BenQ QP01 Quick start guide

Brand: BenQ

Model: QP01

Type: Quick start guide

QCast - QP01

Video Streaming Dongle

User Guide

사용 설명서

คู่มือผู้ใช

้

i English

publication may be reproduced, transmitted, transcribed, stored in a

retrieval system or translated into any language or computer language,

in any form or by any means, electronic, mechanical, magnetic, optical,

chemical, manual or otherwise, without the prior written permission

of BenQ Corporation.

All other logos, products, or company names mentioned in this

document may be the registered trademarks or copyrights of their

respective companies, and are used for informational purposes only.

Disclaimer

BenQ Corporation makes no representations or warranties, either

expressed or implied, with respect to the contents hereof and

specically disclaims any warranties, merchantability or tness for any

particular purpose. Further, BenQ Corporation reserves the right to

revise this publication and to make changes from time to time in the

contents hereof without obligation of BenQ Corporation to notify

any person of such revision or changes.

Screen images and icons in this manual are simulated for illustrative

purposes only. Actual displays may vary.

BenQ is not responsible for the content of the websites or of similar

resources, which are maintained and controlled by third parties, that

may be linked from this product. Providing links to those websites or

to similar resources does not mean that BenQ makes any warranty

or representation to their content by expression or by implication.

Any third party content or service preinstalled in this product is

provided “as is”. BenQ does not, by expression or by implication,

make any warrant to the content or to the services provided by third

parties. BenQ does not warrant or guarantee that the content or

services provided by third parties are accurate, effective, most up-to-

date, legal, or complete. Under no circumstances shall BenQ be liable

for the content or services provided by third parties including their

negligence.

Services provided by third parties may be terminated temporarily or

permanently. BenQ does not warrant or guarantee that the content

or services provided by third parties are in good condition at any

time, and is not liable for the termination of the said content and

services.

In addition, BenQ is not involved in any transactions you conduct in

the websites or similar resources maintained by third parties.

You should contact the content or service providers for any ques-

tions, concerns, or disputes.

iiEnglish

Table of Contents

Disclaimer .............................................................................. i

Introduction ..........................................................................1

Package contents ..................................................................2

Product overview .................................................................2

Installation tips ...................................................................... 2

Connecting the dongle to your projector ......................3

Connection via MHL port ...........................................................3

Connection via HDMI port (for a display with a USB

type A port) .................................................................................... 4

Connection via HDMI port (for a display without a USB

type A port) .................................................................................... 5

Installing BenQ QCast on your mobile device/

computer ...............................................................................6

Installation on an Android device (with NFC function) .......6

Installation on an iOS or Android device

(without NFC function) ...............................................................7

Installation on a Windows or Mac OS device ........................7

Working with BenQ QCast............................................8

Working with other DLNA software .............................. 8

Regulatory Statements ........................................................9

1 English

Introduction

Thank you for choosing BenQ Video Streaming dongle -

QCast, which works with the BenQ QCast software (in-

stalled on your mobile device or computer) and enhances

video and music playback, document review, web surng,

and live video streaming. You are provided with quick wire-

less connection and projection via NFC without any text in-

put. And then you can mirror the content from your mobile

device to a display wirelessly as it supports Miracast.

The dongle can be connected to any display such as projec-

tor, LCD monitor, or TV, as long as supported I/O ports are

available. In this document, connection with a projector is

used as an example. The installation and operation may vary

by the connected devices.

For more information, visit QCast.BenQ.com.

2English

Package contents

• QCast dongle x 1 • HDMI cable x 1

• USB cable x 1 • NFC chip sticker x 1

(Keep away from heat and

metal. Do not bend/fold.)

• User guide x 1

• NFC instruction card x

Product overview

LED indicator

USB port

(for power supply)

MHL / HDMI connector

Switcher

Installation tips

To get started, you need to install the dongle and the appro-

priate app rst.

1. Connect the dongle to your projector.

2. Install the BenQ QCast app/software to your device

(i.e, the media source), and connect the device with the

dongle wirelessly.

With the wireless connection between your device and the

dongle, you can mirror the content from your device to the

projector.

