast, which works with the BenQ QCast software (in-
stalled on your mobile device or computer) and enhances
video and music playback, document review, web surng,
and live video streaming. You are provided with quick wire-
less connection and projection via NFC without any text in-
put. And then you can mirror the content from your mobile
device to a display wirelessly as it supports Miracast.
The dongle can be connected to any display such as projec-
tor, LCD monitor, or TV, as long as supported I/O ports are
available. In this document, connection with a projector is
used as an example. The installation and operation may vary
by the connected devices.
For more information, visit QCast.BenQ.com.
2English
Package contents
• QCast dongle x 1 • HDMI cable x 1
• USB cable x 1 • NFC chip sticker x 1
(Keep away from heat and
metal. Do not bend/fold.)
• User guide x 1
• NFC instruction card x
1
Product overview
LED indicator
USB port
(for power supply)
MHL / HDMI connector
Switcher
Installation tips
To get started, you need to install the dongle and the appro-
priate app rst.
1. Connect the dongle to your projector.
2. Install the BenQ QCast app/software to your device
(i.e, the media source), and connect the device with the
dongle wirelessly.
With the wireless connection between your device and the
dongle, you can mirror the content from your device to the
projector.
Depending on your device’s operating system, different
installation procedures and setup are required. Read this
document and on-screen instructions (if provided) carefully.
3 English
Connecting the dongle to your
projector
The dongle can be activated via either the MHL or HDMI
port on your projector.
Make sure the projector is powered on before making the
connection.
Connection via MHL port
MHL
MHL
USB
1
2
1. Slide the switcher on the dongle to MHL.
2. Connect the dongle to the MHL port of your projector.
The dongle is then activated and the LED indicator lights
up in solid blue.
To power up the dongle, the power supplied from the con-
nected MHL port must be no less than 900mA.
4English
Connection via HDMI port (for a display
with a USB type A port)
2
3
4
HDMI
MHL
USB
1
1. Slide the switcher on the dongle to USB.
2. Connect the dongle to the HDMI port of your projector.
3. Connect one end of the supplied USB cable to the USB
port of the dongle.
4. Connect the other end of the USB cable to the USB type
A port of your projector. The dongle is then activated and
the LED indicator lights up in solid blue.
To power up the dongle, the DC power supplied from the
connected USB type A port must be no less than 5V/1A.
5 English
Connection via HDMI port (for a display
without a USB type A port)
2
3
4
5
HDMI
MHL
USB
1
1. Slide the switcher on the dongle to USB.
2. Connect the dongle to the HDMI port of your projector.
3. Connect one end of the supplied USB cable to the USB
port of the dongle.
4. Connect the other end of the USB cable to the USB type
A port of an adapter (purchased separately).
5. Connect the adapter to a power outlet. The dongle is
then activated and the LED indicator lights up in solid
blue.
To power up the dongle, the DC power supplied from the
connected USB type A port must be no less than 5V/1A.
6English
Installing BenQ QCast on your
mobile device/computer
Once the dongle has been connected to your projector
successfully, you are requested to download and install an
app/software named BenQ QCast to your mobile device/
computer. The dongle needs to work with BenQ QCast
to perform wireless media streaming.
Installation on an Android device (with NFC
function)
NFC function is only available and supported for Android
4.2 / 4.3 / 4.4.2 / 5.0 / 5.1 / 6.0.
1. Make sure your device is connected to the Internet and is
NFC-enabled.
2. Make sure the dongle is connected to the projector.
3. Read the instruction card that came with the provided
NFC chip sticker. You are recommended to stick the
sticker on the instruction card.
4. Tap your mobile device to the NFC chip sticker to install
the BenQ QCast app from Google Play and establish
the wireless connection automatically.
5. Tap your mobile device to the NFC chip sticker again to
launch the app.
• Do not stick the NFC chip sticker on the dongle.
• Do not peel the NFC chip sticker off once it’s stuck.
7 English
Installation on an iOS or Android device
(without NFC function)
Available for iOS 8 / 9 and Android 4.2 / 4.3 / 4.4.2 / 5.0 /
5.1 / 6.0.
1. Make sure your device is connected to the Internet.
2. Make sure the dongle is connected to the projector.
3. Search for BenQ QCast in the online application store
and install it.
4. Search for the dongle’s SSID (displayed as BenQ_
xxxxxxxx) and connect. If you are requested to enter
a password, check it on the upper-right corner of the
BenQ QCast screen.
