Chereeki ID115 HR User manual

Smart Bracelet

User Manual

Please read before use

Page is loading ...

1

1 Device Requirements

iOS 7.1 or later Android 4.4 or later Bluetooth 4.0 or later

2 Quick Start

1. Install VeryFit for heart rate

a) Scan the QR code below by your smartphone to install the app.

ďͿ^ĞĂƌĐŚ͞sĞƌǇ&ŝƚĨŽƌŚĞĂƌƚƌĂƚĞ͟ŽŶƉƉůĞ^ƚŽƌĞŽƌ'ŽŽŐůĞWůĂǇƚŽŝŶƐƚĂůůƚŚĞĂƉƉ͘

2. Ch

arging

The smart bracelet will boot up automatically. When it is in low battery, separate the

host from the bracelet and connect it to a USB port (5V-500mA) of a computer or

laptop to charge it.

3. P

airing

ŶĂďůĞůƵĞƚŽŽƚŚŽŶƚŚĞƐŵĂƌƚƉŚŽŶĞ͕ƚĂƉ͞ĐŽŶŶĞĐƚ͟ŽƉƚŝŽŶŽŶƚŚĞƚŽƉŽĨƚŚĞĂƉƉƚŽ

2

search the smart bracelet. Choose the correct device and tap to pair it.

3 How to Use

Operations

Short tap the confirm button: function switch

Long press the confirm button: activate, mode switch

The smart bracelet will automatically sync the time and activities data to the app

once they connected. Tap confirm button to switch the modes.

1. Normal Mode

Time Mode

-> Heart Rate Mode -> Step Mode

-> Distance Mode -> Calories Mode ->

-

> Activity Time Mode

-> Alarm Mode -> Find Phone

N

ote: Alarm Mode and Find Phone will only be displayed on the screen after switch

them ON in the app.

2. Remote Camera Control Mode

Tap ͞dĂŬĞ WŚŽƚŽ͟ ŝŶ ƚŚĞ ĂƉƉ ƚŽ ƚƵƌŶ ŽŶ ƚŚĞ ĐĂŵĞƌĂ ŽĨ ǇŽƵƌ ƐŵĂƌƚƉŚŽŶĞ͘ hƐĞ ƚŚĞ

smart bracelet to take photos remotely by lift wrist or tap confirm button.

3. Sport Mode

Countdown to Enter Sport Mode

-> Stopwatch Mode

-

> Heart Rate Mode

-> Sport Step Mode -> Sport

Distance Mode

-> Sport Calories Mode -> Sport Clock

Mode

-> Countdown to Exit Sport Mode

4.

Notification Mode

Incoming Call

-> Message -> Alarm ->

Sedentary Notice

-> Anti-lost Notice -> Goal Achieved

Notice

-> Low Battery Notice -> Charging Notice

3

-> Fully Charged Notice

N

ote:

1. The incoming call and message will continuous scrolling display on the smart

bracelet. The latest incoming call or message will replace the previous one.

2. When there is an incoming call or message, the smart bracelet will display it no

matter what mode it is running. It will return to the previous mode after exit

message mode.

4 Functions

Activities Record

Record daily activities in the app, including steps, distance, calorie consumption, etc.

Sleep Monitoring

The smart bracelet will automatically monitoring sleeping status and analyze deep

sleep and light sleep period.

Notification

Alarm, call alert, sedentary remind by silent vibration.

Anti-lost

When the smartphone is beyond the Bluetooth range (5m), the smart bracelet will

vibrate.

Remote Camera Control

hƐĞƚŚĞƐŵĂƌƚďƌĂĐĞůĞƚƚŽĐŽŶƚƌŽůƐŵĂƌƚƉŚŽŶĞ͛ƐĐĂŵĞƌĂƚŽƚĂŬĞƉŚŽƚŽƐ͘

Heart Rate Monitoring

Use the smart bracelet to monitor heart rate and help to make a better exercise plan.

Data Storage

The smart bracelet will clear the activities data every day by 0:00 AM. It can store the

ůĂƚĞƐƚϳĚĂǇƐ͛ĚĂƚĂŝŶƚŚĞƐŵĂƌƚďƌĂĐĞůĞƚ͘/ƚŝƐƌĞĐŽŵŵĞŶĚĞĚƚŽƐǇŶĐĚĂƚĂǁŝƚŚƚŚĞĂƉƉ

at least one time in 7 days.

* Measuring results are for references only. It cannot be used for medical diagnosis.

Take these measuring results as diagnostic basis is dangerous. Please follow the

doctor's advice.

5 FAQ

Cannot find the device when pairing.

a) Please make sure the Bluetooth is enabled on your smartphone, and your

smartphone meets system requirements.

b) Please make sure the distance between smartphone and smart bracelet is less

4

than 0.5m when pairing, and keep the distance within 10m when they are

connected.

c) Please make sure the smart bracelet is not in low battery, and recharge it if it is

necessary.

Cannot connect the device with the app.

Please reboot the smartphone and reconnect them.

How to restore factory settings?

Make sure the smart bracelet is connected with the smartphone. Open the app, go to

User -> System Setting -> Restart Device to reboot it to factory settings.

How to upgrade the device?

Make sure the smart bracelet is connected with the smartphone. Open the app, go to

Device -> Device Upgrade to upgrade it. It will take several minutes to complete the

upgrade.

6Specification

CPU: Noedic

Sensor: Kionix

Weight: 18g

Bluetooth: Version 4.0

Battery Type: Polymer Rechargeable Lithium Battery

Battery Capacity: 45mAh

Working Temperature: -10 to 45ć

Material: Silicone and Plastic

Waterproof: IP67

7 Support

Thank you for your purchase! We are always striving to achieve your satisfaction and

open for new and improving thinking. If you have any questions or suggestions,

please contact us at any time and we will reply to you within 24 hours.

We would also appreciate reviews on Amazon or other platform to help us grow.

Email:

support@chereeki.com

Web: www.chereeki.com

Thank you!

Chereeki Customer Support

5

F

acebook @ChereekiOfficial Twitter @ChereekiCN www.chereeki.com

Page is loading ...

Chereeki ID115 HR User manual

Chereeki ID115 HR User manual

in other languages

Other documents