QUBINO ZMNHB User manual

USER MANUAL EN.

QUBINO FLUSH 2 RELAY

The Qubino Flush 2 Relay is ideal for remotely controlling up to two electrical devices (door

locks, door openers, small appliances, etc.) or lights.

 EN.               

 
Table of contents 
 
About Qubino ................................................................................................................................................................. 3 
Safety Information ......................................................................................................................................................... 5 
Flush 2 Relay - Available Frequencies ............................................................................................................................ 6 
Where To Buy ................................................................................................................................................................. 7 
Introduction ............................................................................................................................................................... 7 
Use Cases .................................................................................................................................................................... 9 
1. Installation examples where Flush 2 Relay is installed behind a wall switch .................................................... 9 
2. Installation examples where Flush 2 Relay is installed in electrical box .......................................................... 10 
3. Additional features of Flush 2 Relay which can make your life easier............................................................. 11 
Qubino Flush 2 Relay Advantages and Highlights .................................................................................................... 13 
1. Advantages ....................................................................................................................................................... 13 
2. Highlights .......................................................................................................................................................... 16 
Package Contents ..................................................................................................................................................... 17 
Technical Terms for Switches ................................................................................................................................... 18 
Compatibility with Z-Wave Gateways (hubs) ........................................................................................................... 20 
Installation ................................................................................................................................................................ 21 
1. Installing the device behind a light switch ....................................................................................................... 22 
2. Installing the Qubino Temperature Sensor ...................................................................................................... 33 
Device Information and Support .............................................................................................................................. 38 
Electrical Diagram (110 - 240VAC, 24VDC) .............................................................................................................. 39 
Adding the device to a Z-Wave network (Inclusion) .............................................................................................. 40 
Removing the device from a Z-Wave network (Exclusion) .................................................................................... 41 
Associations ............................................................................................................................................................ 42 
Configuration Parameters ...................................................................................................................................... 43 
Technical Specifications ......................................................................................................................................... 52 
Z-Wave Command Classes ..................................................................................................................................... 54 
Important Disclaimer ............................................................................................................................................. 58 
Warning .................................................................................................................................................................. 58 
Regulations ............................................................................................................................................................. 58 
 

EN.

3

About Qubino

Qubino is a family of innovative Z-Wave devices, many of them the smallest of their kind.

Numerous breakthrough innovations, 100% quality control, and responsive customer service

make Qubino the number one choice for making your life more comfortable.

Qubino enables you to transform – inexpensively and invisibly – any traditional electric device

into a smart, connected one that you can control with your smart phone. Qubino devices are

simple to install and use, but also extremely versatile - they offer a wealth of additional features

and parameters for you to play with.

We love helping people who enjoy creating new ideas for their home and then using their hard

work and skill to turn those ideas into reality. We admire their passion and resourcefulness. We

do our best to supply you with products that will enable you to create a unique and special

home for yourself. We innovate so that you can be free to make the smartest home possible.

With just a touch of magic.

"Simple is smart." We believe it is smart to make complex things simple. But only when this

means simple for our customers, not for ourselves. We think a lot so that you won't have to

when it comes to installing or using our devices.

For more information visit: www.qubino.com

EN.

4

About Z-Wave:

The Z-Wave protocol is an interoperable, wireless, RF-based communications technology

designed specifically for control, monitoring, and status reading applications in residential and

light commercial environments. Mature, proven, and broadly deployed (with over 50 million

products sold worldwide), Z-Wave is by far the world market leader in wireless control, bringing

affordable, reliable, and easy-to-use 'smart' products to millions of people in every aspect of

daily life.

Source: www.z-wavealliance.org

EN.

5

Safety Information

For Qubino, safety is first, so we have prepared lots of safety tips and information that can be

found throughout this manual.

To ensure your safety, please read this manual carefully before installing the device; follow

the instructions exactly. The manufacturer (GOAP d.o.o. Nova Gorica) shall not be legally

responsible for any equipment damage or personal injury caused by incorrect installation or

operation other than that covered in this manual.

ⓘ Please check the Technical Specifications and Electrical Diagram chapters, as well as fuse

requirements in the Installation chapter before installing the device.

EN.

6

Flush 2 Relay - Available Frequencies

ORDERING CODE

(MODEL NUMBER)

POWER SUPPLY FREQUENCY

Z-WAVE FREQUENCY*

ZMNHBD1

50/60 Hz

868,4 MHz

ZMNHBD2

50/60 Hz

921,4 MHz

ZMNHBD3

50/60 Hz

908,4 MHz

ZMNHBD4

50/60 Hz

869,0 MHz

ZMNHBD5

50/60 Hz

916,0 MHz

ZMNHBD6

50/60 Hz

868,4 MHz

ZMNHBD7

50/60 Hz

919,8 MHz

ZMNHBD8

50/60 Hz

865,2 MHz

ZMNHBD9

50/60 Hz

922,5 MHz

ZMNHBDA

50/60 Hz

919,7 – 921,7 – 923,7 MHz

ZMNHBDB

50/60 Hz

868,1 MHz

ZMNHBDC

50/60 Hz

868,1 MHz

ZMNHBDD

50/60 Hz

919,8 MHz

ZMNHBDE

50/60 Hz

920,9 MHz

*You can check the Z-Wave frequency in your country here:

https://www.silabs.com/products/wireless/mesh-networking/z-

wave/benefits/technology/global-regions?cid=nat-acq-zwv-041818

EN.

