Data sheet
48" Outdoor Grill
Model no:
BH1-48RS (refer page 1 for imperial measurements)
Dimensions
a Overall height of grill
B Overall width of grill
c Overall depth of grill (excluding handle and dials)
D Height of chassis
E Height from top of hood to top of chassis
F Height of chassis below countertop
G Overall width of chassis
H Width of chassis inside enclosure
I Width from right side of chassis to right side of motor cover
j Depth from control panel to rear of product
k Depth from control panel to front datum
l Depth from front datum to rear of chassis below countertop
m Depth from front of grill to front datum (excluding handle
and dials)
n Depth from rear of product to front datum
o Depth of rear flange
p Width of side flanges
q DIstance from gas inlet to right edge of chassis
r Distance from gas inlet to front datum
s Height from top of open hood to top of chassis
Minimum Clearances
Overall width of cavity
Overall depth of cavity
Overall height of cavity
Clearance from grill chassis to combustible construction
Clearance below countertop to combustible construction
Clearance for hood at rear / non-combustible construction
INDICATES CUTOUT -------------------------------------------------------
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
DATE: 22.02.2016
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(3/32
''). Please read the installation manual for detailed information on
installing the product. www.dcsappliances.com
0 100 200 400
millimetres
r
1356
B
A
FRONT VIEW
PLAN VIEW
PROFILE VIEW
D
pp
m
n
k
I
F
Es
o
DATUM :
TOP OF COUNTERTOP
616
DATUM : FRONT OF ENCLOSURE
q
g
J
C
CLEARANCE : COMBUSTIBLE CONSTRUCTION
DATUM : FRONT OF ENCLOSURE
676
CLEARANCE :
COMBUSTIBLE
CONSTRUCTION
CLEARANCE :
COMBUSTIBLE CONSTRUCTION
CLEARANCE : OPEN HOOD / NON-COMBUSTIBLE CONSTRUCTION
CLEARANCE : OPEN HOOD /
NON-COMBUSTIBLE CONSTRUCTION
H
l