SBC PCD2.K281 and PCD2.K283 - System Cables Mounting Instructions & Users Guide
- Type
- Mounting Instructions & Users Guide
ww w.sbc-support.com
Mounting Instruction & Users Guide
Saia-Burgess Controls AG
Bahnhofstrasse 18 | 3280 Murten, Switzerland
T +41 26 580 00 00 | F +41 26 580 34 99
www.saia-pcd.com
PP26-034 | ENG04 | 09. 2016 ubjects to change without notice.
PCD2.K281 and PCD2.K283 cables
This cable is designed for the PCD2.A250 relay output module as well as the analogue
modules PCD2.W3x5, PCD2.W6x5 and PCD2.W525 with 14-pole plug-in screw terminal block.
The existing terminal block should be removed.
Sheathed, round cable with 14 strands of 0.5 mm
2
.
PCD end: 14-pole pluggable screw terminal block
Free end: 10 cm with numbered strands
The cables are supplied in two lengths:
Type and item-number: PCD2.K281 Length 1.5 m
Type and item-number: PCD2.K283 Length 3.0 m
Screw terminal Cable
0 14
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
12 12
13 13
15
1
2
3
4
5
6
7
8
9
10
11
13 12 11 10 9 8 7 6 5 4 3 2
1 0
12
13
14
15...
Screw terminal Cable
PCD2.K281
50 mm
100 mm
13 12 11 10 9 8 7 6 5 4 3 2
1 0
Diameter = 12 mm
Rubber grommet
Length = 1.5 m respectively 3.0 m
Label
-
1
SBC PCD2.K281 and PCD2.K283 - System Cables Mounting Instructions & Users Guide
- Type
- Mounting Instructions & Users Guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
SBC Systemcable and adapter Owner's manual
-
SBC PCD3.K281 and PCD2.K283 - System Cables Mounting Instructions & Users Guide
-
-
-
-
-
SBC PCD2.W525 Owner's manual
-
-
-