5. Tap the app icon to launch it.
Installation on a Windows or Mac OS device
Available for Windows 7 / 8 / 8.1, and Mac OS 10.8 / 10.9 /
10.10.
1. Make sure your device is connected to the Internet.
2. Make sure the dongle is connected to the projector.
3. Download the BenQ QCast software from
QCast.BenQ.com.
4. Search for the dongle’s SSID (displayed as BenQ_
xxxxxxxx) and connect. If you are requested to enter
a password, check it on the upper-right corner of the
BenQ QCast screen.
5. Click the BenQ QCast icon on the desktop to launch it.
System requirements
OS Specications
Windows OS version Windows 7 / 8 / 8.1
CPU Dual Core 2 GHz or higher
ATOM is not supported.
Graphic card 64MB VRAM or above
WiFi 802.11n (2T2R recommended)
8English
OS Specications
Mac OS OS version Mac OS 10.8 / 10.9 / 10.10
CPU Dual Core Intel Core i 1.4 GHz
or higher
PowerPC is not supported.
Graphic card 64MB VRAM or above
Working with BenQ QCast
Once BenQ QCast has been installed and launched suc-
cessfully, you are ready to perform wireless media stream-
ing and enjoy the wireless projection. Simply tap Mirror or
EZMirror from BenQ QCast and follow the on-screen
instructions.
• If the device has been connected to a wireless AP, you can
screencast the web content and the les stored on your
mobile device.
• If the device is not connected to a wireless AP, you can
screencast the les stored on your mobile device only.
Functions that are not available will be grayed out.
Working with other DLNA software
The dongle can work with other DLNA-supported devices
and turn your display / projector a DLNA-compatible player.
To do so, you need to install an appropriate DLNA software
on your device rst.
Follow the on-screen instructions as the operation may
9 English
vary by software.
Regulatory Statements
Note: Not all models are available in all regions. If certain safety regu-
lations are required for specic region, BenQ ensures that products
available in that region are complied with the requested regulations.
FCC statement (for the United States only)
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate this equipment.
RoHS Statement
This product is compliant to implemented RoHS (Restriction of
Hazardous Substances ) type regulations worldwide, including but not
limited to China, India, Japan, Korea and European Union.
IC statement (for Canadian users)
This Class B digital apparatus complies with Canadian ICES-3 (B).
Cet appareil numérique de la classe A est conforme à la norme NMB-
3(B) du Canada.
The device complies with RSS-210 of the Industry Canada Rules.
Operation is subject to the following two conditions (If the product
within RF function):
1) this device may not cause interference and
2) this device must accept any interference, including interference that
may cause undesired operation of the device.
10English
Ce dispositif est conforme a la norme CNR-210 d’Industrie Canada
applicable aux appareils radio exempts de licence. Son fonctionnement
est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas
produire de brouillage prejudiciable, et (2) ce dispositif doit accepter
tout brouillage recu, y compris un brouillage susceptible de provoquer
un fonctionnement indesirable.
DECLARATION OF CONFORMITY
The device complies with the requirements set out in the Council
Directives on the Approximation of the Laws of the Member States
relating Electromagnetic Compatibility (2014/30/EU) and Low Voltage
Directive (2014/35/EU) and Radio Equipment Directive (2014/53/
EU), the Restriction of The Use of Certain Hazardous Substances in
Electrical And Electronic Equipment Directive (2011/65/EU), and Turk-
ish EEE Directive.
WEEE
Disposal of Waste Electrical and Electronic Equipment and/or Bat-
tery by users in private households in the European Union
WEEE
Battery
This symbol on the product or on the packaging indicates
that this can not be disposed of as household waste. You
must dispose of your waste equipment and/or battery by
handling it over to the applicable take-back scheme for
the recycling of electrical and electronic equipment and/
or battery. For more information about recycling of this
equipment and/or battery, please contact your city ofce,
the shop where you purchased the equipment or your
household waste disposal service. The recycling of materials
will help to conserve natural resources and ensure that
it is recycled in a manner that protects human health and
environment.
Recycling information: See http://www.benq.com/support/recycle for
details.
i 한국어
저작권
© 2016 BenQ Corporation. 모든 권리 보유 . BenQ Corporation 의
사전 서면 승인이 없으면 본 발행물의 일부 또는 전부를 전자적 ,
기계적 , 자기적 , 과학적 , 화학적 또는 수작업 및 기타 어떠한 방
법이나 형태로도 복제 , 전송 , 전사 , 검색 시스템에 저장하거나 다
른 언어나 컴퓨터 언어로 번역할 수 없습니다 .
