2. Regency
  3. Mobile
Mobile

Regency Mobile User manual

  • Hello! I've reviewed the Mobile Ice Bin assembly instructions and am ready to assist you with any questions you may have. The document describes the process of assembling the ice bin, starting with adding legs to the ice bucket and connecting cross braces to give it a sturdy structure. The final steps show how to attach casters to the legs for easy mobility. I can answer questions about the parts, assembly steps or potential safety issues mentioned here.
  • What should I do before assembly?
    What is the first step of assembling the ice bin?
    What is the last step of assembling the ice bin?
www.RegencyTablesandSinks.com
Mobile Ice Bin
Assembly Instructions
PARTS:
(1) Ice Bucket
(4) Tube Legs
(4) Joint Sockets
(2) Long Secon Cross Brace
(2) Short Secon Cross Brace
(2) Wheel with Brake
(2) Wheel without Brake
(20) Set Screws
A
D
G
B
E
H
C
F
A
E
B
F
C
G
D
H
Assembly Instructions
1. Insert tube legs into leg gussets.
2. Tighten set screws.
3. Connect cross braces with joint
sockets.
4. Loosely ghten set screws on joint
sockets, full ghtening will come
later.
5. Place ice bin legs into the vercal
secon of the joint socket.
6. Fully ghten the joint socket set
screws.
7. Slide casters into the boom of
the tube legs.
WARNING! Risk of personal injury.
Stainless steel edges are sharp and
can cause cuts. Wear gloves during
installaon and handle with care.
A
B
H
C
D
E
H
H
G F
/