Depending on your device’s operating system, different

installation procedures and setup are required. Read this

document and on-screen instructions (if provided) carefully.

3 English

Connecting the dongle to your

projector

The dongle can be activated via either the MHL or HDMI

port on your projector.

Make sure the projector is powered on before making the

connection.

Connection via MHL port

MHL

USB

1. Slide the switcher on the dongle to MHL.

2. Connect the dongle to the MHL port of your projector.

The dongle is then activated and the LED indicator lights

up in solid blue.

To power up the dongle, the power supplied from the con-

nected MHL port must be no less than 900mA.

4English

Connection via HDMI port (for a display

with a USB type A port)

HDMI

MHL

USB

1. Slide the switcher on the dongle to USB.

2. Connect the dongle to the HDMI port of your projector.

3. Connect one end of the supplied USB cable to the USB

port of the dongle.

4. Connect the other end of the USB cable to the USB type

A port of your projector. The dongle is then activated and

the LED indicator lights up in solid blue.

To power up the dongle, the DC power supplied from the

connected USB type A port must be no less than 5V/1A.

5 English

Connection via HDMI port (for a display

without a USB type A port)

HDMI

MHL

USB

1. Slide the switcher on the dongle to USB.

2. Connect the dongle to the HDMI port of your projector.

3. Connect one end of the supplied USB cable to the USB

port of the dongle.

4. Connect the other end of the USB cable to the USB type

A port of an adapter (purchased separately).

5. Connect the adapter to a power outlet. The dongle is

then activated and the LED indicator lights up in solid

blue.

To power up the dongle, the DC power supplied from the

connected USB type A port must be no less than 5V/1A.

6English

Installing BenQ QCast on your

mobile device/computer

Once the dongle has been connected to your projector

successfully, you are requested to download and install an

app/software named BenQ QCast to your mobile device/

computer. The dongle needs to work with BenQ QCast

to perform wireless media streaming.

Installation on an Android device (with NFC

function)

NFC function is only available and supported for Android

4.2 / 4.3 / 4.4.2 / 5.0 / 5.1 / 6.0.

1. Make sure your device is connected to the Internet and is

NFC-enabled.

2. Make sure the dongle is connected to the projector.

3. Read the instruction card that came with the provided

NFC chip sticker. You are recommended to stick the

sticker on the instruction card.

4. Tap your mobile device to the NFC chip sticker to install

the BenQ QCast app from Google Play and establish

the wireless connection automatically.

5. Tap your mobile device to the NFC chip sticker again to

launch the app.

• Do not stick the NFC chip sticker on the dongle.

• Do not peel the NFC chip sticker off once it’s stuck.

7 English

Installation on an iOS or Android device

(without NFC function)

Available for iOS 8 / 9 and Android 4.2 / 4.3 / 4.4.2 / 5.0 /

5.1 / 6.0.

1. Make sure your device is connected to the Internet.

2. Make sure the dongle is connected to the projector.

3. Search for BenQ QCast in the online application store

and install it.

4. Search for the dongle’s SSID (displayed as BenQ_

xxxxxxxx) and connect. If you are requested to enter

a password, check it on the upper-right corner of the

BenQ QCast screen.

5. Tap the app icon to launch it.

Installation on a Windows or Mac OS device

Available for Windows 7 / 8 / 8.1, and Mac OS 10.8 / 10.9 /

10.10.

1. Make sure your device is connected to the Internet.

2. Make sure the dongle is connected to the projector.

3. Download the BenQ QCast software from

QCast.BenQ.com.

4. Search for the dongle’s SSID (displayed as BenQ_

xxxxxxxx) and connect. If you are requested to enter

a password, check it on the upper-right corner of the

BenQ QCast screen.

5. Click the BenQ QCast icon on the desktop to launch it.

System requirements

OS Specications

Windows OS version Windows 7 / 8 / 8.1

CPU Dual Core 2 GHz or higher

ATOM is not supported.

Graphic card 64MB VRAM or above

WiFi 802.11n (2T2R recommended)

8English

OS Specications

Mac OS OS version Mac OS 10.8 / 10.9 / 10.10

CPU Dual Core Intel Core i 1.4 GHz

or higher

PowerPC is not supported.

