Glamour Home GHTVS-1400 Operating instructions

Brand
Glamour Home
Model
GHTVS-1400
Type
Operating instructions
SCREWDRIVER HAMMER
SELF-PREPARED TOOLS: Tools below are NOT included in package.
Read instruction carefully . See Furniture Parts list and Hardware List for guidance . Be sure you have all parts before you start assembling .
Place and assemble furniture on a clean flat soft surface , such as carpet or rug to pervent being scratched .
Before you begin, please follow assembly instructions carefully, then follow them step by step.
Reminder:
Please ensure that all surfaces and edges with colours/laminations are facing forward/outward.
1
2
PART LIST
TOP PANEL MINI FIX
4
SIDE PANEL (L)
6
SIDE PANEL (R)
7
8
QTY
3
5
CENTER PANEL (R)
HARDWARE
A
B
F
E
C
H
G
12 SETS
M3.5 X 16MM C.B SCREW
ALLEN KEY M4 1 PC
BOTTOM PANEL
BACK PANEL
CENTER PANEL (L)
DRAWER FRONT
D
I
J
A1 A2 A3
M8 X 30MM WOOD DOWEL 20 PCS
9
10
11 BOTTOM DRAWER
DRAWER SIDE
DRAWER BACK
14" DRAWER SLIDE K1 ( L/R )
K2 ( L/R )
5/8 NAIL
M4 X 38MM C.B SCREW
MODEL : GHTVS-1400ASSEMBLY INSTRUCTIONS PAGE: /51
2 SETS
30 PCS
24 PCS
48 PCS
1 PC
1 PC
1 PC
1 PC
1 PC
1 PC
1 PCS
2 PCS
2 PCS
4 PCS
2 PCS
JCBC Screw M6 x 25MM 8 PCS
M6 X 50MM
CSK CAP WOOD SCREW 8 PCS
5/8 PVC NAIL LEG 5 PCS
12
13 CENTER LEG
MIDDLE BONE 4 PCS
1 PCS
8
9
10
10
11
8
9
10
10
11
K
M4 X 30MM C.B SCREW
14 APRON BONE FRONT 1 PCS
15 APRON BONE BACK 1 PCS
1
5
6
3
4
7
12
12
2
12
12
13
14
15
16
16
16 APRON BONE SIDE 2 PCS
2 PCS
STEP 1 STEP 2
STEP 3 STEP 4
MODEL : GHTVS-1400ASSEMBLY INSTRUCTIONS PAGE: /5
2
- Insert hardware A1 onto panel (3),(4),(5)and(6).
(Repeat 8 times.)
- Insert hardware A2 onto panel (1).
(Repeat 8 times.)
- Insert hardware B onto panel (3),(4),(5)and(6).
(Repeat 16 times.)
SCREWDRIVER
REQUIRED
* Ensure the arrows on hardware A1 point towards mounting positions.
Fix hardware K1 (L) into panel (3) and (6) with hardware E.
Fix hardware K1 (R) into panel (4) and (5) with hardware E.
(Repeat 3 times for each hardware.)
SCREWDRIVER
REQUIRED
x4
ROTATE
x4 x4
ROTATE ROTATE
K1(L)
EEE
Third hole from the edge.First hole from the edge. Small hole at the center.
A2
x8
ROTATE
1
5
x16
PRESS
B
34
PRESS
A1
x8
6
K1(L)
K1(R) K1(R)
- Attach panel (3),(4),(5) and (6) to panel (1).
- Insert all hardware A2 into A1.
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 8 times.)
OR
SCREWDRIVER
REQUIRED
* In this step hardware A1, A2 and B are pre-inserted.
HARDWARE
D
5
6
3
4
1
56
3
4
- Insert hardware A1 onto panel (15).
(Repeat 4 times.)
- Insert hardware A2 onto panel (14).
(Repeat 4 times.)
- Insert hardware B onto panel (14)and(15).
(Repeat 4 times.)
* Ensure the arrows on hardware A1 point towards mounting positions.
SCREWDRIVER
REQUIRED
PRESS
A1
x4
A2
x4
ROTATE
x4
PRESS
B
14
16
15
16
ROTATE
Section View
x8
A2
A1
x8 PRESS
A3
STEP 5 STEP 6
STEP 7 STEP 8
MODEL : GHTVS-1400ASSEMBLY INSTRUCTIONS PAGE: /53
ROTATE
x8
I
D
HAMMER
REQUIRED
x4
HIT
J
Connect panel (2) to panel (3),(4),(5) and (6) by using hardware C and D.
(Repeat 8 times.)
ROTATE
x8
C
D
* In this step hardware C are pre-inserted.
2
5
6
3
4
2
1
- Attach panel (14) to panel (15).
- Insert all hardware A2 into A1.
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 4 times.)
OR
SCREWDRIVER
REQUIRED
* In this step hardware A1, A2 and B are pre-inserted.
HARDWARE
D
ROTATE
Section View
x4
A2
A1
x4 PRESS
A3
Connect panel (14) and (15) to panel (2) by using hardware G.
(Repeat 14 times.)
SCREWDRIVER
REQUIRED
ROTATE
G
x14
15
16
16
14
12
12
15
16
16
14
2
14
15
16
16
16
16
15
14
Connect panel (12) to panel (2) by using hardware D and I.
(Repeat 8 times.)
Hit hardware J at the bottom of panel (14) and (15).
(Repeat 4 times.)
STEP 9 STEP 10
STEP 11 STEP 12
MODEL : GHTVS-1400ASSEMBLY INSTRUCTIONS PAGE: /5
4
HAMMER
REQUIRED
Assemble panel (7) to entire body with hardware H.
(Repeat 24 times.)
x24
HIT
H
Assemble panel (10) to panel (8) and (9)
by using hardware G.
(Repeat 8 times.)
SCREWDRIVER
REQUIRED
* In this step only show one of the drawers.
2
4
7
10
10
9
8
Assemble panel (11) to entire body with hardware H
(Repeat 12 times.)
HAMMER
REQUIRED
x12 HIT
H
* In this step only show one of the drawers.
x2
F
ROTATE
SCREWDRIVER
REQUIRED
- Fix hardware F onto panel (15) by using screwdriver.
(Repeat 2 times)
- Hit hardware J at the bottom of panel (13).
(Repeat 1 times.)
10
98
11
G
x8 ROTATE
2
4
10
16
16
15
14
1
1
5
6
3
16
15
14
16
13
x1
HIT
J
STEP 13 STEP 14
MODEL : GHTVS-1400ASSEMBLY INSTRUCTIONS PAGE: /5
5
Assemble hardware K2 (L) & K2(R) to panel (11) by using
hardware E.
(Repeat 6 times for each hardware.)
SCREWDRIVER
REQUIRED
K2 (L)
* In this step only show one of the drawers.
Hole at the center.
Third hole from the edge. Third hole from the edge.
EEE
x2 x2 x2
ROTATE ROTATE ROTATE
*Hardware K2 (L),K2 (R) shall be leaning against panel (8) when assembling.
K2 (R)
Put all the drawer in place along the drawer slides.
11
9
10
10
8
8
1
2
8
4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Glamour Home GHTVS-1400 Operating instructions

Brand
Glamour Home
Model
GHTVS-1400
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents