2. ROOMS TO GO
  3. 43421015

ROOMS TO GO 43421015, 43521017 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the AXEL 101-24 Counter Stool from ROOMS TO GO. The document provides a detailed parts list, hardware list, and step-by-step instructions for assembly. I'm ready to answer any questions you might have about assembling your new stool.
  • What should I do before starting assembly?
    What should I do before tightening all the screws?
    Where should I assemble the chair?
Page 1 of 2
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small
parts. Which may have come loose inside the carton during shipment. Identify and count all parts and
compare with the hardware list as below:
No. Picture Description Dimension Qty
1
JCBC (M6) 6 x P1.0 x 90mm 4 Pcs
2
JCBC (M6) 6 x P1.0 x 60mm 4 Pcs
3
JCBC (M6) 6 x P1.0 x 40mm 2 Pcs
4
CSK Screw (M4) 4 x 40mm 6 Pcs
5
Allen Wrench (M4) 4 x 60mm 1 Pc
No. Qty
A
1 Pc
B
1 Pc
C
1 Pc
D
1 Pc
E
1 Pc
ROOMS
TO GO
ASSEMBLY INSTRUCTIONS
MODEL : 101-24
AXEL
101-24 COUNTER STOOL- SKU#43401013/ 43501015
Hardware List
Parts List
Description
Back Rest
Seat Frame
Front Left Leg
Front Right Leg
Left Stretcher
E
1 Pc
F
1 Pc
G
1 Pc
Right Stretcher
Front Stretcher
PARTS DETAILS
Left Stretcher
A
B
C
D
F
E
G
Page 2 of 2
Assembly seat frame to the backrest
Assembly Step
STEP 1
STEP 2
STEP 3
Assembly the stretcher by CSK Screw
NOTE:
To ensure that chair is level, assemble the chair on flat & soft surface. DO NOT tighten all the
screws & bolts until the chair been adjust & level all the legs so that they do not wobble. Once
adjusted then only tighten all the screws using Allen Key while making sure that the unit remain
level.
STEP 2
STEP 3
Assembly the chair leg by JCBC
G
/