FAQs How to activate the device? User manual

How to activate the device?

Brand: FAQs

Model: How to activate the device?

Type: User manual

This manual is also suitable for

How to activate the device

Q1: How to activate the device? How

to set the time? How to connect mobile

phone and Band?

Q2: Unit setting, km→mile. Time

format (24-hour to 12-hour)

Q3：Heart Rate

Q4: Incoming call, SMS, SNS

notification

Q5:Why is the phone and Band often

disconnected?

Q6:Solution for WhatsApp only

notifications but no text content.

Q7:Family Member Sharing Feature.

Q8:Why does the sensor on the Band's

back glow green at night?

Q9:Precautions

Q10:Warranty

Q1: How to activate the device? How to set the time? How to connect

mobile phone and Band?

For the first time, activate, connect to the mobile phone, and automatically synchronize the time

Remove the strap with the built-in USB side and activate the ID155 via a standard USB plug.

1. Download "VeryFit" APP for Android and iOS devices.

Option 1: Search for "VeryFit" in APP store or Google Play and download it to your smartphone.

Option 2: Scan the QR code, download and install the APP.

2. Enable Bluetooth before binding the device.

3. Open "VeryFit" APP on your smartphone and tap on "Device" →"Add device", then your

smartphone starts searching for devices.

4. Select your device in the list of found devices, connect the device to your smartphone.

Tip: To avoid signal interference, remove other Bluetooth devices near the fitness tracker.

Q2: Unit setting, km→mile. Time format (24-hour or 12-hour)

Open "VeryFit" APP → "My" → "Settings" → "Preferences"

Q3：Heart Rate

The best place to monitor your heart rate is one finger-width away from your wrist bone,

as shown in the image below. The back of the smartwatch touches the skin. Stay still while

measuring.

Q4: Incoming call, SMS, SNS notification

Open "VeryFit" APP, "Device" → "notification management"

Tip:Calls/SMS notification function works when the device connects to your smartphone

via APP.

Q5:Why is the phone and Band often disconnected?

You need to make sure that the app is running in the background and not going into

"sleep" mode. You need to whitelist the "VeryFit" APP. Go to phone settings → battery

optimization.

You can view the VeryFit > My > Background protection guide. There are teachings for the

background operation settings of different brands of mobile phones.

Q6:Solution for WhatsApp only notifications but no text content.

WhatsApp> Settings> notifications> use high priority

notifications

Q7:Family Member Sharing Feature.

One mobile phone can manage multiple ID155 Smart Bands.

APP"VeryFit">Home>My Family>Family Members

Q8:Why does the sensor on the Band's back glow green at night?

This is because you have turned on [24/7 heart rate monitoring]. You can turn off this function in

the APP "VeryFit".

Q9:Precautions:

These are the possible causes of damage to the band:

1. The bracelet is IP68 waterproof and can be worn for swimming in shallow water. But it is not

resistant to high temperature and water vapor. Please do not wear it for hot baths, saunas, hot

springs, sun baths.

2. The requirement of the charger is 5V/500mA, do not charge for a long time, it may burn out

the electronic components inside.

3. Please make sure that the charging port is dry before charging, so as to avoid short circuit

caused by moisture in the charging port.

Q10:ONE-year hassle-free warranty

We strive to build our products with the highest attention to detail and craftsmanship. However,

sometimes there are occurrences of a defect, so we are happy to offer a ONE-year hassle-free

warranty on all our devices as we continue to make amazing products. Please contact us if you

have any questions about our devices.

1
2
3
4
5

FAQs How to activate the device? User manual

How to activate the device?

Brand: FAQs

Model: How to activate the device?

Type: User manual

This manual is also suitable for

How to activate the device

Download PDF

Other documents