1. Connect a source such as a Blu-Ray Player, game
console,A/VReceiver,CableorSatelliteReceiver,etc.
totheHDMIinputontheTransmittingunit.
2.ConnectadisplaysuchasanHDTVorHDProjector
totheHDMIoutputontheReceivingunit.
3.ConnectasingleCategory5e/6upto164ft/50mto
theoutputoftheTransmittingunit,andtheotherend
totheinputoftheReceivingunit.
4. For power, plug both the Transmitting unit and
Receivingunitwiththeincludedpowersupplies.
5. Power on each device in the same sequence
(receiver and transmitter will already be powered
wheneitherunitispluggedin.)
Atthispointthedisplayconnectedshoulddisplaythe
source signal connected to the extender set. If no
signal is being displayed, check the receiver EQ
swithcer. If a display is having dificulty receiving a
signal,seeEDIDsectionandperformEDIDlearningor
access the display's menu and adjust the resolution
(lowesttohighestuntilsignalisdisplayed).A24Hz
7.CONNECTANDOPERATE