Metra 95-1005 Operating instructions

95-1005
Metra
Brand
Metra
Model
95-1005
Category
Car kits
Type
Operating instructions

Metra 95-1005 is a car stereo installation kit for various Kia and Hyundai models from 2002 to 2006. It allows for the installation of a double DIN or stacked ISO DIN head unit in vehicles that originally had a single DIN radio. The kit includes a trim plate, brackets, and hardware for a secure and professional-looking installation.

Metra 95-1005 is a car stereo installation kit for various Kia and Hyundai models from 2002 to 2006. It allows for the installation of a double DIN or stacked ISO DIN head unit in vehicles that originally had a single DIN radio. The kit includes a trim plate, brackets, and hardware for a secure and professional-looking installation.

INSTALLATION INSTRUCTIONS FOR PART 95-1005
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004-07 METRA ELECTRONICS CORPORATION
KIT FEATURES
• Double DIN head unit provision
• Stacked ISO DIN head unit provision
A) DDIN Trim Plate | B) DDIN BRACKETS
KIT COMPONENTS
TOOLS REQUIRED:
95-1005
A B
APPLICATIONS
2003-2006 Kia Sorrento LX
(excluding sport models)
2002-2005 Kia Sedona
2002-2005 Kia Rio
2002-2006 Kia Spectra
Phillips Screwdriver I Small Flat Blade Screwdriver
Wiring Harness (Sold Separately)
• 70-1003 Kia harness 1995-2002
• 70-7301 Hyundai Kia harness 1999-2008
TABLE OF CONTENTS
95-1005
Dash Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Kit Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-8
Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10
95-1005
1
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
Open ashtray and unclip and remove
side panels.
(Figure A)
2
2003-2006 KIA SORRENTO
(EXCLUDING SPORT MODELS)
Remove (8) Phillips screws from the
radio trim panel the remove the
panel.
(Figure B)
3
Remove (4) Phillips screws securing
radio.
(Figure C)
4
DASH DISASSEMBLY
A
B
C
95-1005
2
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
Remove the ashtray and (1) Phillips
screw exposed in the ashtray cavity.
(Figure A)
2
2002-2005 KIA SEDONA
Unclip and remove the small trim
panel from around radio, climate
controls and shifter.
(Figure A)
3
Remove (4) Phillips screws from the
radio trim panel then unclip and
remove the panel.
(Figure B)
4
Remove (4) Phillips screws securing
radio.
(Figure C)
5
DASH DISASSEMBLY
A
B
C
95-1005
3
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
1
Remove the ashtray and (1) Phillips
screw exposed in the ashtray cavity.
(1 Phillips screw exists in 2002 model
only).
(Figure A)
2
2002-2005 KIA RIO
Unclip and remove entire panel sur-
rounding radio and climate controls.
(On 2002 models remove knob from
fresh air/recirculate control).
(Figure B)
3
Remove (4) Phillips screws securing
radio.
(Figure C)
4
DASH DISASSEMBLY
A
B
C
4
95-1005
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
1
Remove (2) Phillips facing up above
gauge cluster.
(Figure A)
2
2002-2003 KIA SPECTRA
Unsnap and remove top portion of
steering wheel column cover.
(Figure B)
3
Unsnap and remove entire panel
from left side of steering wheel to
right side surrounding radio.
(Figure C)
4
Remove (4) Phillips screws securing
radio.
(Figure D)
5
DASH DISASSEMBLY
A
B
C
D
5
95-1005
DASH DISASSEMBLY
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
1
Unclip and remove entire panel sur-
rounding radio and climate controls.
(Figure A)
2
2004-2006 KIA SPECTRA
Remove (4) Phillips screws securing
radio.
(Figure B)
3
A
B
95-1005
KIT ASSEMBLY
6
You will need to cut and remove the tabs according to the chart and refer-
ring to the diagram below:
The 2002-2005 Kia Sedona and the 2001-2003 Kia Spectra will use the tabs
