Data sheet
0" Liberty Grill with Griddle/SideBurner
Model no:
BFGC30BGD (refer page 1 for imperial measurements)
Dimensions
a Height below countertop datum to bottom of chassis
B Overall height of grill (including griddle)
c Overall width of grill
d Overall depth of grill (excluding knobs)
e Height of grill surface
f Height above countertop
g Height of grill surface above countertop
h Depth of control panel to front datum
i Depth from control panel to rear of product
j Depth from front datum to rear of chassis below countertop
k Distance from front datum to gas inlet
l Depth of rear flange
m Depth from chassis bullnose to front datum
n Width of side flanges
27. 5
o Width of chassis inside enclosure
p Height of lid
q Width of (individual) lid
r Depth of lid
Minimum Clearances
Overall width of cavity
Overall depth of cavity
Overall height of cavity
Clearance from grill chassis to combustible construction
Clearance below countertop to combustible construction
Clearance to vertical non-combustible surface above countertop
at rear
Clearance to vertical non-combustible surface above countertop
at sides
INDICATES CUTOUT -------------------------------------------------------
INDICATES PRODUCT / CABINETRY DATUM -------------------------
INDICATES CLEARANCES ------------------------------------------------
DATE: 09.11.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(3/32
''). Please read the installation manual for detailed information on
installing the product. www.dcsappliances.com
0 100 200 400
millimetres
762
c
676
252
o
k
A
FRONT VIEW
PLAN VIEW
PROFILE VIEW
h
m
q
q
p
r
j
l
g
f
DATUM :
TOP OF COUNTERTOP
DATUM : FRONT OF ENCLOSURE
n
e
n
i
d
CLEARANCE : COMBUSTIBLE CONSTRUCTION
DATUM : FRONT OF ENCLOSURE
CLEARANCE :
NON-COMBUSTIBLE CONSTRUCTION
CLEARANCE :
COMBUSTIBLE CONSTRUCTION
b
NOT TO SCALE
CLEARANCE : NON-COMBUSTIBLE CONSTRUCTION
CLEARANCE :
COMBUSTIBLE CONSTRUCTION