SBC Cable types PCDx.K26x Mounting Instructions & Users Guide
- Category
- Signal cables
- Type
- Mounting Instructions & Users Guide
26-032 ENG03 Leaflet PCDx.K26x 1
Saia-Burgess Controls AG
Bahnhofstrasse 18, 3280 Murten, Switzerland
T +41 26 580 30 00, F +41 26 580 34 99
www.saia-pcd.com
Cable PCD2.K261 and PCD2.K263
These cable type are provided for digital I/O modules with 10-pole plug-in, screw terminal blocks, i.e. for
modules PCD2.E1xx, E500, E6xx, A200, A220, A4xx, A300 and B100. (The terminal block that is already
there should be removed).
Sheathed cable with 10 strands, 0.5 mm
2
.
PCD end: 10-pole, plug in, screw terminal block
Free end: 10 cm with numbered strands
Type and order codes: PCD2.K261 Length 1.5 m
Type and order codes: PCD2.K263 Length 3.0 m
PCD2.K261
Diameter = 10 mm
Rubber bushing
Length = 1.5 m or 3.0 m
50 mm
100 mm
9 8 7 6 5 4 3 2 1 0
9 8 7 6 5 4 3 2 1 0
Screw terminal Cable
1
2
3
4
5
6
7
8
9
11...
Label
10
26-032 ENG03 Leaflet PCDx.K26x 2
Saia-Burgess Controls AG
Bahnhofstrasse 18, 3280 Murten, Switzerland
T +41 26 580 30 00, F +41 26 580 34 99
www.saia-pcd.com
Cable PCD3.K261 and PCD3.K263
These cable types are provided for digital I/O modules with 10-pole, plug-in, screw terminal blocks, i.e. for
modules PCD3.E1xx, E500, E6xx, A200, A220, A4xx, A300 and B100 (The terminal block that is already
there should be removed).
Sheathed cable with 10 strands, 0.5 mm
2
.
PCD end: 10-pole, plug-in, screw terminal block
Free end: 10 cm with numbered strands
Type and order codes: PCD3.K261 1.5 m
Type and order codes: PCD3.K263 3.0 m
9 8 7 6 5 4 3 2 1 0
Screw terminal Cable
1
2
3
4
5
6
7
8
9
11...
10
-
1
-
2
SBC Cable types PCDx.K26x Mounting Instructions & Users Guide
- Category
- Signal cables
- Type
- Mounting Instructions & Users Guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
SBC Cable types PCD2.K2xx Mounting Instructions & Users Guide
-
-
SBC Systemcable and adapter Owner's manual
-
-
-
-
-
-
-