이 문서에서 언급한 기타 모든 로고 , 제품 또는 회사 이름은 각
회사의 등록 상표 또는 저작권을 나타낸 것일 수 있으며 , 정보 목
적으로만 사용됩니다 .
책임 거부
BenQ Corporation 은 본 설명서의 내용과 관련하여 어떠한 명시
적 또는 묵시적 표현 또는 보증을 하지 않으며 특히 , 특정 목적에
대한 적합성 , 시장성 , 또는 보증에 대해 어떠한 책임도 지지 않습
니다 . 또한 , BenQ Corporation 은 본 설명서의 개정 권한을 보유
하고 있으며 , 어느 누구에게도 개정 또는 변경 사항을 사전 통보
할 의무가 없으며 필요에 따라 언제든지 내용을 수정할 수 있습
니다 .
이 설명서에 나오는 화면 이미지와 아이콘은 보여줄 목적으로 유
사하게 만든 것입니다 . 실제 표시는 이와 다를 수 있습니다 .
BenQ 는 이 제품으로부터 링크되어 있을 수 있으며 타사가 유지
하고 관리하는 웹사이트의 컨텐트 또는 유사한 리소스에 대해 책
임을 지지 않습니다 . 이러한 웹사이트나 유사한 리소스로의 링크
를 제공하는 것이 BenQ 가 해당 컨텐트에 대해 명시적 또는 묵시
적으로 어떠한 보증이나 대표한다는 것을 뜻하지 않습니다 .
이 제품에 사전 설치된 타사 컨텐트 또는 서비스는 " 있는 그대
로 " 제공됩니다 . BenQ 는 명시적 또는 묵시적으로 타사가 제공
한 컨텐트나 서비스에 대해 어떠한 보증도 하지 않습니다 . BenQ
는 타사가 제공한 컨텐트 또는 서비스가 정확하고 , 효율적이고 ,
가장 최신 상태이며 , 합법적이고 또한 완벽하다고 보장하거나 보
증하지 않습니다 . 어떤 경우에도 BenQ 는 타사의 과실을 포함 ,
그들이 제공한 컨텐트 또는 서비스에 대해 책임을 지지 않습니
다 .
타사가 제공하는 서비스는 임시 또는 영구적으로 중단될 수 있습
니다 . BenQ 는 타사가 제공하는 컨텐트 또는 서비스가 항상 좋은
상태를 유지한다는 것을 보증하거나 보장하지 않으며 , 해당 컨텐
트 또는 서비스의 중단에 대해 책임을 지지 않습니다 .
추가로 , BenQ 는 타사가 관리하는 웹사이트나 유사한 리소스에
서 사용자가 행하는 거래에 관여하지 않습니다 .
의문 , 염려 또는 분쟁이 있으면 해당 컨텐트 또는 서비스 제공업
체에 문의하십시오 .
ii한국어
목차
저작권 .................................................................................... i
책임 거부 .............................................................................. i
소개 ........................................................................................1
포장 내용물 .........................................................................2
제품 개요 .............................................................................. 2
설치 팁 ...................................................................................2
동글을 프로젝터에 연결 .................................................3
MHL 포트를 통해 연결 ..............................................................3
HDMI 포트를 통해 연결(USB 유형 A
포트가 있는 디스플레이) ......................................................... 4
HDMI 포트를 통해 연결(USB 유형 A
포트가 없는 디스플레이) ......................................................... 5
모바일 장치/컴퓨터에
BenQ QCast
설치 ............... 6
Android 장치에 설치(NFC 기능 있음) .................................6
iOS 또는 Android 장치에 설치(NFC 기능 없음) ...............7
Windows 또는 Mac OS 장치에 설치 .....................................7
BenQ QCast
로 작동하기 ..............................................8
다른 DLNA 소프트웨어로 작동하기 ........................... 9
규격 ........................................................................................9
1
한국어
소개
BenQ 비디오 스트리밍 동글 -
QCast
를 선택해 주셔서
감사합니다 . 이 제품은
BenQ QCast
소프트웨어 ( 모
바일 장치나 컴퓨터에 설치됨 ) 와 함께 작동하여 비디
오 및 음악 재생 , 문서 검토 , 웹 서핑 , 라이브 비디오 스
트리밍을 향상시킵니다 . 아무런 텍스트 입력이 필요 없
이 NFC 를 통해 빠른 무선 연결과 영사가 제공됩니다 .
