1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read the instructions and look at the pictures before installing the ProClip. This ProClip can be installed on
any of the air vents.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the adhesive tape
cover on the ProClip. Insert the upper angled edge of the ProClip into the seam between the upper part of the
vent and the frame around the vent. (It often helps to start with one corner of the ProClip first).
2. Using your thumb and forfingers, flex the ProClip together to insert the lower angled edge of the ProClip into
the seam between the lower part of the vent and the frame around the vent.
3. and 4. The ProClip is in place.
2(2)