Graphic card 64MB VRAM or above

Working with BenQ QCast

Once BenQ QCast has been installed and launched suc-

cessfully, you are ready to perform wireless media stream-

ing and enjoy the wireless projection. Simply tap Mirror or

EZMirror from BenQ QCast and follow the on-screen

instructions.

• If the device has been connected to a wireless AP, you can

screencast the web content and the les stored on your

mobile device.

• If the device is not connected to a wireless AP, you can

screencast the les stored on your mobile device only.

Functions that are not available will be grayed out.

Working with other DLNA software

The dongle can work with other DLNA-supported devices

and turn your display / projector a DLNA-compatible player.

To do so, you need to install an appropriate DLNA software

on your device rst.

Follow the on-screen instructions as the operation may

9 English

vary by software.

Regulatory Statements

Note: Not all models are available in all regions. If certain safety regu-

lations are required for specic region, BenQ ensures that products

available in that region are complied with the requested regulations.

FCC statement (for the United States only)

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

FCC Caution: Any changes or modications not expressly approved

by the party responsible for compliance could void the user’s

authority to operate this equipment.

RoHS Statement

This product is compliant to implemented RoHS (Restriction of

Hazardous Substances ) type regulations worldwide, including but not

limited to China, India, Japan, Korea and European Union.

IC statement (for Canadian users)

This Class B digital apparatus complies with Canadian ICES-3 (B).

Cet appareil numérique de la classe A est conforme à la norme NMB-

3(B) du Canada.

The device complies with RSS-210 of the Industry Canada Rules.

Operation is subject to the following two conditions (If the product

within RF function):

1) this device may not cause interference and

2) this device must accept any interference, including interference that

may cause undesired operation of the device.

10English

Ce dispositif est conforme a la norme CNR-210 d’Industrie Canada

applicable aux appareils radio exempts de licence. Son fonctionnement

est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas

produire de brouillage prejudiciable, et (2) ce dispositif doit accepter

tout brouillage recu, y compris un brouillage susceptible de provoquer

un fonctionnement indesirable.

DECLARATION OF CONFORMITY

The device complies with the requirements set out in the Council

Directives on the Approximation of the Laws of the Member States

relating Electromagnetic Compatibility (2014/30/EU) and Low Voltage

Directive (2014/35/EU) and Radio Equipment Directive (2014/53/

EU), the Restriction of The Use of Certain Hazardous Substances in

Electrical And Electronic Equipment Directive (2011/65/EU), and Turk-

ish EEE Directive.

WEEE

Disposal of Waste Electrical and Electronic Equipment and/or Bat-

tery by users in private households in the European Union

WEEE

Battery

This symbol on the product or on the packaging indicates

that this can not be disposed of as household waste. You

must dispose of your waste equipment and/or battery by

handling it over to the applicable take-back scheme for

the recycling of electrical and electronic equipment and/

or battery. For more information about recycling of this

equipment and/or battery, please contact your city ofce,

the shop where you purchased the equipment or your

household waste disposal service. The recycling of materials

will help to conserve natural resources and ensure that

it is recycled in a manner that protects human health and

environment.

Recycling information: See http://www.benq.com/support/recycle for

details.

i 한국어

저작권

사전 서면 승인이 없으면 본 발행물의 일부 또는 전부를 전자적 ,

기계적 , 자기적 , 과학적 , 화학적 또는 수작업 및 기타 어떠한 방

법이나 형태로도 복제 , 전송 , 전사 , 검색 시스템에 저장하거나 다

른 언어나 컴퓨터 언어로 번역할 수 없습니다 .

이 문서에서 언급한 기타 모든 로고 , 제품 또는 회사 이름은 각

회사의 등록 상표 또는 저작권을 나타낸 것일 수 있으며 , 정보 목

적으로만 사용됩니다 .