7

Where To Buy

To find your nearest Qubino dealer visit: http://qubino.com/where-to-buy/

1. Introduction

The Flush 2 Relay controls on/off function for two electrical devices (door locks, door openers,

fans, etc.) or lights. It measures power consumption of the connected device, and can be paired

with a digital temperature sensor (sold separately). It supports push-button/momentary

switches and toggle switches (default).

The connection of a digital temperature sensor means you can create complex scenes and

control any device relative to a set temperature range. The Qubino Flush 2 Relay also acts as a

Z-Wave repeater to improve the range and stability of the Z-Wave network.

EN.

8

Flush 2 Relay supported functions:

Turn ON/OFF

Device 1

Turn ON/OFF

Device 2

Turn ON/OFF

Both devices

together

W

Measurement

Device 1

W

Measurement

Device 2

W

Measurement Both

devices together

kWh

Measuremen

t Device 1

kWh

Measurement

Device 2

✓

kWh

Measurement

Both devices

together

Automatically

turn ON/OFF

Device 1

Automatically

turn ON/OFF

Device 2

Automatically

turn ON/OFF

Both devices

together

Temperature

Sensor

Associations

Z-Wave

Repeater

Auto-inclusion

✓

EN.

9

2. Use Cases

The Flush 2 Relay can be used in many different scenes, which can help make your life more

comfortable. We have prepared a few of them for you so you can get an idea for your next

smart home project. Of course, there are countless of other options for how to use Qubino

Flush 2 Relay to remotely control devices via your smartphone.

2.1. Installation examples where Flush 2 Relay is installed behind a wall switch

• Remotely control two lights

• Remotely control ceiling fan and light

• Remotely control wall-mounted fan and

light

• Remotely measure room temperature (*The

temperature sensor is sold separately - for more

info, please see Qubino catalogue. Product ordering

code (model number): ZMNHEA1)

EN.

10

2.2. Installation examples where Flush 2 Relay is installed in electrical box

• Remotely control two irrigation sprinkle

valves - 24 VDC, option 1

• Remotely control two irrigation sprinkle

valves - 24 VDC, option 2

EN.

11

2.3. Additional features of Flush 2 Relay which can make your life easier

• Do you worry that your irrigation system

can expose your garden to flooding?

• Sometimes your Z-Wave gateway (hub)

can stop working while you’re away from

home (no internet connection, power

outage, etc). If you have an irrigation

scene scheduled, your gateway (hub)

might not send an OFF command to your

irrigation system, leaving your garden

flooded and water bill more expensive

than you’d like. The Flush 2 Relay offers

the option to set the timing for irrigation

for a specific amount of time internally; it

then automatically stops watering,

completely independent of your

gateway’s (hub’s) commands.

For the 24VDC use case, please check the chapter above.

• Do you often forget to turn off devices

when you leave your home, like lights in

the basement or attic?

• The Flush 2 Relay can automatically turn

devices/lights on or off after a set period

of time (when you’re away from home).

For example, the lights will automatically

turn off if it’s been on for 8 hours, let’s

say. This function is independent of

other scenes and gateway (hub)

commands.

EN.

12

• Do you know how much energy you

consume?

• The Flush 2 Relay monitors and reports

energy consumption of connected devices in

real time to your smart home app (your

gateway (hub) needs to support this feature).

Know how much power your light or other

connected devices is using.

• Want to control other devices in your

Z-Wave network with the Flush 2

Relay?

• Connect the Flush 2 Relay with other

devices in your network to remotely

and automatically trigger another Z-

Wave device. And have other Z-Wave

devices trigger your Qubino Flush 2

Relay.

EN.

13

3. Qubino Flush 2 Relay Advantages and Highlights

3.1. Advantages

• The Qubino Flush 2 Relay allows the easiest and quickest installation possible. Because

of its small size, it fits smoothly in even the smallest, most shallow and most crowded

flush mounting boxes, which are stuffed with lots of electrical cables and where every

millimetre counts. All this is possible because the Qubino Flush 2 Relay is the smallest Z-

Wave switch in the world.

• The Qubino Flush 2 Relay has the option to connect a temperature sensor*, through

which users can monitor the ambient air or water temperature. It’s the only Z-Wave

switch in the world which offers this option. With a connected sensor, the user can

monitor accurate measurements of the room temperature, pool water temperature,

etc., and remotely change conditions as desired. Qubino relay, along with the

temperature sensor, is connected directly to the power supply. Install it and forget it –

no need to worry about dying batteries, like with battery-powered sensors.

