Barco F35 series Installation guide

F35 series
Barco
Brand
Barco
Model
F35 series
Category
Projector mounts
Type
Installation guide

This manual is also suitable for

Barco F35 series offers an exceptional visual experience with its 4K UHD resolution, delivering stunningly sharp and detailed images. It features HDR compatibility, ensuring vibrant colors and high contrast ratios for a realistic and immersive viewing experience. With its 3-chip DLP technology, the F35 series provides excellent color reproduction and brightness, making it ideal for home cinema, gaming, and other demanding applications. Additionally, its low input lag and high refresh rate ensure smooth and responsive gameplay for an enhanced gaming experience.

Barco F35 series offers an exceptional visual experience with its 4K UHD resolution, delivering stunningly sharp and detailed images. It features HDR compatibility, ensuring vibrant colors and high contrast ratios for a realistic and immersive viewing experience. With its 3-chip DLP technology, the F35 series provides excellent color reproduction and brightness, making it ideal for home cinema, gaming, and other demanding applications. Additionally, its low input lag and high refresh rate ensure smooth and responsive gameplay for an enhanced gaming experience.

Mounting
Instructions
Lens Support Kit
Support Kit
1
The lens support kit is designed to be used with projectors using the EN47 Wide Angle lens. The purpose is to secure
the preferred lens settings when correctly adjusted, preventing them from being altered unintentionally. It also supports
the lens itself, which is important especially in ceiling mounted environments.
The support kit is delivered fully assembled and consists of the following parts:
2
Mounting the kit
The lens support kit is mounted as follows:
Positioning: Position the lens support kit over the projector bottom as shown in illustration A below, with the lens
support bracket (no 1 in /section 1 illustration) pointing towards the lens.
Locate ceiling mount screw holes: Place the kit so that the holes in the bracket match the holes in the projector
intended for ceiling mounting (4 x M6), see illustration B.
Tighten screws: Enter the screws and tighten so that the bracket is firmly attached to the projector. Make sure not
to overtighten. Do not yet tighten the 2 locking screws on the lens support bracket below the lens, see illustration C.
These have to remain loose for positioning of the lens.
3
Adjusting and securing the lens
Do the following to adjust the lens and securing it with the lens support:
• Adjust the lens to desired position for optimal picture size and quality for the intended use. Make sure the
2 locking screws are loose to give full freedom to move the lens around. Please refer to projector user
documentation/web for adjustment procedure.
• When the picture has been adjusted according to the requirements, lock the lens positioning by tightening
the 2 locking screws (A) and entering and fastening the lens lock screw (B) into the lens itself. Do not
overtighten.
1
2
3
4
1 Lens support
2 Lens support baseplate
3 Accessories rail
4 Locking screws
A
CB
For further information on ceiling mounting of your projector please refer the user manual or
our web page
A Locking screws
B Lens lock screw
(use M6 screw with max 15mm length)
B
A
4
Additional information
When mounting the lens support kit, please notice the following:
• Do not activate lens shift function on keypad or via remote control when the lens is in locked position on the
lens support bracket.
• To avoid activating lens adjustment as mentioned above, go to the projector menu and deactivate the lens
shift function.
• Make sure not to overtighten any of the screws as this may cause damage.
Please notice that the lens support kit is primarily intended for ceiling mounted projectors, but it may
also be used in other positions (as long as it is according to projector mounting limitations).
601-0352-00
Please visit our web site to download product manuals or to find related information
www.barco.com
  • Page 1 1

Barco F35 series Installation guide

F35 series
Barco
Brand
Barco
Model
F35 series
Category
Projector mounts
Type
Installation guide
This manual is also suitable for

Barco F35 series offers an exceptional visual experience with its 4K UHD resolution, delivering stunningly sharp and detailed images. It features HDR compatibility, ensuring vibrant colors and high contrast ratios for a realistic and immersive viewing experience. With its 3-chip DLP technology, the F35 series provides excellent color reproduction and brightness, making it ideal for home cinema, gaming, and other demanding applications. Additionally, its low input lag and high refresh rate ensure smooth and responsive gameplay for an enhanced gaming experience.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents