Vicon V670/SN673V Series User manual

V670/SN673V Series
Vicon
Brand
Vicon
Model
V670/SN673V Series
Category
Signal cables
Type
User manual

This manual is also suitable for

This heater assembly is designed to provide heat to the new 3-Axis Vandal resistant domes.
The manual is designed to assist in the fitting of the heater assembly.
INSTRUCTION MANUAL
Heater assembly for Color and Day/ Night domes
Thank you for choosing the heater assembly for the 3-Axis Vandal resistant domes.
Before attempting to connect or operate this product, please read and follow these instructions.
General
Contents of Package
1. Heater PCB
2. Heater
3. Extension cable (for Type 3 only)
4. User manual
Installation
1.Remove support bracket
2. Remove cable tie of the heater power cable
(Type 1, Type 2 only)
5. Screw
3. Install the Heater PCB kit
Heater
Insert heater power connector to heater PCB(CN1).
Attach the adhesive end of the heater to the housing.
<TYPE-1> <TYPE-2>
<TYPE-3>
Power supply 24VAC /12VDC
Power consumption 20W Max
o o
Heater ON : at 41 F (5 c )
o o
Heater OFF : at 59 F (15 c)
Insert heater power connector to heater PCB(CN1).
Attach the adhesive end of the heater to the housing.
50303038A
Specification
Power source
Power consumption
Operating Temperature
Insert heater extension cable to connect
heater PCB(CN1) to control PCB(J602 Heater).
Attach the adhesive end of the heater to the housing.
Model .: V661V-312N, V661V-922N, V661D-312N Model .: V661V-312D, V661V-922D, V661V-312IR
Model .: V662V-312D, V662V-922D
  • Page 1 1
  • Page 2 2

Vicon V670/SN673V Series User manual

V670/SN673V Series
Vicon
Brand
Vicon
Model
V670/SN673V Series
Category
Signal cables
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents