Data sheet
0" Outdoor Grill with Insulation Jacket
Model no:
BH1-30R with BGB30IJS
(refer page 1 for imperial measurements)
Dimensions
A Height of insulation jacket
b Overall width of insulation jacket
c Depth from front datum to rear of insulation jacket
D Overall height of grill with insulation jacket
E Height from top of hood to top of chassis
F Height from top of chassis to bottom of insulation jacket
g Overall width of grill with insulation jacket
h Width from right side of jacket to right side of motor cover
I Width from left side of jacket to end of skewer handle
j Depth from control panel to front datum
k Overall depth of grill with insulation jacket (excluding handle
and dials)
l Depth from front of product to front datum (excluding
handle and dials)
m DIstance from gas inlet to right side of insulation jacket
n Distance from gas inlet to rear of insulation jacket
o Height from top of open hood to top of chassis
Minimum Clearances
Overall width of cavity
Overall depth of cavity
Overall height of cavity
Clearance for open hood / non-combustible construction
Clearance to adjacent vertical combustible construction from
sides and rear of grill above countertop level
INDICATES CUTOUT -------------------------------------------------------
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
DATE: 15.01.2016
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(3/32
''). Please read the installation manual for detailed information on
installing the product. www.dcsappliances.com
0 100 200 400
millimetres
g
D
FRONT VIEW
PLAN VIEW
PROFILE VIEW
f
m
l
j
h
b
A
Eo
n
DATUM :
TOP OF COUNTERTOP
DATUM : FRONT OF ENCLOSURE
c
k
CLEARANCE : OPEN HOOD /
NON-COMBUSTIBLE CONSTRUCTION
DATUM : FRONT OF ENCLOSURE
NOT TO SCALE
604
I
c
CLEARANCE :
COMBUSTIBLE CONSTRUCTION
CLEARANCE : COMBUSTIBLE CONSTRUCTION
282
881
604
BBH1-30R
BGB30IJS
CLEARANCE : OPEN HOOD /
NON-COMBUSTIBLE CONSTRUCTION