책임 거부

BenQ Corporation 은 본 설명서의 내용과 관련하여 어떠한 명시

적 또는 묵시적 표현 또는 보증을 하지 않으며 특히 , 특정 목적에

대한 적합성 , 시장성 , 또는 보증에 대해 어떠한 책임도 지지 않습

니다 . 또한 , BenQ Corporation 은 본 설명서의 개정 권한을 보유

하고 있으며 , 어느 누구에게도 개정 또는 변경 사항을 사전 통보

할 의무가 없으며 필요에 따라 언제든지 내용을 수정할 수 있습

니다 .

이 설명서에 나오는 화면 이미지와 아이콘은 보여줄 목적으로 유

사하게 만든 것입니다 . 실제 표시는 이와 다를 수 있습니다 .

BenQ 는 이 제품으로부터 링크되어 있을 수 있으며 타사가 유지

하고 관리하는 웹사이트의 컨텐트 또는 유사한 리소스에 대해 책

임을 지지 않습니다 . 이러한 웹사이트나 유사한 리소스로의 링크

를 제공하는 것이 BenQ 가 해당 컨텐트에 대해 명시적 또는 묵시

적으로 어떠한 보증이나 대표한다는 것을 뜻하지 않습니다 .

이 제품에 사전 설치된 타사 컨텐트 또는 서비스는 " 있는 그대

로 " 제공됩니다 . BenQ 는 명시적 또는 묵시적으로 타사가 제공

한 컨텐트나 서비스에 대해 어떠한 보증도 하지 않습니다 . BenQ

는 타사가 제공한 컨텐트 또는 서비스가 정확하고 , 효율적이고 ,

가장 최신 상태이며 , 합법적이고 또한 완벽하다고 보장하거나 보

증하지 않습니다 . 어떤 경우에도 BenQ 는 타사의 과실을 포함 ,

그들이 제공한 컨텐트 또는 서비스에 대해 책임을 지지 않습니

다 .

타사가 제공하는 서비스는 임시 또는 영구적으로 중단될 수 있습

니다 . BenQ 는 타사가 제공하는 컨텐트 또는 서비스가 항상 좋은

상태를 유지한다는 것을 보증하거나 보장하지 않으며 , 해당 컨텐

트 또는 서비스의 중단에 대해 책임을 지지 않습니다 .

추가로 , BenQ 는 타사가 관리하는 웹사이트나 유사한 리소스에

서 사용자가 행하는 거래에 관여하지 않습니다 .

의문 , 염려 또는 분쟁이 있으면 해당 컨텐트 또는 서비스 제공업

체에 문의하십시오 .

ii한국어

책임 거부 .............................................................................. i

소개 ........................................................................................1

포장 내용물 .........................................................................2

제품 개요 .............................................................................. 2

설치 팁 ...................................................................................2

동글을 프로젝터에 연결 .................................................3

MHL 포트를 통해 연결 ..............................................................3

HDMI 포트를 통해 연결(USB 유형 A

포트가 있는 디스플레이) ......................................................... 4

HDMI 포트를 통해 연결(USB 유형 A

포트가 없는 디스플레이) ......................................................... 5

모바일 장치/컴퓨터에

BenQ QCast

설치 ............... 6

Android 장치에 설치(NFC 기능 있음) .................................6

iOS 또는 Android 장치에 설치(NFC 기능 없음) ...............7

Windows 또는 Mac OS 장치에 설치 .....................................7

BenQ QCast

로 작동하기 ..............................................8

다른 DLNA 소프트웨어로 작동하기 ........................... 9

규격 ........................................................................................9

한국어

소개

BenQ 비디오 스트리밍 동글 -

QCast

를 선택해 주셔서

감사합니다 . 이 제품은

BenQ QCast

소프트웨어 ( 모

바일 장치나 컴퓨터에 설치됨 ) 와 함께 작동하여 비디

오 및 음악 재생 , 문서 검토 , 웹 서핑 , 라이브 비디오 스

트리밍을 향상시킵니다 . 아무런 텍스트 입력이 필요 없

이 NFC 를 통해 빠른 무선 연결과 영사가 제공됩니다 .

이 제품은 Miracast 를 지원하므로 사용자는 모바일 장치

로부터 콘텐츠를 무선으로 디스플레이할 수 있습니다 .

