Wildix WP480G User guide

WORKFORCE WIFI DONGLE USER GUIDE - ENGLISH!

PACKING LIST

• 1 x WorkForce WiFi Dongle

• 1 x Type-C adapter

Note: The dongle support starts from WorkForce ﬁrmware v. 65.145.4.11.

SAFETY INFORMATION

https://www.wildix.com/safety-information/

WI-FI DONGLE CONNECTION

1. Connect WorkForce WiFi Dongle to Type-C adapter

2. Plug the Dongle into WorkForce USB Type-C port

Notes:

• Check that ACL rule “Can use” - “Advanced phone

settings menu” is set in WMS -> Users -> Groups

for users who need access to the feature

• WorkForce with a connected dongle requires

at least 5V 2A power source

• Wi-Fi Bridge mode is not supported

NETWORK CONNECTION

To connect WorkForce to a Wi-Fi network:

1. Press Menu soft key on WorkForce

2. Go to Network menu and select WLAN option

3. Enable Wi-Fi connection: use Navigation keys or press Switch soft key to change Wi-Fi

connection status from Disable to Enable; press Save soft key

4. Searching for Wi-Fi Networks is in progress. After it is completed, there is a list of all available

networks

5. Select a Wi-Fi network from the list and press Connect soft key

6. Enter password and press Save soft key

7. WorkForce is now connected to the Wi-Fi network; the LED indicator blinks with fast short blue

ﬂashes during data transfer

Version 12/2020

Page of 1 1

Full guide online:

www.wildix.com