2. Computers & electronics
  3. Audio & home theatre
  4. Home audio sets
  5. Philips
  6. MCM108
MCM108

Philips MCM108, MCM108B/98 User manual

  • Hello! I am an AI chatbot trained to assist you with the Philips MCM108 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What's included in the box?
    How do I set the clock?
    How do I play a CD?
    How do I listen to the radio?
Quick Start Guide
Step B
Step A
Enjoy
Setup
1
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
MW antenna
Quick Start Guide
Pull out the insulation
plastic sheet.
2
User Manual
User manual
VOLUME
ALBUM
DBB DSC
MUTE
SLEEP TIMER
REPEAT
SHUFF
AUX PROG
CD
TUNER
VOLUME
DBB DSC
Remote Control
MCM108
MCM108B
MCM108C
MCM108_98 QUG_Eng 16/3/07, 9:521
Step A
Setup
AC power cord
FM wire antenna
Speaker
(right)
Speaker
(left)
MW loop antenna
1
2
2
3
1
2
3
Tip
It is unnecessary to
connect the FM pigtail
antenna since it is
fixed to the main unit.
Connection
5
1
2
3
4
Setting the clock
AUX
-
IN
iR
PROG/CLOCK
MICRO SYSTEM MCM118
For radio reception, connect the supplied MW antenna to the
MW aerial terminal.
Connect the speaker wires to the
SPEAKERS terminals.
Connect the power cord of the system to the
AC power outlet.
In standby mode, press
PROG/CLOCK button.
The clock digits for the hours flash.
Press ¡1 / 2™ to set the hours.
Press PROG/CLOCK again. The clock digits for the minutes flash.
Press ¡1 / 2™ to set the minutes.
Press PROG/CLOCK to confirm the time.
MCM108_98 QUG_Eng 16/3/07, 9:522
1
2
3
4
5
Tip
Detailed playback features and
additional functions are described in
the accompanied owner's manual.
Step B
Enjoy
Playing a disc
1
2
Select TUNER source.
Press BAND (TUNER on the remote control) once or more to select your waveband.
Tur n TUNING 0 to tune to a station.
Listening to radio
3
SLEEP TIMER
REPEAT
AUX
SHUFF
PROG
CD
TUNER
MUTE
CD
ALBUM
STANDBY-ON
SOURCE VOLUME
-
+
BAND
O
P
E
N
/
C
L
O
S
E
PROG/CLOCK
TUNING
SOURCE
BAND
TUNING
Select CD source.
Press OPEN•CLOSE on the top of the system to open the CD door.
Insert a disc with the printed side facing up and press down
on OPEN•CLOSE to close the CD door.
PressÉÅto start playback.
Press 9 to stop playback.
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (CD or TUNER,
for example).
– Then select the desired function (
2;
,
í
,
ë
for example).
2007 C Koninklijie Philips Electronics
N.V. All rights reserved.
http://www.philips.com PDCC-JH-0744
MCM108_98 QUG_Eng 16/3/07, 9:523
/