지원되는 I/O 포트만 있으면 프로젝터 , LCD 모니터 또

는 TV 같은 어떤 디스플레이에나 이 동글을 연결할 수

있습니다 . 이 문서에서는 프로젝트와의 연결이 예로 사

용됩니다 . 실제 설치 및 작동은 연결되는 장치에 따라

다를 수 있습니다 .

자세한 정보를 보려면

QCast.BenQ.com

을 방문하십

시오 .

한국어

포장 내용물

• QCast 동글 x 1 • HDMI 케이블 x 1

• USB 케이블 x 1 • NFC 칩 스티커 x 1

( 열 및 금속 가까이 두지 마

십시오 . 구부리거나 접지 마

십시오 .)

• 사용 설명서 x 1

• NFC 지시 카드 x 1

제품 개요

LED 표시등

USB 포트

( 전원 공급용 )

MHL / HDMI 커넥터

스위처

설치 팁

시작하기 위해서는 먼저 동글 및 적절한 앱을 설치해야

합니다 .

1. 동글을 프로젝터에 연결합니다 .

BenQ QCast

앱 / 소프트웨어를 장치 ( 즉 , 미디어 소

스 ) 에 설치하고 장치를 무선으로 동글과 연결합니다 .

장치와 동글 간의 무선 연결이 이루어지면 , 장치에서 프

로젝터로 콘텐츠를 미러링할 수 있습니다 .

장치의 운영 체제에 따라 서로 다른 설치 절차 및 설정

이 필요합니다 . 주의해서 이 문서의 내용을 읽고 화면의

지시 ( 제공된 경우 ) 를 따르십시오 .

한국어

동글을 프로젝터에 연결

동글은 프로젝터의 MHL 또는 HDMI 포트를 통해 활성

화될 수 있습니다 .

연결을 하기 전에 프로젝터 전원이 켜져 있는지 확인하

십시오 .

MHL 포트를 통해 연결

MHL

USB

1. 동글에 있는 스위처를

MHL

쪽으로 밉니다 .

2. 동글을 프로젝터의 MHL 포트에 연결합니다 . 그러면

동글이 활성화되고 LED 표시등에 파란색 불이 켜집니

다 .

동글에 전원을 공급하기 위해서는 연결된 MHL 포트의

전원이 900mA 이상 되어야 합니다 .

한국어

HDMI 포트를 통해 연결 (USB 유형 A

포트가 있는 디스플레이 )

HDMI

MHL

USB

1. 동글에 있는 스위처를

USB

쪽으로 밉니다 .

2. 동글을 프로젝터의 HDMI 포트에 연결합니다 .

3. 제공된 USB 케이블의 한쪽 끝을 동글의 USB 포트에

연결합니다 .

4. USB 케이블의 다른쪽 끝을 프로젝터의 USB 유형 A

포트에 연결합니다 . 그러면 동글이 활성화되고 LED

표시등에 파란색 불이 켜집니다 .

동글에 전원을 공급하기 위해서는 연결된 USB 유형 A

포트의 DC 전원이 5V/1A 이상 되어야 합니다 .

한국어

HDMI 포트를 통해 연결 (USB 유형 A

포트가 없는 디스플레이 )

HDMI

MHL

USB

1. 동글에 있는 스위처를

USB

쪽으로 밉니다 .

2. 동글을 프로젝터의 HDMI 포트에 연결합니다 .

3. 제공된 USB 케이블의 한쪽 끝을 동글의 USB 포트에

연결합니다 .

4. USB 케이블의 다른쪽 끝을 어댑터 ( 별도 구매 ) 의

USB 유형 A 포트에 연결합니다 .

5. 어댑터를 전원 소켓에 연결합니다 . 그러면 동글이 활

성화되고 LED 표시등에 파란색 불이 켜집니다 .

동글에 전원을 공급하기 위해서는 연결된 USB 유형 A

포트의 DC 전원이 5V/1A 이상 되어야 합니다 .

Page is loading ...

BenQ QP01 Quick start guide

BenQ QP01 Quick start guide

BenQ QP01 Quick start guide

Related papers

Other documents