marked by the number 2 on the brackets. Note: For the 2001-2003 Kia
Spectra proceed to page 9 for Final Assembly.
The 2002-2005 Kia Rio will use the tabs marked by the number 3 on the
brackets.
The 2003-2006 Sorrento LX and the 2004-2006 Kia Spectra will use the tabs
marked by the number 1 on the brackets.
1
2
3
1
2
3
L
R
TAB REMOVAL INSTRUCTIONS
95-1005
KIT ASSEMBLY
7
2
A
Slide the DDIN radio unit into the
trim plate bracket assembly and
secure the unit to the kit using the
screws supplied with the head unit.
(
Figure B)
Slide the appropriate bracket into
the trim plate aligning the holes in
the trim plate to the clips on the
bracket. (
Figure A)
1
B
DOUBLE DIN HEAD UNIT PROVISION
95-1005
KIT ASSEMBLY
8
2
A
Slide the stacked ISO DIN units into
the trim plate bracket assembly and
secure the units to the kit using the
screws supplied with the head units.
(
Figure B)
Slide the appropriate bracket into
the trim plate aligning the holes in
the trim plate to the clips on the
bracket. (
Figure A)
1
B
STACKED ISO DIN HEAD UNIT PROVISION
9
95-1005
FINAL ASSEMBLY
Place the 95-1005 into dash opening, do not bolt in.
(Figure A)
1
Snap trim bezel back into place and pressure fit kit into place.
2
2002-2006 KIA SPECTRA
Reassemble dash in the reverse order of dash disassembly on page 4
beginning with step #3.
3
A
10
FINAL ASSEMBLY
1
Locate the factory wiring harness in the dash and make the connection as shown.
Metra recomends using the proper mating adapter and making the connections as
shown. (Isolate and individually tape off the ends of any unused wires to prevent
electrical short circuit.)
2
Re-connect the negative battery terminal and test the unit for proper operation.
3
Reassemble radio and dash assemblies in reverse order of disassembly.
A
A) Strip wire ends back 1/2"
B) Twist ends together
C) Solder
D) Tape
B
C
D
Make wiring connections using the EIA color code chart shown below and the instructions included with the head
unit. Metra recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individually
tape off ends of any unused wires to prevent electrical short circuit.
12V Ignition / Acc . . . Red
12V Batt / Memory . . Yellow
Ground . . . . . . . . . . . Black*
Power Antenna . . . . . Blue
Amp Turn-On . . . . . . Blue / White
Amp Ground . . . . . . . Black / White
Illumination. . . . . . . . Orange
Dimmer . . . . . . . . . . Orange / White
Right Front (+) . . . . . Gray
Right Front (-) . . . . . . Gray / Black
Left Front (+) . . . . . . White
Left Front (-) . . . . . . . White / Black
Right Rear (+). . . . . . Violet
Right Rear (-) . . . . . . Violet / Black
Left Rear (+). . . . . . . Green
Left Rear (-) . . . . . . . Green / Black
*NOTE: When Black a wire is not present, ground radio to vehicle chassis.
All colors may not be present on all leads due to manufacturer’s specifications.
METRA / EIA WIRING CODE
FINAL WIRING CONNECTIONS
95-1005
FINAL ASSEMBLY
11
95-1005
NOTES
12
95-1005
NOTES
13
95-1005
NOTES
95-1005 INSTRUCTIONS
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2004-07 METRA ELECTRONICS CORPORATION
INST95-1005
REV. 06/16/11
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Metra 95-1005 Operating instructions

95-1005
Metra
Brand
Metra
Model
95-1005
Category
Car kits
Type
Operating instructions

Metra 95-1005 is a car stereo installation kit for various Kia and Hyundai models from 2002 to 2006. It allows for the installation of a double DIN or stacked ISO DIN head unit in vehicles that originally had a single DIN radio. The kit includes a trim plate, brackets, and hardware for a secure and professional-looking installation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents