Rust Buster RB1004 Installation guide

Brand: Rust Buster

Model: RB1004

Category: Cars

Type: Installation guide

Rust Buster RB1004 Rust Buster RB1004 Sway Bar Mount Brackets are designed to provide a secure mounting point for your sway bar, helping to improve handling and stability on your Jeep® CJ. These brackets are made from high-quality steel and are powder-coated for durability. They are easy to install, requiring only basic tools and no welding.

With the Rust Buster RB1004 Sway Bar Mount Brackets installed, you'll be able to take your Jeep® CJ off-road with confidence, knowing that your sway bar is securely mounted and will help to keep you safe.

Rust Buster RB1004 Rust Buster RB1004 Sway Bar Mount Brackets are designed to provide a secure mounting point for your sway bar, helping to improve handling and stability on your Jeep® CJ. These brackets are made from high-quality steel and are powder-coated for durability. They are easy to install, requiring only basic tools and no welding.

With the Rust Buster RB1004 Sway Bar Mount Brackets installed, you'll be able to take your Jeep® CJ off-road with confidence, knowing that your sway bar is securely mounted and will help to keep you safe.

RB1004

Jeep® CJ

Sway Bar Mount Brackets

100400

REQUIRED TOOLS

Jack Stands or Lift

Paint/Primer

Sockets & Ratchet

KIT CONTAINS

Sway Bar Mount Brackets

QTY

1

RB1004

Jeep® CJ

Sway Bar Mount Brackets

2 100400

1) PREPARING YOUR VEHICLE

Begin by disconnecting your battery prior to starting

your installation.

Inspect your vehicle for leaking fuel lines, fuel tank

and engine components. If you have fuel leaks

repair all leaks prior to starting your installation. If

your fuel tank is near your welding area remove

your tank prior to welding.

Remove all combustible items above the work area

such as seats, carpets, padding, etc.

Keep all flammable materials away from the

vehicle work area.

2) PREPARING YOUR WORKSTATION

Keep a fire extinguisher and water close by in the

case of fire and make sure you always have a

designated “Fire Watch” to assist during the cutting

or welding phases.

Abide by all apprenticed welding safety standards

and practices.

Always use appropriate welding eye protection, ear

protection, and work and fire safety gloves during

the installation and within the work area.

WARNING!

If you are unsure on how to perform the installation

or how to operate any of the required tools listed

above, it is HIGHLY advised that you enlist the work

of a certified welder/installer.

Failure to follow proper safety precautions and

instructions may result in serious injury. The user

assumes all liability when installing the product.

RB1004

Jeep® CJ

Sway Bar Mount Brackets

3 100400

3) PREPARING FOR YOUR INSTALL

Lift your vehicle.

Remove the front wheels and tires set them out of

the way.

Support your rear axle using two jack stands for the

driver and passenger sides.

Identify Passenger or Drivers bracket:

-Passenger side bracket has a beveled P marking.

-Drivers side bracket has a beveled D marking.

4) PAINT

If you choose, paint/primer your new Rust Buster

Sway Bar Mount Brackets to seal and prevent future

rust.

5) REMOVAL

Unbolt and remove your factory Sway bar mount

brackets.

6) INSTALL

Reinstall your new sway bar mount brackets.

1
2
3

Rust Buster RB1004 Installation guide

Brand: Rust Buster

Model: RB1004

Category: Cars

Type: Installation guide

Rust Buster RB1004 Rust Buster RB1004 Sway Bar Mount Brackets are designed to provide a secure mounting point for your sway bar, helping to improve handling and stability on your Jeep® CJ. These brackets are made from high-quality steel and are powder-coated for durability. They are easy to install, requiring only basic tools and no welding.

With the Rust Buster RB1004 Sway Bar Mount Brackets installed, you'll be able to take your Jeep® CJ off-road with confidence, knowing that your sway bar is securely mounted and will help to keep you safe.

Related papers

Other documents