SBC Cable PCD2.K271 and PCD2.K273 Mounting Instructions & Users Guide
- Category
- Signal cables
- Type
- Mounting Instructions & Users Guide
26-033 ENG03 Leaflet PCD2.K27x 1
Saia-Burgess Controls AG
Bahnhofstrasse 18, 3280 Murten, Switzerland
T +41 26 580 30 00, F +41 26 580 34 99
www.saia-pcd.com
Cable PCD2.K271 and PCD2.K273
These shielded cable types are provided for analogue I/O modules and for H modules with 10-pole, plug-in,
screw terminal blocks. (The terminal block that is already there should be removed).
Sheathed, shielded cable with 10 strands, 0.25 mm
2
PCD end: 10-pole, plug-in, screw terminal block
Free end: 10 cm strands with color code
Type and order code: PCD2.K271 Length 1.5 m
Type and order code: PCD2.K273 Length 3.0 m
9 8 7 6 5 4 3 2 1 0
Screw terminal Cable
white
brown
green
yellow
grey
pink
blue
red
black
violet
Shielding
PCD2.K271
Diameter = 8 mm
Rubber bushing
Length = 1.5 m or 3.0 m
50 mm
100 mm
9 8 7 6 5 4 3 2 1 0
Shielding
Shielding
(free wire 300 mm long)
Label
-
1
SBC Cable PCD2.K271 and PCD2.K273 Mounting Instructions & Users Guide
- Category
- Signal cables
- Type
- Mounting Instructions & Users Guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
SBC PCD1.M2110R1 (Room) Owner's manual
-
-
-
-
-
-
-
-
-