이 제품은 Miracast 를 지원하므로 사용자는 모바일 장치
로부터 콘텐츠를 무선으로 디스플레이할 수 있습니다 .
지원되는 I/O 포트만 있으면 프로젝터 , LCD 모니터 또
는 TV 같은 어떤 디스플레이에나 이 동글을 연결할 수
있습니다 . 이 문서에서는 프로젝트와의 연결이 예로 사
용됩니다 . 실제 설치 및 작동은 연결되는 장치에 따라
다를 수 있습니다 .
자세한 정보를 보려면
QCast.BenQ.com
을 방문하십
시오 .
2
한국어
포장 내용물
• QCast 동글 x 1 • HDMI 케이블 x 1
• USB 케이블 x 1 • NFC 칩 스티커 x 1
( 열 및 금속 가까이 두지 마
십시오 . 구부리거나 접지 마
십시오 .)
• 사용 설명서 x 1
• NFC 지시 카드 x 1
제품 개요
LED 표시등
USB 포트
( 전원 공급용 )
MHL / HDMI 커넥터
스위처
설치 팁
시작하기 위해서는 먼저 동글 및 적절한 앱을 설치해야
합니다 .
1. 동글을 프로젝터에 연결합니다 .
2.
BenQ QCast
앱 / 소프트웨어를 장치 ( 즉 , 미디어 소
스 ) 에 설치하고 장치를 무선으로 동글과 연결합니다 .
장치와 동글 간의 무선 연결이 이루어지면 , 장치에서 프
로젝터로 콘텐츠를 미러링할 수 있습니다 .
장치의 운영 체제에 따라 서로 다른 설치 절차 및 설정
이 필요합니다 . 주의해서 이 문서의 내용을 읽고 화면의
지시 ( 제공된 경우 ) 를 따르십시오 .
3
한국어
동글을 프로젝터에 연결
동글은 프로젝터의 MHL 또는 HDMI 포트를 통해 활성
화될 수 있습니다 .
연결을 하기 전에 프로젝터 전원이 켜져 있는지 확인하
십시오 .
MHL 포트를 통해 연결
MHL
MHL
USB
1
2
1. 동글에 있는 스위처를
MHL
쪽으로 밉니다 .
2. 동글을 프로젝터의 MHL 포트에 연결합니다 . 그러면
동글이 활성화되고 LED 표시등에 파란색 불이 켜집니
다 .
동글에 전원을 공급하기 위해서는 연결된 MHL 포트의
전원이 900mA 이상 되어야 합니다 .
4
한국어
HDMI 포트를 통해 연결 (USB 유형 A
포트가 있는 디스플레이 )
2
3
4
HDMI
MHL
USB
1
1. 동글에 있는 스위처를
USB
쪽으로 밉니다 .
2. 동글을 프로젝터의 HDMI 포트에 연결합니다 .
3. 제공된 USB 케이블의 한쪽 끝을 동글의 USB 포트에
연결합니다 .
4. USB 케이블의 다른쪽 끝을 프로젝터의 USB 유형 A
포트에 연결합니다 . 그러면 동글이 활성화되고 LED
표시등에 파란색 불이 켜집니다 .
동글에 전원을 공급하기 위해서는 연결된 USB 유형 A
포트의 DC 전원이 5V/1A 이상 되어야 합니다 .
5
한국어
HDMI 포트를 통해 연결 (USB 유형 A
포트가 없는 디스플레이 )
2
3
4
5
HDMI
MHL
USB
1
1. 동글에 있는 스위처를
USB
쪽으로 밉니다 .
2. 동글을 프로젝터의 HDMI 포트에 연결합니다 .
3. 제공된 USB 케이블의 한쪽 끝을 동글의 USB 포트에
연결합니다 .
4. USB 케이블의 다른쪽 끝을 어댑터 ( 별도 구매 ) 의
USB 유형 A 포트에 연결합니다 .
5. 어댑터를 전원 소켓에 연결합니다 . 그러면 동글이 활
성화되고 LED 표시등에 파란색 불이 켜집니다 .
동글에 전원을 공급하기 위해서는 연결된 USB 유형 A
포트의 DC 전원이 5V/1A 이상 되어야 합니다 .
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