*The temperature sensor is sold separately - for more info, please see Qubino

catalogue. Product ordering code (model number): ZMNHEA1

ⓘ Please do not put the temperature sensor directly into the water! The temperature

sensor is designed to measure the water temperature by being mounted to the water pipe.

EN.

14

• Qubino guarantees 100% device quality. Such high quality can be delivered because

every Qubino goes through rigorous quality control standards throughout the

production process. Every device has a unique serial number and a part number, which

are assigned to the device only after it goes through a strict testing procedure.

• By scanning the QR code on the back of your Qubino device, the serial and part numbers

will be automatically copied on your mobile phone; they also provide direct access to

Qubino’s technical support team. The serial and part numbers of your device are given

automatically every time you open an inquiry with our support team: this instantly

shares the relevant device information we need to provide the best technical support

possible. For details, please see the Device Information and Support chapter.

EN.

15

• The Qubino Flush 2 Relay is engineered and manufactured in the EU, and contains only

the highest quality components.

• The Qubino Flush 2 Relay is certified by an independent European Institute and has CE,

FCC, LVD and EMC certificates to ensure the highest safety standards.

EN.

16

3.2. Highlights

• Remote (via smartphone or PC) and local on/off control of bulbs and other electrical

devices

• Works with push-button (momentary switch) and toggle switch

• Capable of measuring the power consumption of the connected device in real time via

smartphone, which allows you to save on electricity bills*

• Features one of the easiest and quickest installations of devices of this kind; fits in even

the smallest flush mounting boxes

• Saves and restores the last status after a power failure.

• Supports auto-inclusion mode for quick set up

• Can automatically turn devices on and off after a set period of time (helpful when you’re

away from home, for example)*

• Supports additional parameters for expert users, which allows advanced configuration*

• Acts as a signal repeater which improves the range and stability of your Z-Wave network

• Can be used to remotely control and trigger other devices in your Z-Wave network

*Your gateway (hub) needs to support advanced configuration and parameter input if you wish

to use this feature

EN.

17

4. Package Contents

• Flush 2 Relay Device

• Installation Manual

EN.

18

5. Technical Terms for Switches

Symbol

Switch example images

Definition

EU

USA

Qubino

Other

names

Single pole,

single throw

(SPST) - One

switch

controlling one

light / circuit of

lights

One-way

switch

Two-way

switch

(regular

switch)

Toggle

switch

Switch;

Bi-stable

switch

Single pole,

double throw

(SPDT) - Two

switches

controlling the

same light /

circuit of lights

Two-way

switch

Three-way

switch

Two-way

switch

Used when you

have three or

more switches

controlling the

same light

Intermedi-

ate switch

Four-way

switch

Intermedi-

ate switch

Crossover

switch;

Cross

connection

After being

released, it goes

back to its

original state

Momentary switch

Momentary

switch

Monostable

switch;

Push button

EN.

19

Qubino devices are installed into flush mounting boxes behind the switches. You can see some

examples below:

For more information on how to install your device, please refer to the Installation chapter.

EN.

20

6. Compatibility with Z-Wave Gateways (hubs)

Please check compatibility with your Z-Wave gateway (hub) before you purchase this device. If

you don’t see your gateway (hub) in the table below, please contact us at:

http://qubino.com/support/#email.

ⓘ Please note that the gateway (hub) compatibility was tested on 14.3.2018 and it may not

include the latest testing data.

Flush 2 Relay

Q1+Q2

Q1

Q2

W

(Q1)

W

(Q2)

kWh

(Q1)

kWh

(Q2)

Temp

Comments

Domoticz

V3.5877

✓

T

✓

Fibaro HC Lite

v 4.130

✓

O

✓

Set

Multichannel

association in

group 1 for root

device.

Vera Edge v

1.7.2406

✓

O

✓

T

✓

Zipabox1.1.38

✓

T

✓

Z-Wave Me

✓

T

✓

Homeseer

3.0.0.368

X

✓

X

T

✓

Open Z-Wave

✓

T

✓

Piper

✓

✕

T

✕

SmartThings

3rd party

O

✓

O

✓

T

✓

Q2 control

needs additional

handler

installed.

NETIChome

✓

T

✓

Homey

T

Eedomus

✓

T

✓

Jeedom

✓

O

T

✓

Activate the

pooling

(configuration:

Values and

refresh)

Zipatile

✓

T

Devolo

X

✓

X

T

X

Verbund

T

Indigo 7

X

✓

X

✓

T

✓

ImperiHome

✓

T

✓

OpenHab

✓

T

X

Page is loading ...

QUBINO ZMNHB User manual

QUBINO ZMNHB User manual

Related papers

Other documents